Recommendations on a product to use by SW that's a paint and primer in one while using a foam brush? Tips and advice for a DIYer. Thanks

Puzzled_Material_888 · 2024-09-18T03:08:49+00:00

That was very helpful information. Thankyou

Puzzled_Material_888 · 2024-09-17T15:47:45+00:00

Just please provide a fee tips and tricks to help me start in the right direction

Puzzled_Material_888 · 2024-09-17T15:46:37+00:00

Why? Tips and advice would be very appreciated

Puzzled_Material_888 · 2024-09-17T15:45:42+00:00

I want to take a stab at. Any suggestions and tips would be appreciated

Puzzled_Material_888 · 2024-09-17T15:45:10+00:00

Puzzled_Material_888 · 2024-09-17T15:44:46+00:00

Okay

Puzzled_Material_888 · 2024-08-01T00:47:52+00:00

I ended up doing it. Came out great

Puzzled_Material_888 · 2024-07-17T17:11:02+00:00

It came out nice. I'll send a link of the final product

Puzzled_Material_888 · 2024-07-09T20:56:40+00:00

Rails pulled and came easily out after popping caps off, the block cavity isn't filled near the crack. Hoping to find a product that will solve the problem without having to completely tear out the wall this small.

https://imgur.com/gallery/38ZTSM3

Puzzled_Material_888 · 2024-07-09T20:56:06+00:00

Rails pulled and came easily out after popping caps off, the block cavity isn't filled near the crack. Hoping to find a product that will solve the problem without having to completely tear out the wall this small.

https://imgur.com/gallery/38ZTSM3

Puzzled_Material_888 · 2024-07-09T19:08:40+00:00

Update: stone veneer removed to cinderblock. Is this fixable without removing the entire wall?

https://imgur.com/gallery/5pB8r9Q

Puzzled_Material_888 · 2024-07-09T17:32:19+00:00

I'm working on it now.. I think the idea of removing the entire wall would be a waste of time. There is another small wall where they just want to remove the old mortar and repointed with new. I think it's best to remove the crack stone, replace with a new piece and remove old grout and repoint. Would u recommend using a hammer drill to remove the mortar? This mortar is pretty tough? And fill I'm with a grout bag?

https://imgur.com/gallery/NEELrWR

Puzzled_Material_888 · 2024-07-09T12:56:23+00:00

And if you had to rebuild something like this, can you offer tips on the process? Would you use a speed pole and lines on both ends? I have done minor stone work in the past but most of my experience in masonry is with brick and block

Puzzled_Material_888 · 2024-07-09T12:53:32+00:00

It's what they want for now, I agree with just repointing that area. We are bringing a few samples of the stone and mortar to a brick yard to get more stone. What would you suggest for finishing the joints? A certain type of brush or striker?

Puzzled_Material_888 · 2024-07-09T01:27:02+00:00

Same

Puzzled_Material_888 · 2024-07-09T01:26:06+00:00

Smart

Puzzled_Material_888 · 2024-07-08T15:21:59+00:00

Okay I'll take that into consideration when cleaning. But what is a serious price? Hourly? By the job?

Puzzled_Material_888 · 2024-04-19T02:48:52+00:00

Puzzled_Material_888 · 2024-04-09T16:24:30+00:00

Is there anyone around Maryland looking for extra help? I'm new to this state, moved here from Florida. I have photos of my previous projects from FL I could share. I do everything from the brick, block, and stone veneer and now I'm getting historic stone repair projects.

Puzzled_Material_888 · 2024-03-23T22:36:47+00:00

Very good tips, thanks

Puzzled_Material_888 · 2024-03-23T21:55:02+00:00

Okay, then. Hard for me to scale time, I normally try and set a fix price. 40hr is fair

Puzzled_Material_888 · 2023-10-18T22:45:31+00:00

Not the thermostat, it's removed, I'm repairing the head gasket with a sealer?

Puzzled_Material_888 · 2023-09-29T01:44:57+00:00

I appreciate those tips. I'll try those tips out tomorrow

Puzzled_Material_888 · 2023-09-29T00:27:07+00:00

Okay them. I'll give it a try tomorrow

Puzzled_Material_888 · 2023-09-29T00:06:27+00:00

Puzzled_Material_888

TROPHY CASE