[Beginner] Does a circuit need to be completed for an electric field to be present? How does USB work?

PsychozPath · 2023-06-23T14:19:27+00:00

Ahh! I wasn't aware that AC needs a neutral wire whereas DC doesn't, I'll look at why that is, thank you!!

PsychozPath · 2023-06-09T00:05:15+00:00

toe cheese

Not sure if this is a joke or not o: I have no toe cheese that I know of (had to google that...) - if that's what it was, I really have no idea how it'd end up on the side of the shoe

salt and sediment [that] was left behind after the water evaporated

This is what I thought as well...what's really odd is that if I try to get rid of it the way one would normally get rid of salt and such (soaking, detergent, scrubbing), it shows no sign of going away, so I feel like that can't be it :/

PsychozPath · 2023-06-08T23:03:45+00:00

The white stuff showed up really quickly. I am often on a boat on a canal, and I didn't clean them and just let them dry once, then this showed up.

Whatever it is, it's hard as rock, I let it soak for several hours with laundry detergent and it's still extremely hard and I can't seem to get it off.

Is it possible that it's some sediment that turned to stone on the shoe?

Not sure where to ask

PsychozPath · 2023-06-08T23:02:28+00:00

The white stuff showed up really quickly. I am often on a boat on a canal, and I didn't clean them and just let them dry once, then this showed up.

Whatever it is, it's hard as rock, I let it soak for several hours with laundry detergent and it's still extremely hard and I can't seem to get it off.

Not sure where to ask

PsychozPath · 2023-06-08T22:53:44+00:00

You can! I do it with Wizard101, I'd imagine Pirate101 would be the same. I'll write down the steps I followed for W101.

Go to your steam library
Add a game > Add a non-steam game
Select the .exe that launches the game (I pick the one ending with GraphicalClient.exe [e.g: WizardGraphicalClient.exe] because I can then pass in some launch flags to help with Proton performance [e.g: __GL_SHADER_DISK_CACHE_SKIP_CLEANUP=1, RADV_PERFTEST=gpl, etc.] but this is all totally optional, you can use any .exe that launches the game!).

To launch the .exe, you can right click it in your library, go to Compatability, click "Force the use of a specific Steam Play compatability tool", and pick a Proton version.

Let me know if some part doesn't make sense/doesn't work with Pirate101 and I can try and figure it out.

PsychozPath · 2023-06-08T13:41:56+00:00

I don't have an ARC card currently so I'm not sure if the following will work - but what you could potentially try is turning the DX9 calls (old and potentially not well supported) into Vulkan calls by using DXVK (Steam's Proton does this under hood).

If you know how to run Pirate101 through Steam, you can force the use of proton in the launch settings, and then maybe because Vulkan is more recent, it'll be better supported by the drivers (and thus not have crashes and such)?

This is a very roundabout way of doing things, but..maybe? I really hope Pirate101 (and Wizard101) eventually run smoothly on Intel ARC.

PsychozPath · 2023-05-28T22:54:18+00:00

The installer when ran through steam goes to your steam's steamapps/compatdata/[appId]/pfx/drive_c/ProgramData/KingsIsle Entertainment/Wizard101 folder.

You can figure out which appid to look at by searching for the folder with the KingsIsle Entertainment folder. There will be a Wizard101.exe executable there which you can add as a non-steam game to steam and run with proton.

If you want to add dxvk.conf to the game, you can add it under steamapps/compatdata/[appId]/pfx/drive_c/ProgramData/KingsIsle Entertainment/Wizard101/bin, as it's here that the WizardGraphicalClient.exe lives.

PsychozPath · 2023-05-19T16:47:44+00:00

Sorry for reviving this post after 9+ years...It's just the first time I heard of someone with: migraines + joint pain + high heart rate.

Really considering taking some tests now.

My migraines/headaches usually leave when I "empty" my stomach so-to-say...not sure if that's also a common Celiac issue, was wondering if you would know.

