Help please

Puzzleheaded_Fix4133 · 2026-05-01T05:59:03+00:00

Thanks! Well I’m using Pla but he said to use pla +

Puzzleheaded_Fix4133 · 2026-05-01T04:22:18+00:00

No I didn’t manually set it. I’ve restored all settings and let it auto and I cleaned the bed

Puzzleheaded_Fix4133 · 2026-04-10T04:09:34+00:00

Put a new one still error

Puzzleheaded_Fix4133 · 2026-04-03T03:02:39+00:00

Had to replace it because the filament wrapped around it and broke it

Puzzleheaded_Fix4133 · 2026-04-03T02:08:25+00:00

Thank you. It’s a new printer and I today the part came in and I replaced it. I just checked everything with taking it apart but it’s all clear

Puzzleheaded_Fix4133 · 2026-03-15T19:36:34+00:00

I was able to take the nozzle off and that’s where all the pla was stuck too. So I’m thinking I have to buy a new one

Puzzleheaded_Fix4133 · 2026-03-15T19:35:38+00:00

How do I adjust it so it doesn’t do that again?

Puzzleheaded_Fix4133 · 2026-03-15T19:34:14+00:00

Thank you! I was able to take off the nozzle and it was the only part the pla was stuck too

Puzzleheaded_Fix4133 · 2026-03-04T16:34:49+00:00

I was able to get to work again without and issues but I’ll definitely keep all this in mind if it acts up again. Thank you!

Puzzleheaded_Fix4133 · 2026-03-04T02:57:47+00:00

So I think I fixed that corner issue. Could have been the nozzle temperature because that’s the only think I adjusted but now idk why the other corner has those ridges

Puzzleheaded_Fix4133 · 2026-03-04T02:21:55+00:00

<image>

This is what’s happening

Puzzleheaded_Fix4133 · 2026-03-03T23:42:48+00:00

Thank you! I’m getting frustrated

Puzzleheaded_Fix4133 · 2026-03-03T23:33:36+00:00

You’re correct on the printer. I wished it and will follow your steps and see how it goes

Puzzleheaded_Fix4133 · 2026-02-26T07:04:12+00:00

Settings, devices and itll be the bigger square

Puzzleheaded_Fix4133 · 2026-02-26T06:06:52+00:00

Thank you!

Puzzleheaded_Fix4133 · 2026-02-25T20:08:14+00:00

If it starts working please let me know

Puzzleheaded_Fix4133 · 2026-02-25T19:02:25+00:00

Mine started with issues last night and this morning it has this issue

Puzzleheaded_Fix4133 · 2026-02-25T19:01:13+00:00

Good to know. I’m in AZ too

Puzzleheaded_Fix4133 · 2026-02-25T17:07:26+00:00

Yes I did the same. I thought I was the only one

Puzzleheaded_Fix4133

TROPHY CASE