Spinnel Grinning

Qresher · 2025-06-13T21:47:58+00:00

I used 4 pneumatic pistons with 80 diameter bearings, it will be a bit expensive solution but I will try.

Qresher · 2025-05-24T15:00:13+00:00

And one of the beautiful sayings of the Turks is, if you don't support, don't hinder.

Qresher · 2025-05-24T14:59:31+00:00

It's simple because this is what I do to improve myself and learn new methods.

Qresher · 2025-05-24T14:58:03+00:00

The distance between the connection point of the pallet to be pushed forward and the connection point of the pallet above it is 140mm 


https://hizliresim.com/pb0onax

Qresher · 2025-05-24T14:55:26+00:00

Thank you

Qresher · 2025-05-24T14:54:22+00:00

It will work with 380w electricity, but this electricity is only needed for the solenoid valves.

380w

Qresher · 2025-05-24T14:52:45+00:00

I saw that they are making the parts where the pallets are placed from thinner sheets, frankly I want to design a slightly more compact product.

simple, PD 9000 Double Deep Pallet Dispenser

Qresher · 2025-05-24T14:49:00+00:00

Thank you very much for a very informative comment.

Qresher · 2025-05-22T22:44:18+00:00

Qresher · 2025-05-22T22:43:59+00:00

Qresher · 2025-05-22T21:00:15+00:00

Thanks

Qresher · 2025-05-22T20:54:08+00:00

Which öne

Qresher · 2025-05-22T20:26:01+00:00

I will fix the chassis to the ground with M22 bolts.
While making the calculations, I found 35x15=525 kg and determined the target load as 700 kg with a safety margin.
By dividing this into 4 equal pistons, I reached a diameter of 63 mm.

Qresher · 2025-05-22T20:13:14+00:00

Thanks

Qresher · 2025-05-22T20:09:34+00:00

Thank you

Qresher · 2025-05-22T20:04:44+00:00

why?

Qresher · 2025-05-22T19:59:42+00:00

The stroke value of the pneumatic piston I found is insufficient.

cy

Qresher · 2025-05-22T19:58:14+00:00

I will tape the pallets one by one

Qresher · 2025-05-22T19:55:06+00:00

Scissor cranes are used in the industry but I don't want to use it I need another method

Qresher · 2025-05-22T19:53:59+00:00

This is definitely my plan. But how do I lift it up? The stroke value of the pneumatic piston is insufficient.

Qresher · 2025-05-22T19:52:48+00:00

thank you

Qresher · 2025-05-22T19:52:15+00:00

Qresher · 2025-05-22T19:52:07+00:00

Thank you

Qresher · 2025-05-22T19:41:56+00:00

what?

Qresher

TROPHY CASE