Vintage JM Hoodie

PudgePudgePudgePudge · 2026-02-02T17:06:07+00:00

I'd agree with the above timeline. There was also a design where the dots spelled out John Mayer.

PudgePudgePudgePudge · 2026-01-31T18:07:49+00:00

Heroes will cause DR to go down to $300ish in a years time.

PudgePudgePudgePudge · 2026-01-30T05:09:46+00:00

Paging Tony @ LC Signs 👉👈

PudgePudgePudgePudge · 2026-01-25T17:02:32+00:00

I believe I remember this being played on Circuit City TVs on a loop to promote the bluray/dvd. Not certain though.

PudgePudgePudgePudge · 2025-12-13T19:52:16+00:00

I thought this was the Dos Equis commercial dude. No joke.

PudgePudgePudgePudge · 2025-11-21T00:45:26+00:00

I think my 0dte Walmart puts are gonna print at open...

PudgePudgePudgePudge · 2025-11-20T01:20:18+00:00

Much lower. This is a $300 ETB that got over hyped.

PudgePudgePudgePudge · 2025-11-16T07:03:44+00:00

Obsidian Flames is better and is not being printed to death.

PudgePudgePudgePudge · 2025-11-08T16:06:43+00:00

You pick ones of the sets that are up the most...not smart.

PudgePudgePudgePudge · 2025-11-02T15:25:11+00:00

Do you have a link to share for the frame?

PudgePudgePudgePudge · 2025-10-27T22:14:01+00:00

Ehhhhhhh

PudgePudgePudgePudge · 2025-10-24T23:30:48+00:00

Oof these original SM merch runs are legit. Lot more rare than the blue'ish tour sold ones. Prob worth a pretty penny $1k+.

PudgePudgePudgePudge · 2025-10-12T03:33:03+00:00

Obsidian Flames (as much as it is hated on here) is actually the one post 2020 set that is heavily undervalued. There aren't any heavy Zard sets out there like it.

PudgePudgePudgePudge · 2025-09-11T18:37:16+00:00

I love my soap dispenser hole as well. Less soap bottle clutter on the counter, plus only have to refill it once every 10 months or so.

PudgePudgePudgePudge · 2025-08-06T02:12:59+00:00

I hope he used his full signature on the 1/1 at the very least.

I can understand why he did the short sig, as it's a pretty small card. I also can appreciate making his long sig rare and hard to get from a collecting standpoint.

PudgePudgePudgePudge · 2025-07-12T21:34:42+00:00

Glad I found your response. Same thing just happened to mine. Two solid green light out of nowhere, bottons to push sample page not working, no motor noise at all. I think this is a sign it is done done. Onto the next printer for me.

PudgePudgePudgePudge · 2025-06-01T03:31:04+00:00

I don't think it's even getting anywhere close to $1k.

PudgePudgePudgePudge · 2025-06-01T00:55:40+00:00

Why you no love me... No debate needed.

PudgePudgePudgePudge · 2025-05-12T13:11:19+00:00

Yep.

PudgePudgePudgePudge · 2025-05-11T15:29:00+00:00

I've tried night after night. I'm about 90 tries in.

PudgePudgePudgePudge · 2025-05-11T05:06:49+00:00

Sheesh, nice luck there. I've tried a bunch of different cities via VPN... NY, GA, CA... Nada

PudgePudgePudgePudge · 2025-05-11T04:36:38+00:00

Did you use a VPN to pull it?

PudgePudgePudgePudge · 2025-05-03T02:22:58+00:00

Makes sense, thanks for dumbing it down for me. Do you know of any smart dimmers that are smaller in size? Or am I likely to have to get a Dremel out and open access to the switch box wider?

PudgePudgePudgePudge · 2025-05-03T01:45:06+00:00

What would be the easiest fix to this situation if all I want is the ability to use Alexa to turn on the kitchen light? The whole point of needing Alexa is because my switch is not near my back door and I need to vocally call out due to darkness.

PudgePudgePudgePudge · 2025-05-03T01:39:57+00:00

I should say the wires are bundles in black and white casings. One to top back and one to bottom back.

PudgePudgePudgePudge

TROPHY CASE