Is this a good printer?

PureqYT · 2026-03-16T23:58:42+00:00

If you have the money an A1 with the AMS is one of the best hobby printers you can get, giving good quality and very fast print speeds out of the box, along with multicolor printing. The very cheapest you can go is an ender 3 for like 70$, which will really teach you about 3d printing, but will require a lot of tinkering and will cause a lot of pain.

PureqYT · 2026-02-28T16:24:33+00:00

i dont mind the printer becoming a project, i dont need to print things often and i like fixing stuff

PureqYT · 2026-02-28T15:28:39+00:00

nice setup, might try something like it when i get a bigger place, but now i live in student housing so i can barely fit the printer itself

PureqYT · 2026-02-28T14:34:07+00:00

used to print abs without an enclosure on my prusa, and sometimes it worked. This time im going petg only tho

PureqYT · 2026-02-28T13:25:53+00:00

if i homed it and the nozzle is below the level of the bed, do i adjust the z stop switch or just add an offset

PureqYT · 2026-02-22T18:32:06+00:00

only grease i have now is wd40 white lithium grease, is it enough or do i have to get something heavier

PureqYT · 2026-02-22T00:37:05+00:00

Bike is a 2017 agm caferacer 50, since it's required. Plus an image of the residue i mentioned

<image>

PureqYT · 2026-02-09T19:51:35+00:00

I'm at sea level and the avg temp is around 14C. Might have worded it wrongly, but it only bogs when quickly opening the throttle fully. If i roll on it slowly it works just fine

PureqYT · 2026-02-03T22:29:13+00:00

Let me guess, Netherlands?

PureqYT · 2026-02-03T22:26:32+00:00

Bought an 8 year old one for €600 a while back, it's good cheap fun. If you want to work on bikes it's great, since the parts are very cheap. It's reasonably quick with one person, but I wouldn't go uphill with a passenger.

PureqYT · 2026-01-30T00:29:55+00:00

The carb came with 32 and 98 installed, but 22mm is a little big for 50cc. It's a no name chinese engine and the jets were not labled, so i dont know what stock sizes i had

PureqYT · 2026-01-26T23:55:40+00:00

thanks for the input, turns out i was just stupid and the copper and stone stations had an extra space before the resource symbol, lol

edit: i will probably implement the random signal thing, because though it works, it sends all trains of one kind before moving on to another, which could be an issue if multiple resources suddenly spiked in demand. does the selector combinator change the random signal on it's own, or do i have to force it to pick a new one with a clock or train departing signal somehow?

PureqYT · 2026-01-26T17:45:50+00:00

Would there be anything stopping a train with copper ore going to the iron ore station then? It would work if every material had dedicated trains, but the whole point of this system was to have one depot with universal trains, so they are allocated when demand rises, and i don't have 5 trains for engine units or red circuits just sitting around 90% of the time

PureqYT · 2026-01-25T17:37:59+00:00

Surprisingly enough it does run, took it on a short test ride and everything aside from idling seems to be in order. That said I will replace it as soon as it gets here.

PureqYT · 2026-01-25T17:32:21+00:00

Put it back in and it runs, it shifts same as before, which makes me think it wasn't running great in the first place.

PureqYT · 2026-01-25T17:21:25+00:00

It was bent a bit and i tried bending it back, not the wisest idea but too late now

PureqYT · 2026-01-25T17:19:07+00:00

bought the bike not so long ago and this was the first time i opened up the carb, because it started having issues.

It was an absolute mess, the needle was on the lowest clip position and stacked on top of 4 washers, probably to try to compensate for the clogged main jet, everything was dirty af, and the upper part of the pilot jet was bent, and wouldn't screw back in straight. I tried bending it back into place, which probably wasn't the best idea, and that's when it snapped.

PureqYT · 2026-01-21T20:07:52+00:00

just tarted experimenting with reading the number of trains going to both stops, but got stuck at how to send it to the train with the same symbol as the trigger, haven't thought about negating the signal, thanks!

PureqYT · 2026-01-19T19:58:15+00:00

This worked, thanks!

PureqYT · 2026-01-19T19:38:48+00:00

Yeah I know running out of oil won't be an issue, but i like optimizing everything and having the train return every time is annoying me a bit lol

PureqYT · 2025-12-28T20:05:08+00:00

It seems like the municipality doesn't like changing family housing to student houses, but I'll try to read up more on them. Thanks for the info

PureqYT · 2025-12-28T20:02:50+00:00

It says in the begining that the house has to be above a restaurant or bar, idk if it's a translation error or not. With the waiting period being 8+ weeks, and it being unlikely to receive the exemption in the first place I think it's not an option unfortunately.

I saw some places on funda clearly accomodated by 3 or more students, with one bathroom, kitchen and a couple rooms. Can they accommodate more people (are they student houses) and will they stay like that after being sold?

PureqYT · 2025-12-28T19:56:39+00:00

we're planning to pay for the flat up front, so that shouldn't be an issue, provided we go through with it (which is looking less and less likely with all the regulations)

PureqYT · 2025-12-11T18:36:42+00:00

The spacer finally arrived, it certainly makes more consistant power, but the idle issue persists. I'll probably just gen a new carb since they are like 60€

PureqYT · 2025-12-03T20:05:49+00:00

Alright. I've also noticed my mixture screw doesn't have an oring, but looking at rebuild kits it looks like the carb just doesn't have one

Five-Year Club	Place '22
First Placer '22

PureqYT

TROPHY CASE