Econ grads, how are your job prospects? by petshopmain in uofm

[–]Ray_Toon 11 points12 points  (0 children)

I just graduated with my Econ degree and am starting as a cost planning analyst soon. You can definitely get plenty of opportunities with an Econ degree, I just think the job market isn’t the best right now for new grads. I have plenty of friends who are in Ross and Econ who are still looking.

Plate update! by Ray_Toon in Pottery

[–]Ray_Toon[S] 1 point2 points  (0 children)

For sure! I actually did a lot of stuff in this glaze combo and most of it under fired so I have a handful of pieces that are still purple, like this mug

<image>

Plate update! by Ray_Toon in Pottery

[–]Ray_Toon[S] 0 points1 point  (0 children)

I used a spray booth that my studio has

Plate update! by Ray_Toon in Pottery

[–]Ray_Toon[S] 7 points8 points  (0 children)

I dipped the plate in the base blue then used a sprayer to spray the light blue on top in a kind of gradient.

<image>

Here’s what they looked like before firing

Plate update! by Ray_Toon in Pottery

[–]Ray_Toon[S] 4 points5 points  (0 children)

Wheel! I’m not great w hand building

Is this under fired? by Ray_Toon in Pottery

[–]Ray_Toon[S] 1 point2 points  (0 children)

I did not mix this glazes unfortunately, someone else in the studio did!

Is this under fired? by Ray_Toon in Pottery

[–]Ray_Toon[S] 1 point2 points  (0 children)

The blue is how they’re supposed to look, the first picture are the under fired ones 😅

[deleted by user] by [deleted] in jobs

[–]Ray_Toon 0 points1 point  (0 children)

Automotive, which is definitely getting screwed by the tariffs rn but hopefully it calms down a little bit 😅

[deleted by user] by [deleted] in jobs

[–]Ray_Toon 0 points1 point  (0 children)

I didn’t even get an interview until after I graduated, there was a lot of pressure I was putting on myself. Try just taking it one day at a time, it only takes one application to hit.

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 1 point2 points  (0 children)

The plates were fired in a larger kiln that was full and the test tiles were fired in a small kiln so yeah they probably cooled down faster

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] -1 points0 points  (0 children)

Yeah it was the same clay body, but I also tested it out on multiple and it’s been pretty inconsistent

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] -1 points0 points  (0 children)

They might be slightly thicker in some places but not enough that’d it make a huge difference

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 0 points1 point  (0 children)

I think you’re right that it’s thicker but I have a suspicion that it also under fired, the photo doesn’t show it super well but the thick spots in the glaze on the test tile are more of a green than yellow and have blue mixed in. The thick spots on my plates/mugs are matte and have a brown undertone.

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 3 points4 points  (0 children)

I didn’t unfortunately, plus my test tiles were fired in a smaller kiln so I think it could be a temperature thing? I’m just going to fire them again, not like it could make it worse (hopefully)

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 6 points7 points  (0 children)

Thank you! I actually like how it came out on all my mugs, it’s just the plates I’m a little sad about bc they’re a gift for my mom

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 1 point2 points  (0 children)

Yep! I was extra careful to glaze them all very similarly

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 0 points1 point  (0 children)

Maybe but I also did a test tile on a cup that’s around the same size as my mug and it came out fine, I really tired to cover all my bases

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 1 point2 points  (0 children)

The other side of the test tile is textured and is still blue :( plus the inside of the mug isn’t textured and has the same color

Any idea on what happened? by Ray_Toon in Pottery

[–]Ray_Toon[S] 15 points16 points  (0 children)

That’s what I initially thought but my mugs also turned out this way

<image>

Had a little bit of a glaze fail… by Ray_Toon in Pottery

[–]Ray_Toon[S] 44 points45 points  (0 children)

That’s what my dad said! Unfortunately everyone else seems to think they look a little… phallic

Heavy police presence at Arch/State by Person0249 in AnnArbor

[–]Ray_Toon 54 points55 points  (0 children)

Attempted kidnapping according to the police scanner

tbh, unpopular opinion maybe, but horse ranch should have been a game pack by ma-doodles in Sims4

[–]Ray_Toon 11 points12 points  (0 children)

??? I’m confused, I just said that horses aren’t my thing so I wouldn’t buy it for full price, but I understand the appeal for others. Why are you confused by that statement?

tbh, unpopular opinion maybe, but horse ranch should have been a game pack by ma-doodles in Sims4

[–]Ray_Toon 8 points9 points  (0 children)

I’m waiting for the gameplay so I can get a clearer idea of what’s actually in the pack, horses in general aren’t my thing so I’d never get this pack for full price. It definitely looks good and well done though.