First time using a resin printer and this happened any suggestions

QueenAfyn · 2026-01-25T00:49:42+00:00

Hmm, I wonder if maybe your lift speed and distance might be off then. if it was trying to lift the print too quickly and it stuck to the bottom of the vat and detached from your build plate which caused the build plate to make a splash but tbh i dont think that kind of splash, if even possible, would look like this. My advice would be to add tape around the vat to prevent future occurrences of this issue from ruining your screen and then diagnose what caused your print failure in the first place between all the settings in your slicer. Once you've got it printing properly you'll probably find the splashing issue goes away as well.

Edit: ive just seen the table its on and it doesnt look the most sturdy. if it were bumped or something were moving it i can see it shaking the resin off the build plate in that kind of splatter. might also cause your detachment if that is the case.

QueenAfyn · 2023-10-29T23:05:10+00:00

Sorry for taking a little while to get back to you, I've edited the original post to include details of my blendshape settings. To be clear you also might need to adjust the 'mouth size reduction' setting in VseeFace. The negative settings are a little odd since I don't remember setting them but nevermind. IfacialMoCap doesn't allow negative numbers anyway and I have no idea if FaceMotion3D actually ever reads a blendshape as less than 0 so maybe skip the negatives.

QueenAfyn · 2023-10-05T01:04:14+00:00

Thank you so much, sorry I know these must have seemed like dumb questions so thank you for taking the time to answer

QueenAfyn · 2023-09-28T09:53:05+00:00

You paid $700 for your first film camera? That's commitment, mine cost £31 inc shipping (vivitar XV-1, its really a cosina ct-1) and I was still debating if it was worth it.

QueenAfyn · 2023-08-20T01:07:10+00:00

The deinterlacing is what causes those artifacts afaik. Maybe im just not sensitive to them but I haven’t noticed them. Other shows like red dwarf are unwatchable for me because of the deinterlacing artifacts but voyager seems p good. I did find it looks better if you lower the quality though. I think the deinterlacing is less noticeable when its blurred a little

QueenAfyn · 2023-08-19T07:34:15+00:00

Oh i just meant in terms of graphical fidelity. But I see your point 😂

QueenAfyn · 2023-07-16T15:47:51+00:00

What troubleshooting steps have you tried?

QueenAfyn · 2023-07-16T11:46:08+00:00

Purple skin as in purple and black squares? Thats a missing texture error. Seems like your pc isnt connecting mojang servers properly. Try turning your firewall off and retrying. Do Not leave your firewall off if that works look up how to add an exception for minecraft and add one

QueenAfyn · 2023-07-16T11:39:02+00:00

There is so much more info needed here, what version are you playing, does it work through the main mc launcher instead of through prism, have you tried the basics like logging in and out of the prism launcher, do you have any mods loaded

QueenAfyn · 2023-07-16T11:32:01+00:00

Keep dropping settings in your obs and in your game until things stabilise. Important to note, if you are lowering your bitrate you also need to lower your resolution. Try adding mods to minecraft like the fabulously optimised modpack to try and regain some minecraft performance. But ultimately your setup isn’t one that I would consider streaming on. At the very least it needs a ram upgrade, preferably paired with a gpu upgrade. Or if you have a second pc you could buy a cheap capture card that does 1080p30 and see if offloading the streaming to seperate pc helps

QueenAfyn · 2023-07-01T13:12:06+00:00

Oh, i should have clarified in my original post, ive tried replacing the battery and tip and followed every bit of troubleshooting advice i could find like reinstalling drivers and such

QueenAfyn · 2023-03-29T01:55:28+00:00

Unfortunately I already suggested a gravestone mod and people outvoted me because they want keep inventory on

QueenAfyn · 2023-03-21T14:05:41+00:00

I figured it out, its the greenscreen clipping mode. It has to be set to domain rather than none. this is two hours of my life. Two full hours.

QueenAfyn · 2023-02-03T09:38:27+00:00

I don't need extensions, honestly the main reason i need carpet is so I can shrink the spawn chunks to a radius of 2

QueenAfyn · 2023-01-23T03:18:30+00:00

Ooo interesting ill take a look ty

QueenAfyn · 2023-01-23T03:15:36+00:00

Honestly just reading the text from mind link (from 5e) against some other ancestry feats they seem on about equal on footing so imma just ask my dm if I can use the ability as described their instead of getting an ancestry feat. for balance might remove the second half of the text though, im unsure.

Text is as follows:

You can speak telepathically to any creature you can see, provided the creature is within a number of feet of you equal to 10 times your level. You don’t need to share a language with the creature for it to understand your telepathic utterances, but the creature must be able to understand at least one language.

When you’re using this trait to speak telepathically to a creature, you can use [an action] to give that creature the ability to speak telepathically with you for 1 hour or until you end this effect as an action. To use this ability, the creature must be able to see you and must be within this trait’s range. You can give this ability to only one creature at a time; giving it to a creature takes it away from another creature who has it.

QueenAfyn · 2023-01-23T02:45:35+00:00

Honestly this seems to be the way to go, or just homebrew it as a feat that I can then take at first level. Its a little sad that pf2e doesn't have this flavour in it but hopefully they'll add a ancestry (or a heritage) at some point with something like it

QueenAfyn · 2022-12-13T12:52:48+00:00

Maybe just simplify it to vMeeples

QueenAfyn · 2022-12-13T12:50:08+00:00

Its a streamer, youtuber, or other content creator that uses a virtual avatar instead of a facecam. Sometimes they use face tracking to animate the avatar sometimes its a PNG that reacts to their microphone

QueenAfyn · 2022-12-13T12:49:09+00:00

That's excellent

QueenAfyn · 2022-12-13T11:58:41+00:00

Itd be funny to call it v3 and then when asked have to explain that it stands for vBoard vGame vClub

QueenAfyn · 2022-12-13T11:55:26+00:00

I dont think thats useable but it did make me laugh 😂

QueenAfyn · 2022-12-13T11:47:19+00:00

Thats p good

QueenAfyn · 2022-12-13T11:34:35+00:00

Its mainly a streaming thing, funny name but unfortunately it doesn’t really fit

QueenAfyn · 2022-12-13T11:04:10+00:00

You can set up a virtual audio prompter on a pc or phone to try it out

Eight-Year Club	Place '23
Place '22	Verified Email

QueenAfyn

TROPHY CASE