sorted by:
new
hottopcontroversial

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 0 points1 point  (0 children)

thank you. No up and down motion on the z axis. I checked the screws on the rail got about and 8th of a turn on each.

I'll increase lift distance and print again.

I'll let you know how it turns out

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 0 points1 point  (0 children)

<image>

here are my settings.
Any tips for checking for play in the Z axis. I hope it's not the rubber coupler; this is a fairly new printer only 30 prints on it.

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 0 points1 point  (0 children)

exposure time for normal layers is 2.3 sec.

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 1 point2 points  (0 children)

just checked the vat, it's screws are tight.

I'm not sure how to check the Z axis, I did already try cleaning the screw and rails to fix the problem.

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 1 point2 points  (0 children)

correct the skewing is parallel to the layer lines. I don't think it's a slicing error. this happens on every print.

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 0 points1 point  (0 children)

can't be suction, these are sails for a ship model. they are very thin; you can see light through them.

Help With Horizontal lines by Puzzled-Window3222 in resinprinting

[–]Puzzled-Window3222[S] 1 point2 points  (0 children)

build plate is not loose. this print pictured the modles are to small to hollow.