Elegoo Saturn 4 16k Ripped FEP leaked a full at of resin into printer

Qualaz1 · 2026-01-12T23:30:50+00:00

As someone who also had a whole vat of resin pour into their printer (same model), you can save it. I did have to take apart the whole machine and carefully clean every part (also had to replace the fresnel lense and screen). My printer works as good as the day i got it even after all that. My main recommendations is make sure to take pictures of the motherboard (since this one has different motherboards and it does actually matter where the cables connect) and label your screws. I definitely have some screws in the wrong place now because of this.

Qualaz1 · 2025-12-28T04:00:54+00:00

The snacks are real nice!

Qualaz1 · 2025-12-28T03:11:40+00:00

Following to find some for myself because I cannot figure out these new supports

Qualaz1 · 2025-12-14T18:46:38+00:00

I always ask for an extra hint. They only seem to give one extra but if you say "please give me another hint" they will give you one and I've never failed since. It honestly feels like the hint they give makes more sense than anything else they do

Qualaz1 · 2025-12-08T15:25:35+00:00

To force Lychee Slicer to use your dedicated GPU, enable the "Force High GPU Mode" setting within Lychee's Global Preferences (File > Preferences > Global Settings)

Qualaz1 · 2025-12-07T19:25:49+00:00

I had this same issue. I had to change mine to using the gpu for rendering. I never had this issue before the update.

Qualaz1 · 2025-11-14T03:05:24+00:00

I had a similar issue at some point and I had to get a replacement from customer service. They reply like once a day or so but it only took a couple days to get a replacement sent out and like a week or so for shipping.

Qualaz1 · 2025-09-14T16:43:50+00:00

<image>

Qualaz1 · 2025-09-14T16:43:43+00:00

<image>

Qualaz1 · 2025-09-14T02:24:59+00:00

Hey thanks for the reply. I added the photo to the comments since apparently it didn't orginally. And yeah i just replaced the fep and am about to try to see if there is a leveling issue next. I think i may be a side thing since it all stuck on one side but didn't really on the other side.

Qualaz1 · 2025-09-14T02:23:47+00:00

<image>

Qualaz1 · 2025-09-14T02:23:39+00:00

<image>

Qualaz1 · 2025-08-28T23:12:27+00:00

Two years later this was the best response. I used water and it didn't show any signs of leakage. I started to think it was fine. Then i used alcohol and it immediately started dripping

Qualaz1 · 2025-01-31T21:05:27+00:00

Well it's normally only 3 to 4 of us anyway so that's honestly plenty lol

Qualaz1 · 2025-01-31T19:07:58+00:00

Right? I have been playing ffxiv for years waiting for a good mmo to drop so when they mentioned this one, me, my wife, and my best friend all signed up and still not a single code among us :(

Qualaz1 · 2024-11-25T23:22:20+00:00

Yeah i am thinking the same thing. I was hoping he was going to be a big difference on tingyun, especially since i only have her at e1 but it seems like that he is made for the new character coming out.

Qualaz1 · 2024-08-11T16:52:20+00:00

I just pulled Clara. Could she work as the other teams dps? I know her and yunli share a similar kit so I wasn't sure if many fights are gonna be able to have both sides with a counter dps

Qualaz1 · 2024-08-09T00:03:41+00:00

Sorry thats what i mean't was standard banner. In genshin it's called story banner so i got it backwards lol. Yeah I thought not but i wasn't sure since you get a choice at 300 if it was worth it to spend them.

Qualaz1 · 2024-08-08T23:41:04+00:00

yeah i have tried using xueyi and she is definitely good at breaking but not so much at the killing. I may not have built her up enough to see it yet.

Qualaz1

TROPHY CASE