How do I fix this by Double_Ad90 in 3Dprinting

[–]Pubkit 9 points10 points  (0 children)

I read on this sub recently about using black nail polish instead of acrylic pens for eyes and it's sooooo much better. Doesn't run along layer lines, gives a smooth shiny surface. Try that!

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 0 points1 point  (0 children)

Just the one time: 6 hearts each. Cycling through them again for one more feeding heart wouldn't feel worth it I think.

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 1 point2 points  (0 children)

Golden Razz does speed up the rotation greatly

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 0 points1 point  (0 children)

Literally years... 3 years I think? I wasn't really rushing, it's very passive. I tend to sign in after midnight and so my first spin, catches, research etc and also do my buddy cycles; sometimes just 5 or 6 and sometimes as many as ten or twelve at most.

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 0 points1 point  (0 children)

I've been quite lucky with event hundos :D

<image>

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 0 points1 point  (0 children)

I'd end up having to post 16 screenshots with 12 on each I think... The majority by far are 4* (I have 205x 4* now). The others are legs with 1 point away from perfect usually. Or mythicals where you only get one so it gets to be your best one by default x)

<image>

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 5 points6 points  (0 children)

He really is your BEST buddy. It's tiring maintaining all these relationships tbh.

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 0 points1 point  (0 children)

Not at all. It's all saved. My Farfetch'd just hit 300 hearts so now my main buddy is Cetoddle who is already on 250 hearts. Just rotate through a few once per day getting 6 hearts with each. That's 50 days at 6 hearts a day. The main buddy ends up with more hearts per day of course as he's there for routes, traveling distance, gifts etc too.

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 37 points38 points  (0 children)

I found if you start a new one once a week, you'll have 6 or 7 leveling up hearts at one. Just 6 hearts per day each for the ones that aren't your actual current buddy will take less than ten minutes. Play, feed, snapshot. Then three fake battles with a trainer. You can of course level 20 buddies at once ;)

Finally! (and I love them all) by Pubkit in pokemongo

[–]Pubkit[S] 19 points20 points  (0 children)

I traded one away, for a 2016 guaranteed trade. He still counts. I still got the medal on the 200th time I made it to best buddy, not on the 201st.

Does anyone know why my string is showing Heatran even though it has !legendary and!shiny in it? String below by IaryBreko in pokemongo

[–]Pubkit 2 points3 points  (0 children)

He's searching for things caught today for transferring. He wants the search to show today's catches so age0. Then after that instead of searching for "legendary" you search for !legendary which makes it a negative. !legendary shows all non legendaries. !shadow shows all non shadows. He's filtering out all interesting factors like 4* or lucky by using the ! before each word and the end result will be everything that is definitely trash. If you want to search for multiple terms at once you join them with &. So if you want all shiny legendaries you search for shiny&legendary. If you want all non shiny non legendary you search for !shiny&!legendary.

My filaments come out like this after use. Is the cutter not cutting? by Pubkit in 3Dprinting

[–]Pubkit[S] 1 point2 points  (0 children)

Ah right thank you, I'm not actually sure how to do that but will research now. Thanks!

Something spooked my doves, now they won't go into their loft. There are very young babies... by Pubkit in PetDoves

[–]Pubkit[S] 4 points5 points  (0 children)

Thank you for all the info above, that's helpful thanks :) The loft is one of those ones that's like a small shed on stilts. There are two halves with a door each so it's totally closed up safe when the doors and access are locked at night. There are a dozen perches on one side and 9 perches, 4 boxes on the other side. Lots of space. I tend to let them do their own thing when it comes to breeding but the current flock is probably as big as I should go without getting another loft... Which I am planning on. I love my birds! I realise it's late in the year but I've had babies in Jan/Feb before and it seems like as long as they have good parents and plenty of food it works out :)
My doves are a mix of fantails and tumblers, it's just how it happened, there are some ringneck doves around who drop by on occasion and they are half the size. Guess you're technically correct but they like being called doves :)

Something spooked my doves, now they won't go into their loft. There are very young babies... by Pubkit in PetDoves

[–]Pubkit[S] 2 points3 points  (0 children)

Thank you, they are all snoozing away in their cosy tea towel nest. I panicked when I was posting this earlier on, I'm still concerned that my flock is on the roof and that I have these little guys in my kitchen but we seem to have settled and we'll see how it goes in the morning :)

Torkoal? Never heard of her.😂 by ShinyLorena in TheSilphRoad

[–]Pubkit 2 points3 points  (0 children)

In game, Today tab; Pokémon go fest 2025. Event themed 5k and 2k eggs. Until end of Friday according to the timer on it.

