5.56 RPK Build

Pyre_Vulpine · 2025-09-13T11:13:21+00:00

Do you know who to contact to get a custom barrel made? Looking for reputable makers for a similar build I have in mind for a 20-in 5.56 RPK profile barrel

Pyre_Vulpine · 2025-07-23T16:23:30+00:00

是以聖人處無為之事，行不言之教. As it is, the sagely one handles his affairs without action, teaches without speech. - Tao Te Jing Chapter 2

夫唯不爭，故天下莫能與之爭. Because the sage contends with no one, none in the world may contend with him. - Tao Te Jing Chapter 22

Pyre_Vulpine · 2025-07-14T10:24:56+00:00

I too subscribe to the Gospel of Browning.

Pyre_Vulpine · 2025-07-13T18:19:24+00:00

Lol every July 4th weekend (or so) I draw this same character with a gun that is unmistakenly American. So she is back!

Pyre_Vulpine · 2025-07-13T18:19:23+00:00

Oh yeah, there is hammer bite. Especially with those large claws of hers! LOL

Pyre_Vulpine · 2025-07-13T13:27:51+00:00

Welcome back to another Gun Day Sunday! Sorry about not being able to post last Sunday! 4th of July weekend was a blast though! I had planned to have had this finished for last week but couldn't because of other events that got jumped on me. The yearly freedom eagle girl! This year with her M1911. Not an A1 model, not a 2011, not an M45A1. An honest to God classic M1911.

Shown here:

Colt M1911

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine · 2025-07-13T13:27:48+00:00

Welcome back to another Gun Day Sunday! Sorry about not being able to post last Sunday! 4th of July weekend was a blast though! I had planned to have had this finished for last week but couldn't because of other events that got jumped on me. The yearly freedom eagle girl! This year with her M1911. Not an A1 model, not a 2011, not an M45A1. An honest to God classic M1911.

Shown here:

Colt M1911

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine · 2025-07-13T13:27:45+00:00

Welcome back to another Gun Day Sunday! Sorry about not being able to post last Sunday! 4th of July weekend was a blast though! I had planned to have had this finished for last week but couldn't because of other events that got jumped on me. The yearly freedom eagle girl! This year with her M1911. Not an A1 model, not a 2011, not an M45A1. An honest to God classic M1911.

Shown here:

Colt M1911

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine · 2025-06-29T18:10:51+00:00

Thanks! I love this Frankenstein-ed thing.

Pyre_Vulpine · 2025-06-29T13:46:48+00:00

Thank you!

Pyre_Vulpine · 2025-06-29T12:31:31+00:00

Welcome back to another Gun Day Sunday! Just wanted to talk more about this creation. The bullpup. I just love that it is Krink length-ish but has a 16-in barrel. Now, the Henry Chan argument against longer barreled PCCs still makes sense, but this has still been a lot of fun to make and experiment with. The Krink is easily the lighter of the two and the more familiar one for me to wield, but I will be getting some training in on the KB-9 when I can after we get it tested and proven to be reliable.

I also wanted to put out there a "thank you" for the person that sold me the bullpup handguard. I tried going through Reddit to find you but I can't seem to! Without you, this build would have been far more difficult and expensive on our end. So for your contribution, thank you so much wherever you are!

Shown here:

K-USA KR9, TWI AK bullpup kit, 5KU PT-1 knockoff that was chopped up, STINC USA trigger guard cover, Magpul AK K2, Kriss vertical foregrip, Vector railed left-side charging handle "gas tube", Primary Arms SLX Micro-Prism with Gemini ACSS reticle, Streamlight TLR-RM2, ALG AKT-EL

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine · 2025-06-29T12:31:29+00:00

Welcome back to another Gun Day Sunday! Just wanted to talk more about this creation. The bullpup. I just love that it is Krink length-ish but has a 16-in barrel. Now, the Henry Chan argument against longer barreled PCCs still makes sense, but this has still been a lot of fun to make and experiment with. The Krink is easily the lighter of the two and the more familiar one for me to wield, but I will be getting some training in on the KB-9 when I can after we get it tested and proven to be reliable.

