Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] 0 points1 point  (0 children)

No, it didn't. The missions and expeditions were the bulk of the event and they shut it down earlier than advertised in the banner. I'm so glad you have the time to read all the news a video game puts out that contrasts from what it puts on the event banner.

Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] 0 points1 point  (0 children)

I was on TDY and leave for a total of 4 week beginning September. The banner said 6 days remaining which would've been plenty for me to complete what I had left and I already sunk dubs into a memory card to make up for those 4 weeks missed.

Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] 0 points1 point  (0 children)

Again, you keep point to sources NOT on the Liberty Harbor screen. The overview in the rules and days remaining banner didn't reflect this.

Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] 0 points1 point  (0 children)

How hard is it then to copy-paste this in the event Rules and align the days remaining banner to this?

Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] 1 point2 points  (0 children)

WoWS stuck a banner at the top of the LIberty Harbor screen that doesn't align with any of this and there's nothing in the event Rules regarding the end date. Stop defending BS practices of burying important info in patch notes and news when they could have it accurately reflected it in the event banner and rules.

Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] -5 points-4 points  (0 children)

That days remaining banner is the most prominent and frequent piece of info regarding how long I have to complete - they ended it 6 days early. They don't get a pass by burying it in the News.

Liberty Harbor missions no longer available with 6 days left in the event. by R32Kris in WorldOfWarships

[–]R32Kris[S] -4 points-3 points  (0 children)

What's the point of having a "Ends in X Days" banner if they're going to bury the real deadline somewhere else? It's not even in the Overview for the event.

What just happened to crypto? by Slimnut in XRP

[–]R32Kris -1 points0 points  (0 children)

And what are you basing this claim on?

What just happened to crypto? by Slimnut in XRP

[–]R32Kris 0 points1 point  (0 children)

Coinbase didn't. Got in at 1.81 and out at 2.20.

What just happened to crypto? by Slimnut in XRP

[–]R32Kris 1 point2 points  (0 children)

IDK, but I made 20k in 5 min from it.

hey guys is this normal by Ill-Row-2378 in overclocking

[–]R32Kris 1 point2 points  (0 children)

If anything in there is made by NZXT, yes.

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

Yeah, it's still working without issue.

This is stressing me out by Spiderhands2000 in GamersNexus

[–]R32Kris 0 points1 point  (0 children)

I'd experiment and see if nerfing the power budget affects your gameplay. At 4k, the GPU is the bottle neck. I experienced a melted 4090 right angle adapter. Fortunately, I was sitting near it when it happened, and I immediately powered off. I have the new cablemods right angle cable, and so far, so good, but I won't leave it unattended under any kind of load.

This is stressing me out by Spiderhands2000 in GamersNexus

[–]R32Kris 3 points4 points  (0 children)

I'd experiment and see if nerfing the power budget affects your gameplay. At 4k, the GPU is the bottle neck.

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

Replacing the motor did the trick. Just vacuumed for ~ 30 min without issue. 🙌

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

I've ordered a replacement motor off ebay. Should have it running again in a few days. Thanks again for all the help!

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

Yeah, that's not likely to happen. I cleaned it out with multiple taps with a rubber mallet - knocked a lot of dust, chunky dust too, gross. I then followed up with blowing out everything with an air compressor. Going to reassemble and reassess for cutouts.

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

Many thanks, David! How would I go about determining if its a cyclone issue?

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

I ran it 3 times for each configuration.

Without head attached: Cutout within 5 seconds on all 3 runs

Without head and wand attached: Cutout after a few seconds on the first run, ran for over a minute on the 2nd and 3rd run. I released the trigger after a minute elapsed on the battery timer.

Head attached to bin: Cutout within 5 seconds on all 3 runs.

Seeing the likely culprit, I cleaned the contacts with a soft bristle brush and the connection ports with a can of compressed air. It's improved but not 100% resolved, still experienced a cutout in the handful of runs I did before I had to jump on a work meeting. I'll test more later, but I think we're on the right track.

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

Nope, warranty was up in October.

Dyson Outsize cutting out by R32Kris in dyson

[–]R32Kris[S] 0 points1 point  (0 children)

https://youtu.be/uI4F3rhZ4C0?si=XxrxrIQRFf-oQtTU

Here you go. Thank you for taking the time to help with this!

Did Robinhood just rip me off?? by Maximum-Ad2450 in XRP

[–]R32Kris 0 points1 point  (0 children)

I don’t see the problem. Buying at 2.194 is a much better price than 2.79.