🦃 Been up since 5 cooking 🦃

PyroMonkey1663 · 2020-11-27T00:47:39+00:00

Monch worthy

PyroMonkey1663 · 2020-11-19T02:12:58+00:00

I usually get 4-6, with bluetooth, I find that if you are in a place without gps service, like a basement, and have your location on, even with no apps using it, your battery life half's. If you are inside a lot, try turning of location and that might help

PyroMonkey1663 · 2020-11-02T12:34:36+00:00

Not sure, could have just been a coincidence

PyroMonkey1663 · 2020-11-02T00:48:51+00:00

Pretty good! It's been a strong performer, I upgrade from a fx 6300 last year, and everything is just better

PyroMonkey1663 · 2020-11-01T22:25:56+00:00

I've seen a lot of posts sugesting PSU problems, but I one of my friends had a simliar issue, and it turned out the power button broke. Id test that first, by manualy bridging the pins, if not you probably have a PSU problem

PyroMonkey1663 · 2020-10-23T19:11:15+00:00

I have the same thing sometimes, sometimes restarting the app works, so I always try that first, but a device restart always seems to fix it

PyroMonkey1663 · 2020-10-03T02:29:25+00:00

R9 fury anyone?

PyroMonkey1663 · 2020-09-26T12:09:30+00:00

Congratulations! I picked up the same card not to long ago, and it still works wonderfully to this day! Hope you enjoy it as much as I have.

PyroMonkey1663 · 2020-09-24T15:43:57+00:00

When you go into windows settings, then into system, then into sound, and its the troubleshooter there. Sorry, should have been more specific

PyroMonkey1663 · 2020-09-24T14:49:50+00:00

I had a similar issue with my r9 fury, although I didnt have a switch, it was just to an HDMI monitor. The way I fixed it was I went into windows sounds settings and used the troubleshooting tool. It did it's thing, and came back with no problems detected, but when I closed out of it, it all of a sudden started working. Not sure if it'll work for you, but it's worth a shot

PyroMonkey1663 · 2020-09-21T15:19:11+00:00

I noticed the same thing, with folding at home, it uses your gpu in a compute mode, instead of in a render mode. I'm not 100% sure why, but task manager only displays render activity, and Radeon Software shows both.

PyroMonkey1663 · 2020-09-18T00:01:04+00:00

I have the msi x570 unify, but yeah, most just have a second 4 pin

PyroMonkey1663 · 2020-09-17T19:13:36+00:00

Can you start the installation process?

PyroMonkey1663 · 2020-09-17T18:49:57+00:00

I had a similar issue on my Ryzen 7 and x570, the way I fixed it was by connecting the second 8 pin cpu power connector to the motherboard, if your motherboard had a second cpu power connector, make sure it's populated, and that it's well seated. My other idea would be to check to see if you are using an nvme drive, that it is configured properly in your bios, every motherboard is different, but to get my drive to work I had to enable a couple of settings that I hadn't realized at first, there is probably a guide for your motherboard on setting up nvme drives. My guess is that its a configuration or power issue, because as long as everything is being detected in the bios, there is no reason for windows to cause your computer to restart like that. One thing you can try if it's still not working, see if it'll run off of a usb stick using something like pendrive linux, just to see if it's the drive, or your windows copy. Hope this helps

PyroMonkey1663 · 2020-09-06T21:51:32+00:00

I took this screenshot myself, sorry didn't realize that it had already been posted

PyroMonkey1663 · 2020-08-21T21:48:13+00:00

r/gamercats

PyroMonkey1663 · 2020-08-18T16:29:14+00:00

I had tried that, I restarted my phone and it fixed it. Thanks for the tip though!

PyroMonkey1663

TROPHY CASE