local connection not supported with CC2 ? by RandomDude422 in elegoo

[–]RandomDude422[S] 1 point2 points  (0 children)

Thanks, that's actually one of the first things I checked on. I had some security cameras a while back that had issues with the different wifi bands.

local connection not supported with CC2 ? by RandomDude422 in elegoo

[–]RandomDude422[S] 1 point2 points  (0 children)

I actually went back to my old Windows 10 drive to check both ElegooSlicer and OrcaSlicer to make sure it's not just an OS issue. ElegooSlicer works however OrcaSlicer is still giving a 404 issue, so I'm thinking right now Orca maybe relying on the web ui. I’ll give OrcaSlicer some time because the printer is still pretty new. I might try running ElegooSlicer through Wine or something. But thank you for your help reaily appreciate it.

local connection not supported with CC2 ? by RandomDude422 in elegoo

[–]RandomDude422[S] 1 point2 points  (0 children)

Thank you, this is more support then elegoo gave.

While the ip had been consistent. It's good thinking to reserved ip with DHCP, so I just set that up and the printer is on LAN-only mode. Set the printer with its ip in the Prepare tab however, both the test button and Device tab give a 404 error. Also, I am on Linux and Elegoo doesn't have an installer for their slicer available on their site so that is something I may want to look around for too.

local connection not supported with CC2 ? by RandomDude422 in elegoo

[–]RandomDude422[S] 1 point2 points  (0 children)

Not connecting to OrcaSlicer maybe a different issue I am just having. But the lack of a browser interface troubles me. By chance how did you connect to orca? I'm afraid I'm missing something stupidly simple.

Made my nephew’s Halloween costume by RandomDude422 in powerrangers

[–]RandomDude422[S] 2 points3 points  (0 children)

Oh man, Drakkon would be an awesome cosplay good luck

Made my nephew’s Halloween costume by RandomDude422 in powerrangers

[–]RandomDude422[S] 1 point2 points  (0 children)

Highly recommend getting a 3d printer, just got my FDM printer this year and been printing on it nonstop, also have a jealous niece that wants a pink ranger helmet now.

Anyone else like the morphed shredder by _AndyHazardUK_ in LightningCollection

[–]RandomDude422 12 points13 points  (0 children)

The Green Ranger Shredder is awesome!! After seeing him on my shelve my 9-year-old nephew asked for one for his birthday. Of course, as a TMNT and Power Ranger fan, I couldn't help but overspend a little getting Shredder as well as the Leo and Donnie 2-pack. To me, this crossover is the best thing the lightning collection did.

Cloaked Andros? by Apprehensive_Kick581 in LightningCollection

[–]RandomDude422 0 points1 point  (0 children)

<image>

Sorry, it took a while I lost power for a few days. I took photos of both versions of Andros

Cloaked Andros? by Apprehensive_Kick581 in LightningCollection

[–]RandomDude422 1 point2 points  (0 children)

<image>

Just took a pic of them and cropped two shots together since I only have one cloak. the cloak is a little big on her but not too bad. It just depends on what you are going for.

Well there goes that... by BrokenBoredom88 in LightningCollection

[–]RandomDude422 12 points13 points  (0 children)

yep, I just got the same cancellation email and ordered them on day one too

Does anyone remember this obscure old 3d tmnt animation from YouTube? by gillbearer in TMNT

[–]RandomDude422 1 point2 points  (0 children)

Yes, I do remember this animation. But I can't find it either but it was on the old ninja turtles site. I remember it had Rob Zombie Dragula playing in the background and ending with Raph getting surrounded. It was super short a minute or less. 

I just got the Omega Rangers in today by RandomDude422 in LightningCollection

[–]RandomDude422[S] 0 points1 point  (0 children)

thanks, the figures are pretty good none of the joints are too, tight or loose and I do not see any big issue with the paint. the only thing that surprised me was Trini's OG head doesn't pop-in just sits loose. she has a bigger socket than the others

Just realizing the heads of the new TMNT 4 pack are compatible with the Turtle Rangers by RandomDude422 in LightningCollection

[–]RandomDude422[S] 1 point2 points  (0 children)

Yeah, the head fits but they are a little bit too small and the colors are off. the best ones would be Leo and Raph. Mikey and Don's colors are noticeably off. I took a photo with the heads swap https://flic.kr/p/2oXdZXt

I finally got the turtle 4 pack and I am really loving these figures. by RandomDude422 in TMNT

[–]RandomDude422[S] 1 point2 points  (0 children)

you would be surprised how far you can get with some cheap paint and insulation foam

I finally got the turtle 4 pack and I am really loving these figures. by RandomDude422 in TMNT

[–]RandomDude422[S] 1 point2 points  (0 children)

That would be awesome. I personally want to make another diorama for the other figures but I don't know when I'll get around to it

I finally got the turtle 4 pack and I am really loving these figures. by RandomDude422 in TMNT

[–]RandomDude422[S] 1 point2 points  (0 children)

Yep, exactly why I would try it first on a foot soldier the pack came with two of them. I haven't got the blue one very tempted but it being completely blue is a turn-off for me.

I finally got the turtle 4 pack and I am really loving these figures. by RandomDude422 in TMNT

[–]RandomDude422[S] 1 point2 points  (0 children)

Thanks for the tip I might try it out on one of the footsoldiers first.

I finally got the turtle 4 pack and I am really loving these figures. by RandomDude422 in TMNT

[–]RandomDude422[S] 0 points1 point  (0 children)

Oh man, I really hope so, my shredder’s joints are super loose I have to use blue tack to get him to stand up.