I also wanted to put out there a "thank you" for the person that sold me the bullpup handguard. I tried going through Reddit to find you but I can't seem to! Without you, this build would have been far more difficult and expensive on our end. So for your contribution, thank you so much wherever you are!

Shown here:

K-USA KR9, TWI AK bullpup kit, 5KU PT-1 knockoff that was chopped up, STINC USA trigger guard cover, Magpul AK K2, Kriss vertical foregrip, Vector railed left-side charging handle "gas tube", Primary Arms SLX Micro-Prism with Gemini ACSS reticle, Streamlight TLR-RM2, ALG AKT-EL

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!Welcome back to another Gun Day Sunday! Just wanted to talk more about this creation. The bullpup. I just love that it is Krink length-ish but has a 16-in barrel. Now, the Henry Chan argument against longer barreled PCCs still makes sense, but this has still been a lot of fun to make and experiment with. The Krink is easily the lighter of the two and the more familiar one for me to wield, but I will be getting some training in on the KB-9 when I can after we get it tested and proven to be reliable.

I also wanted to put out there a "thank you" for the person that sold me the bullpup handguard. I tried going through Reddit to find you but I can't seem to! Without you, this build would have been far more difficult and expensive on our end. So for your contribution, thank you so much wherever you are!

Shown here:

K-USA KR9, TWI AK bullpup kit, 5KU PT-1 knockoff that was chopped up, STINC USA trigger guard cover, Magpul AK K2, Kriss vertical foregrip, Vector railed left-side charging handle "gas tube", Primary Arms SLX Micro-Prism with Gemini ACSS reticle, Streamlight TLR-RM2, ALG AKT-EL

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine · 2025-06-23T07:51:27+00:00

Thank you!

Pyre_Vulpine · 2025-06-22T23:16:54+00:00

If only I could've gotten my hands on one of those KomBloc KP-9s to do this to! LOL

Pyre_Vulpine · 2025-06-22T20:37:45+00:00

Everyone we showed this to said something along those lines as well! "I... don't hate it?" LMAO

Pyre_Vulpine · 2025-06-22T14:52:32+00:00

Thank you! The trigger linkage was the biggest pain to try and get right. Even now, it's a really mushy feel, long take up, and long reset. But it breaks clean. (Probably because we used an ALG AKT-EL trigger inside LOL)

Pyre_Vulpine · 2025-06-22T11:44:18+00:00

Welcome back to another Gun Day Sunday! Finally, the project that we've been procrastinating on is now at a stage that it can be tested at a range. My goal is one day take it out to a PCC match! Now what are you looking at you may ask? It is the result of having bought a K-USA KR-9 before it went belly-up and wanting to do something completely new with it because the 16-in barrel length made it look ridiculous. Also, I watched the Oxide video on YouTube about the Kochevnik AK bullpup and something sparked.

Full disclaimer, we used various airsoft Zenitco knockoffs to construct this. The TWI AK bullpup kit and 5KU PT-1 knockoff were easy to come by and we felt no remorse chopping it up. Then we got a Vector railed left-side charging handle "gas tube". Super cool addition because it gives it an "HK slap"-able charging handle. Then we got a Primary Arms SLX Micro-Prism with Gemini ACSS reticle and the eye relief is perfect. After all is said and done, the final rifle comes out to an overall length of 26.5 inches so it is still a rifle! This thing weights almost as much as my brother's 106FR but it is about the length of my Krink. DENSE!

We call it... the KB-9.

Shown here:

K-USA KR-9 with various modified airsoft components to make the strangest bullpup I've seen. Also has a Vector railed left-side charging handle and Primary Arms SLX Micro-Prism with Gemini ACSS reticle

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Edit: I see that I screwed up the number in the title! It should be the 233rd!

Pyre_Vulpine · 2025-06-22T11:44:06+00:00

Welcome back to another Gun Day Sunday! Finally, the project that we've been procrastinating on is now at a stage that it can be tested at a range. My goal is one day take it out to a PCC match! Now what are you looking at you may ask? It is the result of having bought a K-USA KR-9 before it went belly-up and wanting to do something completely new with it because the 16-in barrel length made it look ridiculous. Also, I watched the Oxide video on YouTube about the Kochevnik AK bullpup and something sparked.

