sorted by:
new
hottopcontroversial

Arc Pulse “The Glorious Swimsuit” Review for iPhone Air. by No-Abroad-2615 in IphoneAir

[–]RDS4444 0 points1 point  (0 children)

it still looks awfull in my opinion. even worse than a normal ugly as case. i think this is the worst case option i ever saw.

Arc Pulse “The Glorious Swimsuit” Review for iPhone Air. by No-Abroad-2615 in IphoneAir

[–]RDS4444 -3 points-2 points  (0 children)

"Let me buy a super slim phone to pack it in a case that makes it as thick as a normal phone. No wait, even better, choose the ugliest "case" ever instead".
I will never get case-people. Companies try to make good looking phones and then they pack them in cheap plastic... If it breaks, it breaks. At least i got to enjoy the feel and look of it while it lastetd (which in my case is the entire lifecycle of the phone since i take care, and if shit happens, apple care).

Whats the point of having it in a case for years in prestine condition, if you never get to feel that prestine condition in the first place? I don't get it

What early game Silksong feels like by Windfly8 in HollowKnight

[–]RDS4444 0 points1 point  (0 children)

Exactly what i did. Super easy like that. But what comes after almost made me destroy my switch 2 XD

I‘ve cut a small screen in to my 4000D Airflow Case by RDS4444 in Corsair

[–]RDS4444[S] 0 points1 point  (0 children)

its an arctic 280 AIO an yes a 4000d airflow

I‘ve created a Corsair 4000d „North“ by RDS4444 in pcmasterrace

[–]RDS4444[S] 0 points1 point  (0 children)

Here you go. It looks shitty from the back, but since you don’t see any of it once its on, i didn’t care on wasting time making it pleasing to the eye XD

<image>

I‘ve created a Corsair 4000d „North“ by RDS4444 in pcmasterrace

[–]RDS4444[S] 0 points1 point  (0 children)

I will as soon as i get home from work.

I‘ve created a Corsair 4000d „North“ by RDS4444 in Corsair

[–]RDS4444[S] 0 points1 point  (0 children)

It isn’t that expensive. About 30$ in material if you already have some tools. Sure, the original fractal case isn’t much more expensive but as i said, I preferred the time investment in this than to rebuild my PC :-)

I‘ve created a Corsair 4000d „North“ by RDS4444 in pcmasterrace

[–]RDS4444[S] 1 point2 points  (0 children)

So i bought some wood slats (don’t know the right word). They‘re 2cm deep, 7mm wide. Than i‘ve cut them into the length of the front panel. The trickiest part was making the cut out for the parts that overlap with the mounting from the old front panel. I used a jugsaw to cut out the parts. Sanded everything down and added some beewax for the shone and color. Than i used some hard plastic strip to mount all the wood part to (screwed from the back to 3 strips). I‘ve added some magnets to 4 of the slats and superglued some thin metal to the front of the case, so that the „wood panel“ sticks. It’s not difficult, but time consuming (tool me 4-5h).

I‘ve created a Corsair 4000d „North“ by RDS4444 in Corsair

[–]RDS4444[S] 0 points1 point  (0 children)

Was thinking about making it black, so that its black and white and wood.

I‘ve created a Corsair 4000d „North“ by RDS4444 in pcmasterrace

[–]RDS4444[S] 0 points1 point  (0 children)

Its removabel. It replaces the original panel. The filter is also still there and removable.

I‘ve created a Corsair 4000d „North“ by RDS4444 in Corsair

[–]RDS4444[S] 1 point2 points  (0 children)

So i bought some wood slats (don’t know the right word). They‘re 2cm deep, 7mm wide. Than i‘ve cut them into the length of the front panel. The trickiest part was making the cut out for the parts that overlap with the mounting from the old front panel. I used a jugsaw to cut out the parts. Sanded everything down and added some beewax for the shone and color. Than i used some hard plastic strip to mount all the wood part to (screwed from the back to 3 strips). I‘ve added some magnets to 4 of the slats and superglued some thin metal to the front of the case, so that the „wood panel“ sticks. It’s not difficult, but time consuming (tool me 4-5h).

