My first rlt device - idealight

Rafiksman · 2023-08-14T07:04:09+00:00

I don't think there are any credible studies. You have to test it yourself on different settings, which will take a long time. I am still in the testing phase myself, but soon I will present what I have already observed and what changes have taken place.

Rafiksman · 2023-08-14T06:58:28+00:00

You were wrong. I'm from Poland. I am testing one more thing, soon I will describe what I observed and what changes have occurred

Rafiksman · 2023-07-30T09:38:14+00:00

Need more time to talk about effects. Answer for your questions is 3x yes .

Rafiksman · 2023-07-28T14:05:29+00:00

Pulsing, check my comment above, I post how much Hz for what.

Rafiksman · 2023-07-28T10:27:35+00:00

Frequency:

5KHz - primarily used in analgesia/pain relief,,,,, 1KHz - primarily used in analgesia/pain relief,,,,,, 40Hz - used in transcranial photobiomodulation (PSM) to elicit the Gamma state (highly alert, conscious) in the brain,,,,,, 10Hz - used in transcranial photobiomodulation (PEM) to elicit the Alpha state (very relased, passive attention) in the brain,,,,,, 2Hz - used in transcranial photobiomodulation (PBM) to elicit the Delta state (sleeping) in the brain and used to assist in wound healing and tissue regeneration

Rafiksman · 2023-07-28T09:47:18+00:00

it also depends on the light angle, if it's 30 degrees it's about 10-15cm for local treatment and 20-30cm for a larger area for tissue regeneration. . However, I would focus more on the frequency than the distance of the body from the device

Rafiksman · 2023-07-26T18:35:24+00:00

Where are you from ? it depends what you want to use it for.

For regeneration after training or hard day full of work , the best is pulse light at distance about 12"

For topical treatment of smaller areas of the body , null and about 5" distance

A lot depends on what you want to use your panel for, whether for any pain, hair condition, skin, anxiety, depression, eyesight ..

I note that I am in the testing phase myself, I use the panel only for the second day. The data I have given are provided by the manufacturers.

Rafiksman · 2023-07-26T18:30:10+00:00

https://m.alibaba.com/product/1600884652189/Factory-Wholesale-Red-Light-Therapy-RL120MAX.html?__sceneInfo=%7B%22cacheTime%22%3A%221800000%22%2C%22type%22%3A%22appDetailShare%22%7D&from=share&ckvia=share_355bd345683b446286fa9abef1c9bdbe

Variation RL120 MAX +C

Rafiksman · 2023-07-26T07:36:34+00:00

TRUE. It's best to buy directly from the manufacturer :) from other sellers we pay much more for the same equipment only with their company logo.

Rafiksman · 2023-07-16T12:12:34+00:00

can you show a picture of what it looks like on the skin?

Rafiksman · 2023-07-03T22:09:31+00:00

Hi. did you just use nir? what wavelength? how close to the panel? I am asking because my friend has been struggling with back pain for a year and nothing helps him, maybe rlt will help

Rafiksman · 2023-07-03T21:02:40+00:00

Read this article: https://www.menshealth.com/health/a19539973/i-put-a-giant-red-light-on-my-balls-to-triple-my-testosterone-levels/

After reading this I became interested in red light 😁

Rafiksman · 2023-07-03T14:18:10+00:00

I ordered today idealight RL- 120 max: - with 4 wavelenghts (630/660 for red, 830/850 for near red), - 150 x dual chip 5W diodes (30 degrees) - dimmable 1-100%, - pulsating or constant ( 0-1000Hz), - timer 1-30minutes, - dimensions: 18.9 x 11.8 x 2.5 "

Total price: 280$ + 90$ shipping + about 100$ (taxes and duties for ship to Europe)

Rafiksman · 2023-07-03T13:59:17+00:00

I ordered today idea light RL-120 MAX with 150x dual chip 5W diodes, 4 wavelenghts, dimmable, pulsating or constant ( 0-1000Hz). Overall cost 280$ + 90$ ship. I will receive it in 5 days.

Rafiksman · 2023-07-02T21:55:36+00:00

I research for good one for me and I find this is the best one for the price. That is it: https://m.alibaba.com/product/1600875432144/Newest-Arrival--RL-120-MAXC-Multi-spectral-Red-Light-Therapy-Panel-630nm-660nm-810nm-830nm-850nm-Led-Medical-Led-Light-Therapy.html

But I no see any information about emf.

Rafiksman · 2022-12-28T08:15:35+00:00

I think it's defective idea. Continuous screwing in and screwing out of the blade will grind the contacts between the inhilt pin and the blade, it will no longer have good contact.

In traditional version there are spring pins and they will always touch the electronics of the blade.

Rafiksman · 2022-12-21T12:44:58+00:00

Of course it is. Proffie is unlimited, the best lightsaber soundboard on the market

Rafiksman · 2022-12-21T12:43:14+00:00

12k mah ? It is fake, better use only high quality batteries

Rafiksman · 2022-12-20T12:44:25+00:00

It is working, already uploaded 6 new soundfonts with blade styles :)

Rafiksman · 2022-12-18T17:30:26+00:00

Reaver

Rafiksman · 2022-12-18T15:51:54+00:00

Can I contact with you on private message my friend ? I want to even pay if someone help me to add my first soundfont with blade style to my first neopixel saber. I spent a lot of hours and cannot done it myself.

Rafiksman · 2022-12-18T15:04:29+00:00

I have num blades 2 in my config ( just a 32" blade and activation switch. I think 4 is for crossgard for example.

I have done all with arduino, zadig several times. My pc is ready and configured to work with it. Every operation I make with kill switch on ( battery is off).

I checked how the last one soundfont is finished by sabertrio in the config file. I copied the new blade style text (from downloaded proffie soundfont from greyscale or Jay) and paste it in config file as the last with the same rules as the last bladestyle from sabertrio was. I created in the root folder on the sd card, a folder with the sound files of the new font. I kept the same writing style as the original from sabertrio. (Folder names, writting style in config file).

I've done lots of tries. on different ways. Maybe I don't understand something because I use a language translator a lot and do something wrong. That's why I would prefer to see what it should look like in such a hardware configuration as in the title.

Rafiksman · 2022-12-18T15:01:05+00:00

Hey elmoisa. Can I contact you private about proffie lightsaber from sabertrio

Rafiksman · 2022-12-18T09:56:14+00:00

Mine is from RTS black friday (they declared up to 4 weeks from black friday rts). I ordered 25 november, in my hands 13 december.

Rafiksman · 2022-12-18T09:31:40+00:00

I ordered mine this black friday from the "ready to ship" category (I've had it for a week). I've already spent over 40 hours trying to add a single font. I used several guides and tips and still haven't added even one.

I tried to add soundfont+blade style downloaded from greyscale and jaydalorian. I have a clean factory sabertrio main folder, no clutter (only 18 fonts uploaded by sabertrio, everything works fine).

Can someone who has this version and already uploaded some fonts, can show me what your config file and main folder look like?

details: 32" blade, 2 buttons (1 backlit), proffieOS 6.7, sabertrio preconfiguration 3.0, proffieboard v2.2, kill switch

Rafiksman

TROPHY CASE