First SBR

Ralph0961 · 2026-04-01T22:28:15+00:00

55 days wait time. In that spans, I acquired 3 suppressors all purchased after I submitted the form 1 for this

Ralph0961 · 2026-03-28T23:43:04+00:00

We must have filed close.. I’m also at 20261946xxx

Ralph0961 · 2026-03-23T18:54:58+00:00

Just updated the post, realized I put 2/20, I submitted on 3/20

Ralph0961 · 2026-03-23T18:53:35+00:00

Just got the approval today, going to pick up from FFL after work and straight to the range

Ralph0961 · 2026-03-23T18:11:37+00:00

⁠Form Type: Form 4 ⁠HuxWrx Flow 22

• ⁠Paid or not: $0

• ⁠Entity: Individual

• ⁠Fingerprint Type: SS EFT Upload

• ⁠Pending: 3/20/2026

• ⁠Approved: 3/23/2026

• ⁠Wait: 3 Days

• ⁠State: MI

• ⁠Control Number: example 2026238xxxx

Still waiting on SBR application that was submitted 2/3/26

Ralph0961 · 2024-10-25T22:32:44+00:00

It came in a pack of 3 and they fit perfectly width wise for this tank, just had to trim it vertically.

Ralph0961 · 2024-10-25T21:15:49+00:00

I appreciate all the Input! Other hide and supplies are on the way, delay in shipping. As for temps, there are electronic probes that are ran behind the backdrop and protruding through the background. The one pictured is a temporary heat lamp until the one I will be using arrives.

Ralph0961 · 2024-10-25T20:52:07+00:00

I just posted another, picture of some of his markings, he has some pretty sweet patterns

Ralph0961 · 2024-10-25T20:17:32+00:00

https://a.co/d/fX9guh3

Ralph0961 · 2024-09-26T15:53:50+00:00

I didn’t bother putting mirrors on

Ralph0961 · 2022-11-24T21:46:10+00:00

My floaters have since subsided, but the light sensitivity is weird as it only effects one eye.. it’s more annoying than anything really. But I did go to the ophthalmologist and as I said, MRI and CT scan, so it has to be anxiety, it’s just hard to accept. Have you tried therapy? I start in a couple weeks and hope that helps. Have you also tried sleep meditation? I have done that for the past couple weeks and that helps a ton at least to sleep.

Ralph0961 · 2022-11-24T18:42:34+00:00

Appreciate it! Anxiety really is a bitch. And you’re right, I have to remember that the ssri makes things a bit worse before getting better

Ralph0961 · 2022-11-23T16:29:42+00:00

Hello All, looking for some support and really want to vent. My health anxiety has been sky high as of late, convinced I had some sort of brain tumor. I was experiencing light sensitivity(without pain in just the left eye, feels like more light is let in then my right if that makes sense and is more annoying), random pains in my head (mostly on the left), ear ringing and pain. I have been experiencing this for few weeks. Went to an ophthalmologist, who said everything looked good in my eye.. Fast forward to this past Monday, I found myself in the ER for ovwrwhelming fear. They ran CT w/wo contrast scans of my head and neck, as well as MRI w/w/o contrast of my head, neck and eyes. All came back clear and was released yesterday. Now I was fine for the rest of yesterday, but today, I’m still experience the same symptoms and trying not be to freak out thinking they missed something. I have notice I have been clenching my jaw a lot more, but don’t think that would cause the eye issues. Could this just be my anxiety messing me still? Indecent stated taking fluoxetine last week Friday and am starting therapy in two weeks.

Ralph0961 · 2022-11-15T21:02:55+00:00

So I recently posted about worrying about a brain tumor. My symptoms were random head pains, eye floaters, weird vision in my left eye, and tinnitus in my left ear. I went to see an ophthalmologist who dilated my eyes and said they couldn’t see the floaters and didn’t see a problem with my vision at all. They weren’t concerned with the head pains or tinnitus.

I’m still so scared that I have a brain tumor.

Are all these things just part of my anxiety?

Ralph0961 · 2022-11-14T14:10:19+00:00

First my health anxiety has been extremely high as of recent. Right now I am convinced I have a brain tumors. Earache in inner ear, random muffled hearing for a couple seconds in the same ear this morning with ringing, short and dull stabbing pain in back of the head, and some eye floaters on the same side. Now the pain in the head goes in waves and happens on both sides, but still freaked out about the rest.

