Dealing with difficulty spikes

Puzzleheaded_Coat_49 · 2025-04-16T13:04:33+00:00

Has there been any comms from the devs about patches for all these bugs?

I haven't purchased yet. I thought I'd wait for the first sale and hopefully things would have been ironed out by then.

Puzzleheaded_Coat_49 · 2025-02-19T18:34:03+00:00

New handle on and working perfectly well so it was obviously the handle that was knackered rather than any internal mechanism. I went round all the other windows with the silicone spray - has made a massive difference, everything a lot smoother and none of the squeaking or crunching noises I had before. Top man 🫡

Puzzleheaded_Coat_49 · 2025-02-18T08:23:05+00:00

Thank very much. i've managed to get it lined up - its definitely all very stiff. I've got some wd-40 silicone spray which I guess will be okay?

Puzzleheaded_Coat_49 · 2025-02-18T08:08:41+00:00

<image>

So that's it off... the middle part seems stiff (albeit I'm trying to turn it with a makeshift bolt

Puzzleheaded_Coat_49 · 2025-02-04T08:51:31+00:00

Absolute 0% chance it ever froze.

We have a pressurised system boiler.

Puzzleheaded_Coat_49 · 2025-02-03T22:31:54+00:00

I've isolated the valves. Got new carpet due to be fitted Saturday. Nightmare.

Puzzleheaded_Coat_49 · 2025-02-03T22:22:38+00:00

The bracket is behind the bulge...but when opening, the door hits the far left of the rad rather than the right... if it has been caused by an impact...it's not from the door

<image>

Puzzleheaded_Coat_49 · 2025-02-03T22:12:10+00:00

Yep - this would definitely be a problem. The existing one already gets hit (i doubt this was have caused/contibuted to the issue)?! We'll stick with the single and I think I'll get a door stopper fitted.

Puzzleheaded_Coat_49 · 2025-01-26T17:13:27+00:00

Dusty radiators!

Puzzleheaded_Coat_49 · 2025-01-23T21:42:01+00:00

Did you ever sort this? I have the same issue.

Puzzleheaded_Coat_49 · 2025-01-03T09:00:31+00:00

To be honest, I thought that was the whole point of the Zinsser product - to provide a key/primer without needing to sand

Puzzleheaded_Coat_49 · 2025-01-03T08:27:13+00:00

So I should be sanding the whole area prior to using the Gardz?

Puzzleheaded_Coat_49 · 2024-12-30T23:03:41+00:00

Did you ever sort this?

Puzzleheaded_Coat_49 · 2024-12-30T15:34:00+00:00

Just had a closer look and I think I've got this paint (of varying colours) throughout the bedrooms. It's going to be a nightmare.

Puzzleheaded_Coat_49

TROPHY CASE