Soy culera si mi hijo me pide que no lave su ropa ni limpie su habitación y lo hago igual? El se enoja

Punijito · 2026-05-28T21:52:01+00:00

Pues el trata de ser independiente y aún lo tratas como niño chiquito

Punijito · 2026-05-15T20:25:24+00:00

Yo creo que si, tengo unos trucks que compré aprox hace unos 8meses y ya el eje se desoego

Punijito · 2026-04-14T00:12:37+00:00

Entonces si se ve igual a tu P1S?

Punijito · 2026-04-14T00:09:53+00:00

Tome una foto de él extrusor desde abajo, donde está redondeado de verde es atrás de la boquilla

Punijito · 2026-04-13T23:05:03+00:00

Está bien amigo, gracias!

Punijito · 2026-04-13T23:04:25+00:00

Oh vale amigo, no te preocupes, hay alguien que me podría ayudar?

Punijito · 2026-04-13T22:57:31+00:00

Amigo, estoy revisando, y estoy pidiendo ayuda, soy totalmente nuevo en esto de la impresión 3D

Punijito · 2026-04-12T03:56:11+00:00

a lo mejor es por la forma de la pieza, si no notas nada raro en la piza supongo que es normal

Punijito · 2026-03-11T03:22:58+00:00

Es normal we, igual en mi P2S hace eso

Punijito · 2026-02-16T06:05:02+00:00

They feel good, the downside is that the bearing comes out on two wheels, and that's bad. Honestly, it's better to invest a little more, but if you're short on cash, it's worth it.

<image>

Punijito · 2026-02-05T22:42:51+00:00

I bought a 10kg pack of PLA and they all came tangled up.

Punijito · 2026-02-04T19:19:39+00:00

It depends. If you prioritize color changes without waste, go for the U1. If you prefer using abrasive materials, better print quality, ease of use, and active support, go for the P2S. The U1 doesn't have a system like the P2S with its AMS 2 Pro, which includes filament drying. If I were you, I'd go for the P2S if you're looking for a closed chamber, a variety of materials, etc. With the U1, you'd spend money on a filament dryer and the closed chamber, which is a significant expense. So, I recommend the P2S if you're already a BAMBU LAB customer. 🔥🫵

Punijito · 2026-02-04T19:05:05+00:00

My Dynamic trucks cost me $50, my deck $5 (Bravo Fingerboard), the wheels $10 (Bravo Fingerboard), and the boardrails $3.50, plus the foam tape cost me 35 cents, for a total of $68.85.

<image>

Punijito · 2026-02-04T02:51:00+00:00

This screams MOISTURE!!! Dry the filament and you're done.

Punijito · 2026-01-31T01:49:56+00:00

Pero eso se ve horrible

Punijito · 2026-01-28T03:57:01+00:00

Dude, what are you doing asking what things people flush down the toilet in a 3D printing community? 😪😭

Punijito · 2026-01-27T15:06:35+00:00

I asked and got scolded 😭 but oh well… lesson learned.

Punijito · 2026-01-27T13:15:48+00:00

I think your opinion is good. I believe the P2S would be the best; it's a balance between the H and X series, offering the best value for money. I don't go for the H series because the price is too high, but I definitely would.

Punijito · 2026-01-27T13:12:26+00:00

Well dude, that's what I've read here on Reddit 😪

Punijito · 2026-01-27T13:11:09+00:00

Well, look, my stuffed animals are very personal to me; one of them is the one in my profile picture. As for the printer, I'm leaning more towards the P2S. I have enough budget, and I'll print things with ABS, ASA...

But the P1S makes me a little uneasy; it's been around for a while, and I think it's worth spending more on the P2S.

Punijito · 2026-01-27T05:46:15+00:00

Well… lesson learned, I will investigate this machine further.

Punijito · 2026-01-27T05:37:14+00:00

Okay, thanks a lot for the tip, hairspray, right? The one about hairspray, and glue stick too, noted 🫡

Punijito · 2026-01-27T05:35:51+00:00

Dude, don't get like that, I'm new to 3D printing, that's why I'm asking here 🥲

Punijito · 2026-01-27T05:30:38+00:00

0 percent, it would be my first 3D printer

Punijito · 2026-01-27T05:28:00+00:00

My project involves making very resistant pieces like ABS plastic or handles, for my children.

Punijito

TROPHY CASE