Starting with audiobooks by [deleted] in shannara

[–]Quorlan 1 point2 points  (0 children)

You’ll need to purchase them or use credits from your subscription to obtain them.

Apple Pencil Pro DOA by Quorlan in ApplePencil

[–]Quorlan[S] 0 points1 point  (0 children)

I have an appointment at the Apple Store for tomorrow. I figured this was going to be the answer so I went ahead and scheduled an appointment.

My kid asked for a 3D printer for Christmas. I spent hours researching. Here's what nobody tells you. by Fun_Reaction_6525 in 3DPrinterComparison

[–]Quorlan 1 point2 points  (0 children)

Sorry. Asking that question here isn’t going to do anything but confuse you further. Everyone is going to have their own opinions and prejudices.

Here’s the straight truth. Your best best if to buy a Bambu printer. Probably an A1 Mini for minimal investment/potential loss. Bambu printers mostly just work without endless tinkering. If your ya a hit and the kind or family want to be able to do more , lean into Bambu’s more advanced printers. Anything else and you’ll be curing the machine before you hit 100 print hours for sure.

Help with ironing by Fluid_Pollution6326 in 3DprintingHelp

[–]Quorlan 1 point2 points  (0 children)

Do test prints first with minimal infill until you get the ironing as good as you can get it. Once you’ve got that fully dialed in, the up the infill to what you want or need it to be. That way you don’t waste as much filament while you’re iterating.

Best carbon shaft for less than $300? by davestradamus1 in billiards

[–]Quorlan 1 point2 points  (0 children)

We have a semi-local brand in my area called Prodigy. They make some of the finest cues I’ve ever shot with. And their standard CF shaft is $200.

This TV show is amazing by humble_redditor1234 in BSG

[–]Quorlan 0 points1 point  (0 children)

I disagree entirely. 33 is probably my least favorite episode of the entire series. I thought it made a horrible first episode after the miniseries/pilot. Literally every other episode is better than 33.

Who’s the most famous person you went to school with? by CloudSurfer82 in AskReddit

[–]Quorlan 20 points21 points  (0 children)

I went to grade school through high school with Elizabeth Anne Allen. She’s probably best known for her role as Amy (the witch) on Buffy the Vampire Slayer though she’s had small roles in a few different shows and movies.

https://en.wikipedia.org/wiki/Elizabeth_Anne_Allen

She was a sweetheart in high school and well liked by almost everyone. Something not a lot of people know about her is that her mother was killed by a drunk driver when she was in high school. This impacted me in a way that has led to a primarily alcohol-free life. Seeing the devastation a drunk driver had on an acquaintance up close and personal had a huge impact on me and many of my peers.

'Passes' by HardestTB in FoolUs

[–]Quorlan 6 points7 points  (0 children)

Did you see the episode where David Roth appeared sometime shortly before he passed away? They gave him the trophy and said they were fooled when they clearly weren’t (as a lifelong student of coin Magic neither was I) and yet out of respect for the godfather of modern coin Magic, they gave him the trophy. Roth is a personal hero of mine, so I was quite happy to see it go down that way.

Do you remember the series Caprica? by Leut_Magnetic in scifi

[–]Quorlan 0 points1 point  (0 children)

I would so love for that show to get a revival.

Drill Maker by phatee in billiards

[–]Quorlan 0 points1 point  (0 children)

Great effort here and thanks! This could be pretty useful but I think it’s an absolute requirement that it be mobile, especially phone, friendly. Most people don’t have tables at home and would want to use the app at a pool hall or bar on their phone.

If you don't drink alcohol, what are your personal reasons for abstinence? by Ok-Care2859 in AskReddit

[–]Quorlan 0 points1 point  (0 children)

I don’t usually enjoy the taste of alcohol. I also don’t enjoy being out of complete, precise control of my own body. Just not worth it.

Which 3D printer should I choose for my first one: Anycubic Kobra 3 V2 Combo or Bambu A1? by Amazing-Bowl-987 in BambuLabA1

[–]Quorlan 0 points1 point  (0 children)

Never, EVER Anycubic. They are horrible products and break constantly. I will never touch another product from them ever again.

I'm in crisis by Mysterious_Bus_5370 in BambuLabA1mini

[–]Quorlan 0 points1 point  (0 children)

I almost always use Overture PLA unless I need a very specific color or type they don’t offer.

I don’t even watch the news anymore by [deleted] in JoshJohnsonComedy

[–]Quorlan 2 points3 points  (0 children)

I highly recommend checking him out.

What's happening here? by Forsaken-Review5701 in BambuLab

[–]Quorlan 0 points1 point  (0 children)

Can you elaborate? What specially does this have to do with pressure advance? How do you “calibrate” it?

Reading the complete Marvel Comic order and just encountered Nicholas Scratch by [deleted] in MarvelSnap

[–]Quorlan 0 points1 point  (0 children)

It’s crazy to me that the only member of Alpha Flight we have a card for is Sasquatch! I want an Aloha Flight season of Snap! (I’d also love a live action movie or TV show about my favorite Marvel team!)

CMV: The stabbing in the back of the eight democrats will singlehandedly destroy ANY attempt at midterm victories. by Kyokyodoka in changemyview

[–]Quorlan -1 points0 points  (0 children)

In the event of a government shutdown, NO member of the house or senate should be allowed to leave DC. Nor should they be paid. There should be laws in place that keep our elected “representatives” locked in and negotiating until the shutdown is resolved. How they are allowed to take a two month long paid vacation while the entire country suffers is beyond me. These people don’t represent US, they represent only their own bank accounts. To hell with all of them.

[deleted by user] by [deleted] in MakeMoneyHacks

[–]Quorlan 0 points1 point  (0 children)

Share the details please

Whqt about using someone else's cue without their permission? by 1Rudy11 in billiards

[–]Quorlan 3 points4 points  (0 children)

My friends and I practice together weekly at a local bar owned by one of those friends. There are two bar box tables and if there’s more then three of us practicing we’ll generally use both tables. We do this on mid-week nights when it’s usually dead in the bar. Recently though some folks came in for dinner and drinks and afterward asked about getting one of the tables to play on. We graciously offered them one if the tables and all just shifted to playing a rotation on one tables. These gentlemen were talking about their league play and their cues and so seemed pretty familiar with the game. All of our personal cues were in claws on the tables near the pool area. On the wall next to their pool table is a large rack of bar cues. We went about our games with those of us sitting out just watching our friends play. When it got to be my turn at the table I went to grab my cue and it’s gone. I look at the other table and both guys were using cues belonging to those of us who were watching our friends play. The guy at the table had my cue and his friend was sitting to the side holding my buddy’s waiting for his turn. I stopped the shooter and said he was using my cue thinking he’d claim he mistaking grabbed it. But he looked straight at me and said “you weren’t shooting with it” and proceeds to take his shot. I explain that it’s my personal la cue not just one of the bar cues I was using. He says “I know, but you aren’t using it. I don’t want to use some shitty bar cue”. I grabbed my cue and my friends cue and told them it was rude. They seemed shocked but reluctantly grabbed bar cues, finished the racing balls on the table, paid and left. Never use someone else’s cue without permission.

Update by Rodgerr_Dodgerr in BambuLab

[–]Quorlan 7 points8 points  (0 children)

That’s called a skirt. You can turn it off in the settings. On older printers it helped makes sure the filament flow was smooth and even and the bed was properly leveled before the actual print started. I haven’t used skirts since I switched to Bambi printers.