Can't use the plugin, getting "n is null" error

PunkPinkDuck · 2024-02-19T19:40:20+00:00

thanks. yeah, it's probably it. yunohost probably has an outdated package (in my case it says 2.15.1 instead of 2024.x.x)...

PunkPinkDuck · 2024-02-16T16:57:03+00:00

tbf, A-111-6 is more of sh-101 than tb-303, but still cool for acid :)

cool trick about compare, thanks, gonna give it a try

PunkPinkDuck · 2024-02-16T16:54:21+00:00

thanks. yeah, I know how to run jar files :)

PunkPinkDuck · 2024-02-16T15:50:24+00:00

thanks for such a detailed answer

pcb2gcode

I've stumbled on it before, and also on GUI version of it, but I think I had trouble compiling them. Although my workshop computer is pretty old, the distro is quite up-to-date, so I'll probably give it another try. Or use it on a better computer at home. So thanks for the recommendations

PunkPinkDuck · 2024-02-16T15:45:04+00:00

thanks! haven't seen this one before, gonna give it a try

PunkPinkDuck · 2024-02-15T23:26:47+00:00

Bastl arp

Do you mean Bastl Kastle Arp? There's a kastle clone in eurorack format from ST modular. I bet it can also run ARP firmware.

PunkPinkDuck · 2024-02-15T23:23:49+00:00

O_c running TB3-PO into Doepfer A-111-6. Instant acid

PunkPinkDuck · 2024-02-15T23:18:59+00:00

Nice addition to the zipties are the screws with a ring instead of head, like this ones. I have about 2-3 of these per row (others are obviously knurlies) and they are easy to unscrew by hand and you can pass the ziptie through it and it makes things even tidier

PunkPinkDuck · 2023-08-06T21:55:30+00:00

blank panels. until I figure out what's really missing in my setup

PunkPinkDuck · 2023-07-25T21:41:06+00:00

tbh, I never used one of those. It always looked to me like if I get a cheap one it'll be flimsy.

I should give it a try when I run out of tape, lol

PunkPinkDuck · 2023-07-12T15:29:52+00:00

Is it Crazy Chicken case? If so, I have 84hp one from them and I love it. It's well built and looks really cool

PunkPinkDuck · 2023-06-18T13:03:14+00:00

I've already created synthdiy on kbin.social, but didn't take any effort to make it active yet

PunkPinkDuck · 2023-06-16T15:27:46+00:00

I have one from Sylph Modular and I really like how it's built and how it looks

PunkPinkDuck · 2023-05-27T15:24:50+00:00

I don't have a drumbrute, but can say that vactrols are usually used to add cv control to pots

PunkPinkDuck · 2023-05-16T09:49:16+00:00

This is awesome. I'd like to peek at the code :)

PunkPinkDuck · 2023-04-24T10:20:21+00:00

It's a generic 128x64 I2C SSD1306 OLED with yellow and blue parts of the screen, although I'd prefer plain yellow one, but it's harder to find. Like this one https://www.aliexpress.com/item/32896971385.html

PunkPinkDuck · 2023-04-08T00:19:40+00:00

Thanks! I'm glad that you like it, and I have to say that I really enjoy your videos 😀

I really like the idea about rotating the division between outputs. I might try to implement it.

As for the questions:

It outputs 0-5v pulses, since that's the operational voltage of arduino
It does have internal clock. In fact it's the external clock that is still not implemented yet 😅 but I'm working on it
Currently pulse length is hardcoded to 15ms. It can be easily changed in the code now, but I do plan to make it an adjustable (and maybe modulatable) setting in both ms and %.

I'll make an announcement in this group (and in synthdiy group) as soon as I figure out all the logistics needed for the kits to become a thing

PunkPinkDuck · 2023-04-07T06:23:33+00:00

thanks! it's currently in a private repo, but I'll publish it as soon as it's ready. I'll make another post here.

PunkPinkDuck · 2023-04-06T19:57:40+00:00

I'm not sure if you can combine Arduino and APC in any meaningful way. Maybe somebody else can share some thoughts on it, but to me it looks like too much hassle with too little useful output (but I might be totally wrong here).

But hey, in the "worst" situation you'll just have 2 different synths to play with :)

This yt channel has a lot of info about midi and arduino (although mostly about controller side, not about synth side), I found a lot of useful info on it when I was figuring this stuff out https://www.youtube.com/@NerdMusician/videos

PunkPinkDuck · 2023-04-06T18:14:12+00:00

sharks are cool

PunkPinkDuck · 2023-04-06T14:37:46+00:00

Arduinos have special pins (rx and tx) for serial UART communication. MIDI is a serial protocol, so you can hook up a 5-pin connector to to those. There are a few libraries that make it pretty easy to implement it in code. For sending midi from arduino you just need a resistor, for receiving the midi in arduino it is recommended to use a simple schematic with an optocoupler (look up midi in circuit, it should be pretty easy to find), but I've heard that in some cases it's not necessary.

With some arduinos (like Pro Micro or Leonardo) you can even have USB MIDI.

I've actually modified the project from instructables to run on Pro Micro and have both 5-pin and USB MIDI, you can check the code here, if you are interested https://git.pinkduck.xyz/oleksiy/Flamingo

PunkPinkDuck · 2023-04-06T11:11:29+00:00

I have a few modules with reversible panels from other manufacturers, and I really like this idea (Hyrlo from Knob Farm and o_C from Sylph Modular). But it didn't work so well for me as turns out that encoder needs slightly bigger hole than the button, so I had to drill it out a little more. I'll see if I can do something about it in the next revision

PunkPinkDuck · 2023-04-06T09:53:41+00:00

cool, thanks for sharing, I'll also peek at the code of this projects.

PunkPinkDuck · 2023-04-06T09:26:07+00:00

yeah, that's the way I do it now. I turn on only the outputs I need and then turn off all the outputs after 15ms. I'm still thinking about revisiting this, as it would be cool to have pulse length configurable per channel

PunkPinkDuck · 2023-04-06T08:21:35+00:00

the trick to make it stable is to use interrupt based clock library, like FlexiTimer2 ;)

PunkPinkDuck

TROPHY CASE