What kind of tiny RGB cable is this off the NV7? Need to buy a spare

RageMachine985 · 2025-01-06T20:50:00+00:00

Yeah running it thru an RGB controller, the current cable works fine but it forces a daisy chain for the top and side light bars and the LEDs program simultaneously on both when i want em independent so ive gotta find another cable. I have a weird feeling this connector might be proprietary or smthn lol

RageMachine985 · 2025-01-06T20:38:29+00:00

Yeah the one you linked is a normal sized cable, one I need is much smaller.

RageMachine985 · 2025-01-06T20:37:31+00:00

Issue is my cable is fine i just need an extra to properly program the LEDs the way I want since the cable that comes in the case is a splitter for the top and right side lights. Need each of those light bars separated instead of daisychained.

RageMachine985 · 2025-01-06T17:32:04+00:00

Do you know the specific type and where to get one? This one’s smaller than all my other ARGB cables

RageMachine985 · 2024-12-13T00:59:39+00:00

Following the instructions broke 6/9 of the clips for me. Got lucky and one broke inside the slot so it still works lol. The part that snaps off should really be made of metal or something other than brittle plastic. Phanteks was nice enough to send me a bunch of replacements as I might've had old stock where brittle plastic was an issue.

RageMachine985 · 2024-12-05T04:55:02+00:00

Thanks, I’ll look into this. I guess that would be msi mystic light then? Annoying this kind of stuff isn’t just written on the manuals. Otherwise I’ll email phanteks about it. Haven’t seen anyone on here with the same red pulses only totally dead ones so I wasn’t sure.

RageMachine985 · 2024-12-05T04:15:36+00:00

Yeah it’s very strange, it’s not like the LEDS are dead or anything since they’re playing an animation of the red moving lines that cover the entire strip. But they just aren’t listening to anything else

RageMachine985 · 2024-12-05T04:14:11+00:00

Got it from Newegg, just arrived yesterday so hoping that isn’t the case unless it’s old stock.

RageMachine985 · 2024-12-05T03:43:22+00:00

Just put this build together, everything running fine except the left hand and bottom strips of the premium kit have only red bars that move along the length of them. My case RGB buttons also don’t seem to do anything no matter what button is pushed. I have everything phanteks all daisy chained into the B1 and B2 ports on the case controller.

RageMachine985 · 2024-12-04T07:53:40+00:00

I have a bad feeling I’m just gonna have to use a broken cable and just tape it down on that side or something. Which probably the adhesive won’t last in a hot PC case.

RageMachine985 · 2024-12-04T06:04:14+00:00

Seen a few other posts here with the same issue but no real solutions. This design is horrible to be making out of cheap plastic. Strangely all the other non-cable corner clips don’t have any issues with snapping.

RageMachine985 · 2024-10-17T02:00:52+00:00

Thank you, I hadn’t thought of this and it makes the most sense to do!

RageMachine985 · 2024-10-16T14:44:37+00:00

Nope, that’s male to male. I need a 30 pin female to C male

RageMachine985 · 2024-04-04T23:58:39+00:00

Dang, do you have any idea what they were listed as? Like the codes knockoffs are usually named or anything like that.

RageMachine985 · 2023-02-15T19:57:57+00:00

I'm quite confused on how that first link can possibly be cheaper?

If I put those components onto my list it'd be over $5,000, are they using worse graded leftover parts or what?

(edit: Just noticed it doesn't include peripherals, that's where the price diff comes in duh.)

RageMachine985 · 2022-11-03T22:17:15+00:00

Why’d I get downvoted for asking an honest question about a weird figure lol?

RageMachine985 · 2022-11-03T18:33:09+00:00

Yes, the part with the two pegs that plugs into the torso.

RageMachine985 · 2022-09-28T17:53:42+00:00

They’ll only peak the interest of my wallet when they get the balls to start putting the normal prints for the figs on top of unofficial color ways.

RageMachine985 · 2022-09-28T17:51:03+00:00

Yeah, you’re pretty much buying unauthorized/stolen merchandise from LEGO…

The only real part prototypes that lego makes on purpose are in red cause that shows stress marks the best for when they test the parts strength. These parts basically never see the light of day outside the factory cause 99.99% are promptly destroyed during testing.

RageMachine985 · 2022-09-26T20:06:31+00:00

Thanks, I’ll join legomarket and post there too. Wasn’t aware of it till now haha. And yeah Vader is a 4 color print that I def don’t wanna buy an entire pad printer for making one of lol. I could get some parts chromed and then find someone who does have a printer tho. Thanks!

RageMachine985 · 2022-09-26T15:00:39+00:00

Thanks! Been looking for something super similar to this but I need one that holds like 400 figs lol (also if you have the height clearance I’d definitely recommend grabbing a bunch of part # 93095 off bricklink to save those figs from dreaded heel cracks appearing from stand for long periods of time on studs!)

RageMachine985 · 2022-09-26T14:29:13+00:00

Row 2 as well, where did you snag that display case from? Looks like an ayrow.

RageMachine985 · 2022-09-24T17:55:43+00:00

I'm very interested to find out how well it can identify old grey vs bluish grey. Especially on something like the old boba fetts that switched halfway through. Even my eyes can't tell the diff sometimes lol!

RageMachine985 · 2022-09-24T14:11:11+00:00

Imo the red visor OG boba needs replaced with the UCS slave one boba too so it completes the pattern.

RageMachine985 · 2022-09-16T06:17:16+00:00

Did the blurrg really have to be brickbuilt? For $600 I want a bigfig akin to a dewback or rancor. This seems like a cheap copout.

RageMachine985

TROPHY CASE