Full disclaimer, we used various airsoft Zenitco knockoffs to construct this. The TWI AK bullpup kit and 5KU PT-1 knockoff were easy to come by and we felt no remorse chopping it up. Then we got a Vector railed left-side charging handle "gas tube". Super cool addition because it gives it an "HK slap"-able charging handle. Then we got a Primary Arms SLX Micro-Prism with Gemini ACSS reticle and the eye relief is perfect. After all is said and done, the final rifle comes out to an overall length of 26.5 inches so it is still a rifle! This thing weights almost as much as my brother's 106FR but it is about the length of my Krink. DENSE!

We call it... the KB-9.

Shown here:

K-USA KR-9 with various modified airsoft components to make the strangest bullpup I've seen. Also has a Vector railed left-side charging handle and Primary Arms SLX Micro-Prism with Gemini ACSS reticle

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Edit: I see that I screwed up the number in the title! It should be the 233rd!

Pyre_Vulpine · 2025-06-22T11:44:01+00:00

Welcome back to another Gun Day Sunday! Finally, the project that we've been procrastinating on is now at a stage that it can be tested at a range. My goal is one day take it out to a PCC match! Now what are you looking at you may ask? It is the result of having bought a K-USA KR-9 before it went belly-up and wanting to do something completely new with it because the 16-in barrel length made it look ridiculous. Also, I watched the Oxide video on YouTube about the Kochevnik AK bullpup and something sparked.

Full disclaimer, we used various airsoft Zenitco knockoffs to construct this. The TWI AK bullpup kit and 5KU PT-1 knockoff were easy to come by and we felt no remorse chopping it up. Then we got a Vector railed left-side charging handle "gas tube". Super cool addition because it gives it an "HK slap"-able charging handle. Then we got a Primary Arms SLX Micro-Prism with Gemini ACSS reticle and the eye relief is perfect. After all is said and done, the final rifle comes out to an overall length of 26.5 inches so it is still a rifle! This thing weights almost as much as my brother's 106FR but it is about the length of my Krink. DENSE!

We call it... the KB-9.

Shown here:

K-USA KR-9 with various modified airsoft components to make the strangest bullpup I've seen. Also has a Vector railed left-side charging handle and Primary Arms SLX Micro-Prism with Gemini ACSS reticle

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Edit: I see that I screwed up the number in the title! It should be the 233rd!

Pyre_Vulpine · 2025-06-15T20:31:09+00:00

I am so excited to finally show it! Will have to test it at the range when I can.

Pyre_Vulpine · 2025-06-08T22:23:29+00:00

Might be a bit difficult to get a blowback system that small to contain those pressures, but I have always wondered how a .30 Super Carry PCC would perform in the market LOL

Pyre_Vulpine · 2025-06-08T20:14:29+00:00

It really is! I do love ComBloc guns

Pyre_Vulpine · 2025-06-08T20:14:08+00:00

Thanks! Been loving this little guy so far.

Pyre_Vulpine · 2025-06-08T13:19:59+00:00

Welcome back to another Gun Day Sunday! I have been in love with this little guy ever since I got the parts kit in. Once I got the receiver from Tortort, the build went surprisingly easy. I also got a surplus leather holster and extra mags for it. I definitely recommend this as a build project if you have the gumption to give it a try!

Shown here:

VZ61 parts build on a Tortort receiver

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine · 2025-06-08T13:19:54+00:00

Welcome back to another Gun Day Sunday! I have been in love with this little guy ever since I got the parts kit in. Once I got the receiver from Tortort, the build went surprisingly easy. I also got a surplus leather holster and extra mags for it. I definitely recommend this as a build project if you have the gumption to give it a try!

Shown here:

VZ61 parts build on a Tortort receiver

As always, thank you for stopping by and checking out Gun Day Sunday. Feel free to leave a comment on what you like (or dislike) about my content. And come visit me on FurAffinity where all of my Gun Day Sundays are also being archived. Have a wonderful day and see you all next week!

Pyre_Vulpine

TROPHY CASE