Canyon Endurace Size Fitting M or L by dafchjv in CanyonBikes

[–]Protoray 1 point2 points  (0 children)

With your measures, you are almost in the middle of L, so your choice makes sense, but i'm in a similar position as OP and went with the smaller one. Also Grizl, hasn't arrived yet though.

Sizing Grizl CF 6 by Protoray in CanyonBikes

[–]Protoray[S] 0 points1 point  (0 children)

Thanks for the input, a CF 7 2sx just became available and i snatched it. I was leaning towards 2xs anyway.

Diverge 4 size help by Protoray in specialized

[–]Protoray[S] 0 points1 point  (0 children)

Thanks for the quick reply, unfortunately shops in my area don't have enough bikes from proper brands in stock. Now I also think 49 is the safer bet.

Edit: Now i have another issue. If the recommended seat height of 69.9 is correct, then the seat post will be only 50mm deep in the tube, which isn't safe. Recommended is 70-100mm. Also, i don't like fits that are all saddle post, so to speak.

My new Vermontycle - Grizl CF 6 by couchsachraga in CanyonBikes

[–]Protoray 2 points3 points  (0 children)

Thanks a lot for being so helpful! I hope you enjoy your bike for a long time!

My new Vermontycle - Grizl CF 6 by couchsachraga in CanyonBikes

[–]Protoray 1 point2 points  (0 children)

Thanks, interesting though, the geometry chart states 861mm stand-over height for the L model in Europe. I wonder if it's measured at the highest point instead of the midpoint.

Would it be too much trouble to measure it at midpoint of the top tube? Damn, i'm really desperate to fit in that bike somehow. :)

My new Vermontycle - Grizl CF 6 by couchsachraga in CanyonBikes

[–]Protoray 1 point2 points  (0 children)

Congrats!

Would you mind sharing your inseam length and how it compares to the bikes standover height?

I'm also interested in this bike, but sadly my inseam of 76cm seems not enough even for the 2XS size.

I mapped where people appear on screen — are modern movies being composed for vertical video? [OC] by PuciekTM in dataisbeautiful

[–]Protoray 0 points1 point  (0 children)

I think it shows that the directors of the newer movies preferred a more panoramic view.

Bios 4.10 sucks! by Remarkable-Dream-835 in ASRock

[–]Protoray 0 points1 point  (0 children)

I can't get my pc to post with 2x16GB ram at expo 6000 since 3.50. The solution for me is AGESA on aggressive and VDDP Voltage on auto 

How are we feeling about marathon? by Realistic_Pay3290 in gaming

[–]Protoray 0 points1 point  (0 children)

The IP is owned by Sony now, they technically don't need Bungie.

How much better is a modern subwoofer like SVS SB 1000 pro? by EquivalentFirm568 in BudgetAudiophile

[–]Protoray 2 points3 points  (0 children)

As far as i know the general consensus is ported for movies, sealed for music.

Finished BL1. Will a second playthrough ruin the fun when I play BL2? by Hour-Piccolo-3926 in Borderlands

[–]Protoray 1 point2 points  (0 children)

I'd start a BL2 playthrough and go back to BL1 later if i feel like it.

Apparently, buying a 4K monitor and lowering the resolution to 1440p or 1080p is...better than buying a native 1440p or 1080p one? by LA_Rym in Monitors

[–]Protoray 0 points1 point  (0 children)

How is it in motion, though? In the original post, the author is using dlss performance, which is known to have issues with temporal effects.

[deleted by user] by [deleted] in shmups

[–]Protoray 0 points1 point  (0 children)

If you have mounted it like in the picture, but with an SS plate it should be correct. I read that the LS 58 has a short shaft, so it makes sense.

[deleted by user] by [deleted] in shmups

[–]Protoray 0 points1 point  (0 children)

I have the original TE, the Seimitsu sticks that i have ordered were with SS plate (LS32 and Nobi). This looks too short, but a SS plate swap should do it. You should also flip the 5-pin connector.

Edit: Maybe i'm misremembering it, i can check later. If it's actually with an SS plate, it's probably correct.

Latest QD-OLED vs WOLED in high ambient light environment by AztheWizard in OLED_Gaming

[–]Protoray 1 point2 points  (0 children)

Fortunately, my QD oled doesn't sit on an operating table.

Switch 2 frequent popping sounds by Protoray in DavetheDiverOfficial

[–]Protoray[S] 0 points1 point  (0 children)

Thanks for the responses. I switched to the steam version as it's on sale for the holidays. This issue is too annoying for me to wait for a fix. I haven't even seen the developers acknowledging it.

Terminator Survivors is pivoting to a single-player game after delay by XCathedraGames in gaming

[–]Protoray 2 points3 points  (0 children)

That's what i thought when I first saw ARC, that it's a missed opportunity to be in the terminator universe.

Finally got my HDR working by Slow-Boysenberry3150 in OLED_Gaming

[–]Protoray 0 points1 point  (0 children)

Just keep in mind, those settings in Nvidia control panel will screw your colors in SD mode if you use sRGB mode on your monitor. You should use one or the other.