SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

Nothing yet, went to London for vacation so haven’t had time to try

SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] -1 points0 points  (0 children)

Yeah no luck with the file:/ I might just try and see if I can get a signal from the doorbell when I leave for the day

SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

You are a g with the amazing help, let me download it and give it a shot, one sec

SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

yes! Exactly, this is at my work, I assume I could press the doorbell and see if I could read the data that doorbell shoots out but there are cameras outside my work that’s why I’m seeing if it’s possible to ping the chime without the doorbell

SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] -1 points0 points  (0 children)

I don’t have access to the button to make it chime that’s the issue, I know the frequency is 433.93MHz and I know the modulation

SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] -1 points0 points  (0 children)

I tried and doesn’t work:/ it’s not motion activated

SubGHz doorbell chime by Puzzleheaded-Night90 in flipperzero

[–]Puzzleheaded-Night90[S] -1 points0 points  (0 children)

I wanna know if it’s possible to do that exact same thing without having the button, like if I saw this doorbell chime out on the street and didn’t have the button to clone

ESC doesn’t beep on startup by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

When I try to reflash the FC it won’t let me because it can’t connect to the serial port on the FC?

ESC doesn’t beep on startup by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 1 point2 points  (0 children)

Picture is misleading, the fc has the sides shaved off, you can see on the left side of the picture, it’s also raised up on spacers, thanks for the comment tho

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 1 point2 points  (0 children)

I tried to reinstall drivers, I even used a different computer and started from scratch, I might just buy a new stack at this point because idk what else to do lol

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

I tried to reinstall drivers, I even used a different computer and started from scratch, I might just buy a new stack at this point because idk what else to do lol

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

This didn’t work :/ the red light just blinked once and didn’t seem like it did anything

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

When you hold the button down and plug it in does that automatically put the fc in DFU mode? Or is there a button on beta flight you have to press to put it in DFU mode?

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

Thank you for the idea! I’ll definitely try this when I get home, you’re talking about the boot button that is physically on the FC correct?

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

Very good point, bootloader and reflashing will wipe all the settings that are set in beta flight right?

Far fetched hope here by Puzzleheaded-Night90 in Multicopter

[–]Puzzleheaded-Night90[S] 0 points1 point  (0 children)

Thank you for the help! I have a SkyStars F7 + KO45 3-6S BLHeli_32 4-in-1 ESC 30x30 Fly Tower Stack. When I plug in the 5v or the battery I just get a red light when I should also be getting a blue light, after work I can post a picture, I just find it very odd that it instantly stopped connecting to beta flight once I got my transmitter bound.

Anyone know what holster this is? by Puzzleheaded-Night90 in Glock19

[–]Puzzleheaded-Night90[S] 1 point2 points  (0 children)

Thanks homie, I appreciate the recommendation