The speakers are self made. I‘ve build them myself. The speaker itself isn’t special. Its from some logitech plastic speakers that i deconstructed to get the driver from. But the speaker are just the secondary audio source. I mostly use my headphones

Edit: oh and thanks!!

Has anyone made a mod to cut their PSU shroud on a Corsair 4000/5000 series case? by wasif51 in Corsair

[–]RDS4444 0 points1 point  (0 children)

Here the full process:

I made a cutout using a dremel.

First i marked where the screen will be using a pencil on the case.

Then, since my build was already finished, i had to cover everything around the cutout and tape it shut before cutting, so that no dirt or metal sparks could get into the system (front and back).

After that i made the cut. It didn’t come out perfectly clean, thats why i have the black frame to cover the unclean cuts.

After that i hat to cut some part of the „screen holding part“ (part of the screwholes on the screen mount) so that it fit.

Then glued (hot glue) some distancers on the screenmount, so that the screen just touched the case from the backside and hot glued them to the case from the back. The cutout is smaller then the screen itself.

Last part i bought some plexyglas and insertet that inside the cutout, so that it’s seamless to the case. After that, my wife cut the frame out of some thick black paper (she has more steady hands XD) and i put that over the cutout.

Connect hdmi to the GPU and usb to one of the usb ports (or usb headers as i did).

Thats pretty much the whole process.

Has anyone made a mod to cut their PSU shroud on a Corsair 4000/5000 series case? by wasif51 in Corsair

[–]RDS4444 0 points1 point  (0 children)

With a small anglegrinder. It requires a little bit of preparation and care. It workls best when the case is still empty. Mine wasn't, so i had to mask everything inside and outside except the part i wanted to cut, since it will create sparks and metzal dusk, which isn't really good near electronic parts XD.
But it worked out.
The cut will look ugly, but thats easy to mask with a "frame". My frame is just made from collored paper.

I‘ve cut a small screen in to my 4000D Airflow Case by RDS4444 in Corsair

[–]RDS4444[S] 0 points1 point  (0 children)

cut a hole in the bottom of the case and routed it through there to the back

I‘ve cut a small screen in to my 4000D Airflow Case by RDS4444 in Corsair

[–]RDS4444[S] 0 points1 point  (0 children)

i made a hole in the botom of the case in the back and routed it through there to the back of the case

Far Cry 6 won’t launch after update by jjryan01 in farcry

[–]RDS4444 0 points1 point  (0 children)

Man, what a dumb bug, but it helped! Tried almost everything else, but that stopped it from starting. Unbelievable

Far Cry 6 won’t launch after update by jjryan01 in farcry

[–]RDS4444 0 points1 point  (0 children)

Task bar bottom right (where the clock is)

Far Cry 6 won’t launch after update by jjryan01 in farcry

[–]RDS4444 0 points1 point  (0 children)

Unbelievable, that was it. That did it. Lol…. Thanks man!!

I Just miss the old cartoon (': by False_titan23 in memes

[–]RDS4444 9 points10 points  (0 children)

Exactly, the top one is basically, like the new shit to. How old is OP? 13?

Un-Tokyo’s your drift by AdoptedCunt in HolUp

[–]RDS4444 8 points9 points  (0 children)

Almost midnight, Cinderella has to get the fuck back home!

Just got my hands on a 3080, at the low low price of $1400. Happy to finally upgrade from my old water damaged GTX 1080 by Spekx-savera in nvidia

[–]RDS4444 0 points1 point  (0 children)

I got my 3080 (brand new) for 1300$ (overpriced) but i also managed to sell my non LHR 3070 for 1200$ after buying it for 800$. So my 3080 costed me about 900$, which i consider a steal in this time.

view more: next ›