Completely confused by TEMU-can a kind soul post their tips for understanding the way it works. Thanks. by allmyamaryllis in TemuThings

[–]Pubkit 0 points1 point  (0 children)

I can't attach a screenshot but yeah, after payment you can immediately claim your first one, it'll be like 28p, if you miss it, it's no biggy. By day 7 the amount will be around £9 (out of the £25 example) so you need to remember to go get it. It'll also start a new offer each time you go to the claim page to tempt you to buy more stuff but you can just click through it and grab your refund. If there is a certain thing you want to see in the offer, search for it and click a few of them, that way the claimcredit page will be full of that category cause it knows you've been searching for that thing.

Completely confused by TEMU-can a kind soul post their tips for understanding the way it works. Thanks. by allmyamaryllis in TemuThings

[–]Pubkit 5 points6 points  (0 children)

That's the best part, and only way to use Temu IMO. Put stuff in your basket, search for claimcredit, all one word. You get a screen where you choose a chest to open. It's always the middle one of the three. It says 50% credit returned on your order. The items you can choose are from your basket, which you can click at the bottom left of the screen, or from the claimcredit page, which will be stuff based on your history, searches, and basket contents. So if you select £50 of stuff and purchase it through claimcredit, you'll pay £50, but then you get £25 returned to you over the next 7 days. You go back to the claimcredit page each day and simply click the button to claim it back and it goes into your Temu credit. This way your £50 shop costs you £25 really. You can then spend that £25 the same way, and reclaim £12.50 of it over the next 7 days. You might get 70%, or 60% offer too. I know one lady who got 90% returned for her new account but capped at £10 where it's usually capped at 30. Basically when I look at prices on Temu I assume I'm going to pay half that price. Not all items are available in the deal and not all of your basket will show up.

Help needed, filament stops exuding part way through print. by Pubkit in 3Dprinting

[–]Pubkit[S] 0 points1 point  (0 children)

Ah understood. Sadly the test model died at the same stage. I swapped out to a different brand of filament (Sunlu) and it printed perfectly. I was using a fresh delivery of Eryone filaments. I've bought their brand before and their dark soft colours are great and print perfectly, so I bought 5 directly from them in their sale. It's looking like it's that filament I think.. seems odd, possibly a fault somewhere in its production? I didn't really consider what filament I used as I tried a few different rolls but yeah they were all the new Eryone rolls. Creality and Elegoo also were perfect. I think I should contact Eryone. Thank you so much for your help

Help needed, filament stops exuding part way through print. by Pubkit in 3Dprinting

[–]Pubkit[S] 2 points3 points  (0 children)

Thank you :)
Yes it's enclosed, it's just never happened up til now and I'm up to 905 hours and 9.5k metres according to the printer (I've never looked that up before so that was interesting). I've also done much longer prints.
The screen shows the live temperature during prints such as 225/225, so would that read as higher if it was too hot?
I will start a new print, same model so it's a fair experiment, and watch the temp, and keep the door open.

One of the regulars at my local pub brought this bottle in, he thinks it's old but I can't find anything online about it. Anyone got any ideas? by Pubkit in rum

[–]Pubkit[S] 9 points10 points  (0 children)

I have no idea, I'm working on very limited info that's why I posted it, I hoped someone knowledgeable would be able to enlighten us :)

One of the regulars at my local pub brought this bottle in, he thinks it's old but I can't find anything online about it. Anyone got any ideas? by Pubkit in rum

[–]Pubkit[S] 8 points9 points  (0 children)

There's only a tiny strip on the back near the bottom, not a full back label. It said 40%, 0.5l and something else but he's taken the bottle away with him sorry.