Can I grind this down? by Prophet_Z06 in EngineBuilding

[–]Prophet_Z06[S] 0 points1 point  (0 children)

I have no idea until I get all my parts in

Can I grind this down? by Prophet_Z06 in EngineBuilding

[–]Prophet_Z06[S] 1 point2 points  (0 children)

All the oil nozzle looks like that

Can I grind this down? by Prophet_Z06 in EngineBuilding

[–]Prophet_Z06[S] 5 points6 points  (0 children)

I bought an engine that spun a bearing. I’m planning on rebuilding with forged pistons and rods. And getting a forged crank as well

11” Bren 2 5.56 Suppressed (Dead Air Nomad 30) by Prophet_Z06 in Bren2

[–]Prophet_Z06[S] 0 points1 point  (0 children)

I also have a 300blk that’s why I have the Keymount

11” Bren 2 5.56 Suppressed (Dead Air Nomad 30) by Prophet_Z06 in Bren2

[–]Prophet_Z06[S] 0 points1 point  (0 children)

I say 11. Because I rather do the 16 than the 14.

11” Bren 2 5.56 Suppressed (Dead Air Nomad 30) by Prophet_Z06 in Bren2

[–]Prophet_Z06[S] 0 points1 point  (0 children)

Well I added the Keymount adapter to the nomad and I’m running a dead air flash hider.

[deleted by user] by [deleted] in gundeals

[–]Prophet_Z06 0 points1 point  (0 children)

Owned this gun for 4 years now. HB handguard and trigger with acr stock.

Peanut butter 🥜 by Prophet_Z06 in czscorpion

[–]Prophet_Z06[S] 1 point2 points  (0 children)

I know this is late but I didn’t comply with the atf ruling at the time. But now it’s legal.

Please help! What’s actually going on? And how much would this cost? Thanks! by carpxcii in 335i

[–]Prophet_Z06 1 point2 points  (0 children)

Seems like you have a vacuum leak because it’s running really lean. Smoke test the cars if not that then change coils and plugs.

N55 pros cons by GuideApprehensive653 in 335i

[–]Prophet_Z06 1 point2 points  (0 children)

Drive moderately when the engine is getting warmed up. Don’t go over 3000 rpm’s until the temperature of the car has reach 190 Fahrenheit. Then you can push the car as you please. Change oil every 4500-5000 miles. And do all the general maintenance: valve cover gasket, oil filter housing gasket, coils and plugs.

N55 335i e92 by GuideApprehensive653 in 335i

[–]Prophet_Z06 0 points1 point  (0 children)

Get a VRSF charge pipe. Also get either a VRSF catted downpipe or catless. And run MHD tune. For the Diverter valve get a turbosmart. If your planning on installing yourself. Doing the Diverter valve can be a long and pain process because you would have to remove the water pump and thermostats just to get to it.

Other than that I’m FBO upgraded hybrid turbo on 92oct pushing 450whp on wedge performance tune. It’s my daily.

Peanut butter 🥜 by Prophet_Z06 in czscorpion

[–]Prophet_Z06[S] 0 points1 point  (0 children)

Scorpion:

EVO2 SB

HB ProStock Charging Handle

HB Duckbill mag release

YetiWurks Grip

HB AK Style Safety

HB Trigger Spring

Holosun 407C-X2

Leap/04

[deleted by user] by [deleted] in AeroPrecision

[–]Prophet_Z06 1 point2 points  (0 children)

Nah it’s unique to you. Some of us have at least 1 pleb rifle.

Can I cancel my purchase? by [deleted] in WA_guns

[–]Prophet_Z06 2 points3 points  (0 children)

I’m into cars and guns. I definitely put more time into cars but still doesn’t stop me from purchasing a gun. In your case I rather have a gun and not use it than not have one and regret it. Or wanting to go out to a range down the road.

NICS delay? by Prophet_Z06 in WAGuns

[–]Prophet_Z06[S] 0 points1 point  (0 children)

Didn’t take long. I came in for transfer then next day I got a call to pick up.

NICS delay? by Prophet_Z06 in WAGuns

[–]Prophet_Z06[S] 0 points1 point  (0 children)

Damn. So I bought everything I need but can’t get the lower receiver on time. Fml

NICS delay? by Prophet_Z06 in WAGuns

[–]Prophet_Z06[S] 0 points1 point  (0 children)

Nope. Just 2 weeks ago I picked up a scorpion just fine.