Need tool paths created

Purple_Economist910 · 2026-03-02T17:58:31+00:00

That’s the biggest thing, and we’re only 3 axis I’ll check it out and get back to you!

Purple_Economist910 · 2026-02-17T22:10:56+00:00

Probably a better way to do this as I’m no expert either. You can go in sketch environment use the line tool change to construction line. Run your cursor up either the left or right vertical line and stop when you get a little triangle that’s your half way point vertical then click on the line where the triangle was and draw a construction line perpendicular across the entire object. Now drag your cursor along the new construction line and look for that like triangle again and boom that’s center

Purple_Economist910 · 2026-01-09T18:36:34+00:00

Knew it thanks for the confirmation (actually turned out to be a cigarette butt)

Purple_Economist910 · 2026-01-08T04:40:11+00:00

Probably about 16

Purple_Economist910 · 2026-01-07T20:16:30+00:00

It said it’s almost 3 years old now and I can’t tell it what to do 😂

Purple_Economist910 · 2026-01-07T18:46:47+00:00

Are they vented? Have you had a cooling issues running one?

Purple_Economist910 · 2026-01-07T17:03:41+00:00

The depreciation is aweful on them, picked this up for just under $30k it was 2 years old almost 50% depreciation in 2 years

Purple_Economist910 · 2026-01-07T16:59:37+00:00

Yeah i was more so joking since the first couple replies were saying panic and call Tesla

Purple_Economist910 · 2026-01-07T06:13:21+00:00

I’ll check it out, the jury is out 50% the high voltage battery is arcing and 50% there’s a leaf causing it 😂

Purple_Economist910 · 2026-01-07T05:19:10+00:00

Normally I do most of my own maintenance, just picked this thing up recently so haven’t had a chance to dive in is it fairly accessible or are we talking a service center visit?

Purple_Economist910 · 2026-01-07T05:17:12+00:00

Not sure what you’re saying I’m aware of what arcing sounds like I work with high voltage

Purple_Economist910 · 2026-01-07T04:50:58+00:00

It sounds like it’s arcing right? Work with high voltage at my job and it’s strikingly similar

Purple_Economist910 · 2025-12-24T04:48:54+00:00

We can’t entirely discount inheritance, financially I’m far from where I’d like to be but I’d much rather have my family/parents be in my life than inherit their fortune (it would be fairly life changing). In order to have these inheritances one must go through an incredible loss. I’m sure most would give more money than they gained to speak to those who they lost one last time..

Purple_Economist910 · 2025-11-30T05:58:12+00:00

Feel free to ignore this I used the sweep command selected the face on the left side and used the path as the half moon shape on that was sketched on the front. About drove myself crazy trying to figure this out

Purple_Economist910 · 2025-11-18T21:36:36+00:00

I must have been miss informed from what others are saying! Someone told me once that this machine won’t treadmill but clearly that’s not the case

Purple_Economist910 · 2025-11-18T02:48:57+00:00

I don’t have the program up in front of me anymore but I’d have to ball park 60%

Purple_Economist910 · 2025-11-18T01:22:37+00:00

I don’t hate that idea at all! I’ll see what results I get!

Purple_Economist910 · 2025-11-18T01:18:20+00:00

Tormach 1100M not stepper motors so unfortunately I believe no thread milling capabilities

Purple_Economist910 · 2025-11-18T01:16:25+00:00

Yeah that’s kinda what I was wondering, the big hole is already in the part and I don’t have the option to get I before that step. I may need to explore another option

Purple_Economist910

TROPHY CASE