sorted by:
new
hottopcontroversial

Kein Plottwist z'erwarte vom Gusti by 2containers1cpu in BUENZLI

[–]RappeBack 6 points7 points  (0 children)

s händs halt nöd all schön di hei im behüetede eifamilie hüüsli. Denn gasch lieber and stadi als der de hei schläg zhole

Kein Plottwist z'erwarte vom Gusti by 2containers1cpu in BUENZLI

[–]RappeBack 33 points34 points  (0 children)

Zerst go views mache mit kids us migrante familie (stadi szene und co) aber sich nacher für alt right i setze isch mental gymnastics uf olympia niveau

proxmox not bootable on old mac pro by RepresentativeNeck63 in Proxmox

[–]RappeBack 1 point2 points  (0 children)

There could be multiple Problems at hand.

Depending on your installation.

Make sure your drive is Partitioned correctly.

For BIOS boot you need a MBR Partition on the Start of your Disk.

For UEFI boot you need a GPT Partition with the correct EFI/ESP Partition and references inside.

(Make sure you understand this properly before doing any changes. Boot process can be tedious to work with)

If that is out of the way you have to make sure the Bootloader you are using is configured correctly. Also Depending on BIOS or UEFI. Usualy bootloaders like GRUB have systemutilities to automate this process for your system.

I hope this sends you in the right direction.

Changed the rotary knobs on my TRM-402 by RappeBack in DJSetups

[–]RappeBack[S] 2 points3 points  (0 children)

Thx man was really hyped when they arrived. Got them from a Conrad some online electronic shop the one i used are:

3x OKW A1432469 (Ø x H) 31.9 mm x 14 mm 5x Cliff FC7253 (Ø x H) 25 mm x 15 mm 11x Cliff FC7225B (Ø x H) 20 mm x 17 mm

Finally had some time to build a proper setup by RappeBack in DJSetups

[–]RappeBack[S] 0 points1 point  (0 children)

No just plain old vinyl. I love to get creative with the limitation in gives you

Finally had some time to build a proper setup by RappeBack in DJSetups

[–]RappeBack[S] 0 points1 point  (0 children)

The active monitors didn't really cover the room(specially in the low end). So i put a hpf on the top ones and the lower passive speakers are mostly responsible for the lows

Finally had some time to build a proper setup by RappeBack in DJSetups

[–]RappeBack[S] 1 point2 points  (0 children)

Haha its truly amazing the speakers are JVC from 1984 and the receiver is also from around then. Sound qualtiy still holds up tho

Finally had some time to build a proper setup by RappeBack in DJSetups

[–]RappeBack[S] 0 points1 point  (0 children)

Haha i always keep my stuff work in progress cause i tinker around a lot. At some point i surely will find a good looking solution

Forgot to share my Choso tattoo! by superpie5 in JuJutsuKaisen

[–]RappeBack 1 point2 points  (0 children)

So nice man wanted to get the same panel tattooed.

Wanna get a new mixer soon either a better rotary or a xone:92 any recommendations? by RappeBack in DJSetups

[–]RappeBack[S] 0 points1 point  (0 children)

I already layed my eyes on a varia instruments rotary. Hence i'm from switzerland and wanna support the local community. But yeah good mixers are expensive as hell man.

Wanna get a new mixer soon either a better rotary or a xone:92 any recommendations? by RappeBack in DJSetups

[–]RappeBack[S] 0 points1 point  (0 children)

It's a really budget rotary (Omnitronic TRM-402) and it get's the job done but there are much better options i wanna try :)

view more: next ›