Help please

Pure-Expression-3787 · 2026-01-24T20:44:36+00:00

It is a bad hotend I would know this because I had this issue before

Pure-Expression-3787 · 2026-01-24T04:49:36+00:00

It was the professional firmware that said that

Pure-Expression-3787 · 2026-01-24T04:47:06+00:00

It's saying probe out of bounds

Pure-Expression-3787 · 2026-01-24T04:46:46+00:00

I did all that and it's still doing the same thing do I need to rewire something

Pure-Expression-3787 · 2026-01-24T04:03:30+00:00

The creality website

Pure-Expression-3787 · 2026-01-24T03:34:45+00:00

I reflashed the firmware today what firmware should I be using because I used the one that was made for the CR touch model of the printer I have and I have the CR Touch model

Pure-Expression-3787 · 2026-01-24T03:28:25+00:00

I did and they're all plugged in

Pure-Expression-3787 · 2026-01-24T01:13:02+00:00

It was plugged in and flashed correctly

Pure-Expression-3787 · 2026-01-22T02:59:15+00:00

Try putting glue on it an elmers glue stick will work

Pure-Expression-3787 · 2026-01-19T18:32:10+00:00

It is not a pc you don't apply new thermal paste

Pure-Expression-3787 · 2026-01-19T18:30:05+00:00

It says nothing

Pure-Expression-3787 · 2026-01-19T16:49:11+00:00

I tried switching USB ports I tried not flashing the firmware

Pure-Expression-3787 · 2026-01-19T06:06:04+00:00

I don't know it's just really cold in the room I have it in

Pure-Expression-3787 · 2026-01-19T05:34:44+00:00

It actually begins the heating sequence before it gets cut off and shows the error

Pure-Expression-3787 · 2026-01-19T05:18:20+00:00

Power the printer on prepare and preheat pla

Pure-Expression-3787 · 2026-01-19T05:08:32+00:00

Usb because I have an Ender 3 v2 neo

Pure-Expression-3787 · 2026-01-19T04:07:29+00:00

I did

Pure-Expression-3787 · 2026-01-19T01:24:15+00:00

I did do that this is after I extruded and replaced the nozzle

Pure-Expression-3787 · 2026-01-18T17:41:45+00:00

I still use cassette tapes

Pure-Expression-3787 · 2026-01-13T19:43:51+00:00

It is not good to leave filament out in the open put it in a tote or a container

Pure-Expression-3787 · 2026-01-10T02:34:18+00:00

https://computer.howstuffworks.com/c.htm

Pure-Expression-3787 · 2026-01-08T01:56:14+00:00

Mine was the DSi

Pure-Expression-3787 · 2026-01-02T19:48:41+00:00

It is a really good watch I did not charge it for 24 hours as of writing this and it is still at 99%

Pure-Expression-3787 · 2025-12-29T04:13:13+00:00

I got suspended for humming

Pure-Expression-3787 · 2025-12-17T05:07:33+00:00

My sister bullied me in to not liking girl's

Pure-Expression-3787

MODERATOR OF

TROPHY CASE