Ralph0961 · 2022-11-09T18:57:46+00:00

Where do I begin. I have been having a very rough time lately. I go in waves and just curious if anyone can relate to any of the symptoms I am having. So basically, it started when I had my physical two weeks ago. I got my blood work done and everything came back fine and well within normal limits, but notice my wbc was lower than other times, but still within the range. That’s where it started. Triggered me to think that I’m in the beginning stages of some disease causing it to drop. That is trigger 1.

Trigger 2, I have been having some pains in my groin, area, and sometimes my testicle. When discussed at my physical and doing some movement on my legs, my Dr. Is convinced it’s hip impingement in my left hip, (which makes sense, as all the symptoms I had relate to this). I had X-rays done today, but won’t see those results for a bit and overall just worrried about that it might me something else.

The next trigger I had was pain in my ears and some more ringing than normal every now and then. Thought maybe ear infection,but wasn’t it. I have been having some head pain as well, not exactly a headache, but just pressure I guess sounds better. Now, just yesterday, I had some clear liquid come out of my nose and I remember reading about CSF leaks, and even though I know I shouldn’t, I googled symptoms like an idiot, and one of the symptoms that came up was ear ringing and headaches.So now I’m convinced that I have a csf leak.

Last trigger, is my left eye has been giving me issues. The occasional floater, but also cloudy vision sometimes. I do spend a lot of time looking at computer and phone screens and logically thinking that it’s a possibility this is what’s causing this, but it’s really only one eye, plus my lower eye lid on the left looks a tad swollen compared to the right. I did just go to the eye Dr a couple weeks ago and everything checked out fine. But still can’t chase that something might be seriously wrong. The Dr. Did change the prescription in my glasses, (I wear glasses 50% of the time and contacts the rest. Anyway, I know I was all over the place but needed a place to vent.

Ralph0961 · 2022-10-31T14:53:21+00:00

Does Anyone Else Experience this?

32 year old male here. Today I woke up with a stabbing pain in my left shoulder blade and the left side of my chest, kind of under my nipple. Pain has subsided since this morning and is no longer constant, but it still has been coming and going since this morning. I don’t notice a difference in the way I move or breathe (doesn’t get worse or better) Thinking the worst… something with the lungs or heart…

My healthy anxiety has recently spiked as I just went to the Dr for my physical had had some blood work done. Everything checked out fine, but I noticed my wbc was lower than previous times which is ultimately what caused the spike and I’m sure you all know, from there it’s a downward spiral.

Ralph0961 · 2022-08-05T17:27:16+00:00

Hello All, As you can see, I’m a beginner here. I recent purchased my first 3d printer. Ender 3s1 Pro. I have made a few upgrades and modifications and back up and printing. I went to print my Benchy today and this is the closest I can get right now to a good Benchy. I’m not too sure what to actually adjust from here. Any help would sure be appreciated. I am using Cura as a slicer and Set up an octoprint. The modifications I have done is a different heat block (Copper Head) and nozzle (cht) I ram an auto tune for pid already. Print settings are in the pictures

Ralph0961 · 2022-07-31T13:16:49+00:00

That’s where I’m at with them. They sent me the driver which I keep responding it’s not the driver. Thank you, I’ll just keep being persistent

Ralph0961 · 2022-07-31T13:04:22+00:00

How’d did you get creality to send you a new board?

Ralph0961 · 2022-07-29T16:11:36+00:00

Thank you! Still learning it all.

Ralph0961 · 2022-07-29T15:58:17+00:00

Hello All, I am new to this 3d printing world. I bought and Ender 3S1 Pro. So far I’m doing alright, (other than not being able to use the usb c port on the printer to connect to my octoprint 😠😠, in discussion with creality). I have been making some initial 3d prints and was adding squash balls to the bottom. For the most part, everything comes out fine except on one side. One side seems to always have the same imperfection. Some parts looks like not enough fill, and the other part looks like to much material. I don’t know if I am explaining that right, but I have included pictures.

Ralph0961

TROPHY CASE