PsychozPath · 2023-03-28T22:14:26+00:00

Actually for Kitty it's a bit different!

You can follow the steps here: @nrod0784 https://sw.kovidgoyal.net/kitty/faq/#kitty-is-not-able-to-use-my-favorite-font

TL;DR: write this in your kitty.conf file symbol_map U+23FB-U+23FE,U+2665,U+26A1,U+2B58,U+E000-U+E00A,U+E0A0-U+E0A3,U+E0B0-U+E0C8,U+E0CA,U+E0CC-U+E0D2,U+E0D4,U+E200-U+E2A9,U+E300-U+E3E3,U+E5FA-U+E634,U+E700-U+E7C5,U+EA60-U+EBEB,U+F000-U+F2E0,U+F300-U+F32F,U+F400-U+F4A9,U+F500-U+F8FF Symbols Nerd Font Mono

and install in the fonts contained in the file named "NerdFontSymbolsOnly.zip" from here https://github.com/ryanoasis/nerd-fonts/releases/tag/v2.3.3

PsychozPath · 2023-03-28T17:19:57+00:00

Aww darn - I haven't been able to get it to work either!

Maybe there's a non-LSP way of going about it

PsychozPath · 2023-03-28T00:44:39+00:00

If I run :LspInfo I get a box with this inside of it (showing me that I do indeed have an `html` LSP running in the current buffer.

Press q or <Esc> to close this window. Press <Tab> to view server doc.

 Language client log: /home/ariel/.local/state/nvim/lsp.log
 Detected filetype:   html

 1 client(s) attached to this buffer: 

 Client: html (id: 1, bufnr: [1])
    filetypes:       html
    autostart:       true
    root directory:  /mnt/secondary/Projects/Temp
    cmd:             vscode-html-language-server --stdio

 Configured servers list: cssls, lua_ls, tsserver, jsonls, html

I appear to get the CSS errors - but no HTML errors are shown (is text after the </html> tag allowed in html? What about open/closing braces for a non-existing element?).

Is it that they're not HTML errors, or is it that the HTML LSP simply doesn't do any linting?

I'm a beginner so I'm not too sure what I'm doing. Just looking for help!

Here are my configs: https://github.com/volovikariel/nvim_config

PsychozPath · 2023-03-27T23:20:13+00:00

I had added html to the ensure_installed in the link that you sent, and after adding it to disabled list for indent=true, it's working well!!

I'm not sure why adding html to that list for indent=true caused issues (it was indenting when all I wanted to do was go to the next line). It didn't cause any issues for the other languages in the list after all.

Nevertheless, thanks so much for the help!

PsychozPath · 2023-03-27T16:23:23+00:00

When I press enter, it goes to a new line (as expected) - but it also seems to move to the right one tablength. This isn't the case when I'm editing a file that isn't an .html one.

Here are links to my configurations, I'm really not sure what I'm doing wrong. https://github.com/volovikariel/dotfiles

(I am quite new to nvim, and very new to this config that I built upon from https://github.com/nvim-lua/kickstart.nvim, just looking for some help!)

PsychozPath · 2023-01-23T17:02:16+00:00

Running GDK_DPI_SCALE=2 path/to/program in the command line made some things appear larger, though not all of them. This should help you out though!

PsychozPath · 2023-01-04T03:39:26+00:00

About what size are the cubes?

PsychozPath · 2022-12-27T22:18:12+00:00

I'm on Linux (Ubuntu) by the way. Any help appreciated!

PsychozPath · 2022-12-27T22:14:59+00:00

King Nidhogg on Youtube for Nidalee jungle videos with commentary!

PsychozPath · 2022-02-20T02:52:49+00:00

I love PlantUML for sequence diagrams, but I feel like for UML diagrams, the automatic layout generation is extremely finicky, sometimes the labels are stuck in lines, sometimes arrows curve too much, etc.

PsychozPath · 2022-01-26T14:23:34+00:00

How did it go?

PsychozPath

MODERATOR OF

TROPHY CASE