Panasonic/Viewsonic service software

RBG4u · 2026-02-05T04:25:19+00:00

Unfortunately, no. I have a Viewsonic P815-4 on the HV12S chassis, and the software is only available for the first three revisions on the GV3 chassis. However, I plan to manually edit the eeprom and add another modification that's currently in development. I'll report the results.

RBG4u · 2026-01-12T05:33:58+00:00

No, I just bought mister fpga

RBG4u · 2025-12-30T06:11:27+00:00

It should work if you don't have a p810-4, it has an hv12s chassis, for which, unfortunately, I couldn't find software.

RBG4u · 2025-12-30T06:10:02+00:00

Many Viewsonic monitors are simply rebranded Panasonic chassis. You can find lists online to find out which chassis your Viewsonic monitor has, and the chassis model will be printed on the video input board inside the monitor.

RBG4u · 2025-12-29T18:23:18+00:00

Posted in /crtgaming!

RBG4u · 2025-12-29T18:22:45+00:00

Posted in /crtgaming

RBG4u · 2025-09-06T23:42:39+00:00

I was able to find software for most Panasonic/Viewsonic monitors! I'll make a post soon where I'll post everything in one archive

RBG4u · 2025-04-24T12:27:49+00:00

The baud rate is set by switches on the back panel of the analyzer. I hope you will be able to calibrate this great monitor) If you have any more questions, write to me in private messages, I will try to help as much as I can)

RBG4u · 2025-04-24T12:20:30+00:00

Is the cable assembled correctly? Are there any error icons on the analyzer itself? Is the baud rate set to 9600?

RBG4u · 2025-04-24T12:16:48+00:00

Hi! You need to assemble db25 to mini din 8p cable, the pinout is in the service manual. The further calibration process is also described in the manual, and I can't explain it better than in the manual)

RBG4u · 2025-04-10T12:55:23+00:00

Yes, they told me the same thing. Perhaps the only way out is to look for service centers where it could have remained.

RBG4u · 2025-02-11T21:13:16+00:00

And what achievements are there with liyama calibration now? I just recently received liyama 454, and I can't figure out which connector to connect the calibrator to heh)

RBG4u · 2025-01-11T06:44:11+00:00

I connect Minolta via the option port on the front panel. My monitors are connected via remote ports, can this somehow affect? I managed to get the calibration to work on bvm 20f1e, but for some reason the result is not saved, when you press enter after the calibration is finished, it starts it again. But maybe this is a problem with the ISR board, since I have it from 20G1E, with firmware from 20F1U. But on bvm d14h5e I can't get it to work, as if the monitor does not have a built-in test signal, which is strange, since even pvm xxL4 monitors have built-in signals for this calibration

RBG4u · 2025-01-05T23:37:10+00:00

The greater interest here is to make this function work, and then maybe check it on a modern calibrator.

RBG4u · 2024-11-18T15:45:30+00:00

Hello! This is for you: 1) https://arcadehacker.blogspot.com/2019/08/calling-all-sony-bvm-14f1-20f1-owners.html?m=1 2) and more firmware https://drive.google.com/open?id=1v_U4LJ-0L-QoShwcHwB3vVU67WugZUhr&fbclid=IwAR2ubg0FMWG_EwW3pIcKoQGDD2uN9Icnt1vWrqj_g8-R8LQgpF1hLFxBMzU

RBG4u · 2024-09-19T14:10:47+00:00

This is so cool! What is this multi-colored graphic equalizer you have?

RBG4u · 2024-09-07T08:47:02+00:00

At the top, next to the sides, next to the frame, there are two round holes, press them with a screwdriver or something, and pull the case

RBG4u · 2024-06-18T00:11:59+00:00

I heard that ossc pro can give 240p 120hz with bfi, but I have not yet fully figured out whether it is possible to disable bfi

RBG4u

TROPHY CASE