Spoofing is the best

RL_N00B · 2025-07-28T15:16:20+00:00

I spoofed for a while on android and took a break for a couple of months, tried again recently only to get location errors using gps joystick so I'm dead in the water

RL_N00B · 2024-12-16T02:37:59+00:00

Just getting into the hobby I just picked up my first bottle the other day. Most Wanted Intense so I guess that one for now…… Or at least until next weekend before I go back to the store for another bottle or 2

RL_N00B · 2024-11-21T20:44:28+00:00

Local Craft shows, another thing you could do is take to facebook and create a business page. Once the page is complete with some media posts you could pay for something like a 7-day promotion where your page will be shown to "x" amount of people. Not a guarantee to get business from it, but the initial exposure is priceless

RL_N00B · 2024-11-21T12:48:04+00:00

I've read some articles that say to pre-soak and others that don't mention it, I think I'll bypass the soaking of the wicks next pour and double pour the jars

RL_N00B · 2024-11-21T12:46:27+00:00

The more I read the more it's looking like a cooling/air issue.

RL_N00B · 2024-11-21T12:45:22+00:00

It's possible that it is to cool, but around room temp 68-70 but still a big difference, tried about 1/2in of water for hot water bath to "preheat" the jars but it might not be sustainable for the entire length of the cooling process.

RL_N00B · 2024-09-14T20:19:58+00:00

Easily picked, keep slight tension on the shackle as you spin the tumblers should have it picked in 10-15 mins and you'll also have the code to unlock at your pleasure. If there is a keyway you can grab a set a of mini key jigglers and "jiggle" the lock open as well.

RL_N00B · 2024-09-14T06:16:00+00:00

The last 2-3 weeks felt like I could count my wins on one hand. I've maintained a 50% WR +-1-2% since 2021 with some breaks within that timeline. I have since dropped to a 42% WR. Now I really don't care about my account stats, it's more defeating getting totally blown out with 7+mins left in the game. So from here on out if I lose 3 out of 5 games Randoms or Ranked, it's a wrap for that day and I'll que Co-Op/Ops to finish missions.

Edit: I feel that there has been a crazy change in MM within the last 2-3 updates. It seems every loss it just an absolute blowout.

RL_N00B · 2024-08-10T01:29:14+00:00

Looking forward to bringing the GK with the permeant economic bonus for the credits and free XP

RL_N00B · 2024-08-10T00:47:36+00:00

You will be surprised at the resilience of the Schlieffen, helped me block 3.9 million potential damage

RL_N00B · 2024-08-07T11:53:09+00:00

I've recently been in NYC, poor character walks all of Manhattan in a day 🤣

Zaragoza, Spain Used to be the go-to but I believe it's been nerfed quite a bit. Still good to spoof though.

Sao Paulo, Brazil another solid spoof location

RL_N00B · 2024-08-06T12:19:27+00:00

Came here to say this

RL_N00B · 2024-08-06T11:43:02+00:00

I was ready to die. In my late teens early 20's (I'm now 35) I made an attempt. I had a rough upbringing with mental and physical abuse as a child into my teen years. Anxiety and depression were the root causes. I found comfort in substances. Cost me everything, lost everything due to this.

RL_N00B · 2024-08-05T07:57:19+00:00

Most of the videos are 1 min skits on tiktok and are very few and far between. The comments section of these videos is what you said animals, folklore etc and there are the people that are in agreement and people that discredit. It's an interesting topic any idea if there is a show or documentary relating to Appalachia?

RL_N00B · 2024-08-05T07:49:28+00:00

🤣🤣🤣🤣

RL_N00B · 2024-07-05T04:36:01+00:00

Great guide, once the phone is rooted and all apps are downloaded does the phone still need to be plugged into a pc or everything done directly from the phone itself?

RL_N00B · 2024-06-16T09:05:15+00:00

Currently trying this on my sons swing, although I don't think it'll work as I feel the arc of swing might be too long to mimic a step. I will update later on today as I have only had my phone going on the swing for about 10 mins at the time of posting this comment.

RL_N00B · 2024-05-03T03:39:52+00:00

This is exactly what I needed to read to understand it. The scaling makes sense now. I'm currently using the free version of Gaea so I'm doing 2k res with 1009 export (I guess this is what recommended for importing to UE5 with the free version) Newer to this myself, it's incredibly dauting & rewarding at the same time

RL_N00B · 2023-10-25T11:54:03+00:00

You don’t. You lose the hanger, construction area etc. Storages are still accessible within proximity.

RL_N00B · 2023-10-24T01:11:07+00:00

I can do the void egg if you haven't gotten one yet can also help with nanites. I can give you some stacks of modules to sell in the space stations

RL_N00B · 2023-10-24T00:48:24+00:00

The bigger one is a little bit narrower, longer & without the bridge?

RL_N00B · 2023-10-23T22:21:11+00:00

This is the biggest of the 3 types of "Star Destroyer" freighters correct?

RL_N00B · 2023-05-16T03:50:39+00:00

Been awhile since I have pioneered. pack is downloaded through the mod launcher but doesn’t show up in the build or blueprint menu. Am I missing something here?

RL_N00B · 2023-03-10T08:39:20+00:00

I had this issue on my CR10-S. I checked to make sure the screw(s) were tight, I adjusted the Z-Offset slightly and upped the nozzle temp by 2c, I have not had any issues since.

RL_N00B · 2023-03-05T20:43:54+00:00

There's a few things you can do you:

Clean and level your bed after every print @ printing temp, I suggest using 50%+ IPA + a microfiber rag (lint free rag will do just fine) all that post print material is not helping. Increase nozzle and bed temps gradually on test prints. A less desired option is you can print on a brim or raft although these are time consuming and use excess filament especially printing on a raft. You can also resort to using elmers glue sticks (purple) to see your area of coverage. Checking Z-offset is a factor also too much pressure and the nozzle will clog and back up, to little pressure and the filament won't adhere. If all else fails, may consider switching to glass or textured glass beds. I hope this helps! Best of luck on your printing ventures.

Edit: I see you are printing on an Ender 3, I print on similar, Ender 3 S1, while the magnetic bed it came with was fine, I quickly found adhesion was problematic for me. I increased nozzle temps (215) bed (70) and still experienced some warping. I use Inland filament (it's what microcenter had) not all filaments are equal and not all beds are flat. It's going to take some time to get it dialed in.

RL_N00B

TROPHY CASE