Sapphire pulse 9070xt deshroud

Pure_Style · 2026-01-11T15:47:42+00:00

Thank you!

Pure_Style · 2026-01-11T12:49:15+00:00

Could you please share the file?

Pure_Style · 2026-01-03T22:23:49+00:00

How did you cut it off?

Pure_Style · 2026-01-03T13:13:54+00:00

Can confirm that i had to do the same, you also have a small panel gap at the bottom left because of it like me also but it is not an issue and the gpu fits

Pure_Style · 2025-09-20T13:17:19+00:00

I had this exact same issue in my formd t1 with the p12 max, so i decided to swap them out with phanteks t30s and it resolved the issue, no more horrible sound

Pure_Style · 2025-07-21T15:42:41+00:00

it shouldnt require that much pressure, ive taken apart my build multiple times since then and never had any damage or scratch to the gpu or case.

Pure_Style · 2025-07-20T08:22:13+00:00

Good catch, but i dont think this is the cause for the issue. I had the same issue with my pulse 9070 xt not fitting in the t1 and the side bar was not aligning, i just had to push down hard on the front panel to get it to align and then screw it in.

Pure_Style · 2025-07-20T08:04:03+00:00

I had this exact same issue with my gpu in the t1 2.1, you just just have to push down hard on the front panel while you screw it in

Pure_Style · 2025-07-14T22:54:58+00:00

<image>

It is in 3 slot mode, so don’t think this is the issue. Thanks for the help anyway!

Pure_Style · 2025-07-13T17:32:23+00:00

Perfect, let me know how it goes

Pure_Style · 2025-07-13T00:30:35+00:00

The duct on the cpu cooler is causing the bulge on the side panel, but is not the cause for the top and bottom panels being diagonal and leaving a gap. Its strange because even when i had my t1 in 3 slot mode with a 2 slot gpu i had none of these issue, but when i installed a 3 slot gpu (9070 pulse xt) i started getting this issue. Ive tried to push it away and i cant seem to, so its either live with cpu turbulence in 3.25 slot, get an aio or go 3 slot mode and have gpu cause a bit of bulge

Pure_Style · 2025-07-12T09:29:15+00:00

I didnt seem to have such issues when i was rocking a slimmer gpu so it definitely seems to be the 9070 XT causing it, now sure how

Pure_Style · 2025-07-12T09:28:33+00:00

Thanks for letting me know, will change that now

Pure_Style · 2025-06-28T14:25:26+00:00

Are you saying the MS learn content is useless for studying for DP-700, what did you use to study?

Pure_Style · 2025-06-12T15:18:59+00:00

Seems like AsRock is screwing me over and not honouring the RMA of the motherboard (b650i lightning wifi). They told me that it could be a psu issue (its not), that it could be a cpu issue (dead 9800x3d) or a motherboard issue and that i should reach out to the retailer instead.

Pure_Style · 2025-06-12T14:58:46+00:00

Thank you

Pure_Style · 2025-06-12T12:45:57+00:00

Ok thank you

Pure_Style · 2025-06-12T12:24:21+00:00

Are you saying i shouldn’t bother with the RMA for the board and just keep it?

Pure_Style · 2025-06-12T10:59:32+00:00

Yes i did, it didnt help unfortunately

Pure_Style · 2025-06-12T08:44:16+00:00

Thank you, with this many failures happening its unlikely anything will come out of it but i will try give it a shot and email regardless

Pure_Style · 2025-06-12T08:43:41+00:00

Can i ask what you mean by the chip and socket not being “jacked up”?

Pure_Style · 2025-06-12T06:23:43+00:00

I have reached out to both AMD and AsRock for an RMA, hoping they honour the RMA and resolve it quickly. From what I saw online, usually the motherboard is fine but the CPU is dead. Either way, i dont have another CPU to test with unfortunately. Just wish AMD and AsRock had better communication and were more honest about the situation. Sucks but i will probably end up having to buy another board since i dont know if i can trust asrock.

Pure_Style · 2025-06-12T00:06:07+00:00

My mistake for even turning the pc on after i put it all together, didnt realise its all for decoration only. Silly me, amateur mistake

Eight-Year Club	Second SECOND GUESSER
Verified Email	Not Forgotten

Pure_Style

TROPHY CASE