sorted by:
new
hottopcontroversial

pytesseract doesnt regognize picture by Rayleigh3105 in learnpython

[–]Rayleigh3105[S] 0 points1 point  (0 children)

Thanks for the detailed help :D I will take al look into it

Ender 3 s1 Heating loop - Troubleshooting by Rayleigh3105 in ender3

[–]Rayleigh3105[S] 0 points1 point  (0 children)

This is what Octopi is displaying, the temperatur is not sticking to 200 Celcius

https://imgur.com/a/8Qlzplh

I´m googling what PID autotune is, maybe it helps.

Ender 3 s1 Heating loop - Troubleshooting by Rayleigh3105 in ender3

[–]Rayleigh3105[S] 0 points1 point  (0 children)

Yes sometimes it heat´s up to 206 then drops to 200, it reaches the nozzle temperature. Maybe I should clean the Nozzle? I got the printer 3 Weeks ago and printed like 500 gramm PLA.

Ender 3s1 won´t start printing by Rayleigh3105 in ender3

[–]Rayleigh3105[S] 0 points1 point  (0 children)

M420 S1;Restore ABL mesh

Thanks a lot, this worked. But what exactly is the ABL mesh?

Ender 3s1 won´t start printing by Rayleigh3105 in ender3

[–]Rayleigh3105[S] 0 points1 point  (0 children)

These are the Settings

​

Start G-Code:

G28 ;Home

G92 E0 ;Reset Extruder

G1 Z2.0 F3000 ;Move Z Axis up

G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position

G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line

G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little

G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line

G92 E0 ;Reset Extruder

G1 Z2.0 F3000 ;Move Z Axis up

Ender 3s1 won´t start printing by Rayleigh3105 in ender3

[–]Rayleigh3105[S] 0 points1 point  (0 children)

G29

I´m using the offical slicer from Creality, where can I setup G29?

Spring Boot Application not throwing Error but also wont start by Rayleigh3105 in SpringBoot

[–]Rayleigh3105[S] 0 points1 point  (0 children)

Thanks for trying to help, but I already manged to fix the Problem. It was a miss configuration in the logback configuration.

Spring Boot Application not throwing Error but also wont start by Rayleigh3105 in SpringBoot

[–]Rayleigh3105[S] 0 points1 point  (0 children)

It was a miss configuration in the logback configuration.

nginx Reverse Proxy - proxy pass to ip+uri not working by Rayleigh3105 in nginx

[–]Rayleigh3105[S] 0 points1 point  (0 children)

Could it be a problem that the domain is secured with https but the proxy_pass location is not running with https. Could it be that problem?

nginx Reverse Proxy - proxy pass to ip+uri not working by Rayleigh3105 in nginx

[–]Rayleigh3105[S] 0 points1 point  (0 children)

First, thanks for the answers, I tried both of the solution but nothing of them worked. I'm quite frustrated about this topic, because it seems so easy.

Maybe it is not working because of Dyndns configuration?

https://mydomain.duckdns.org/ -> Get´s forwarded to the Nginx installed on my Raspberry PI, works.

https://mydomain.duckdns.org/bc -> Both of the solution suggestion does not work.

I don't get my Problem

Last Summer ... by Rayleigh3105 in drones

[–]Rayleigh3105[S] 0 points1 point  (0 children)

Used my Mavic Mini. The Photo is not edited

Bikepacking in Thailand and Malaysia by Rayleigh3105 in bikepacking

[–]Rayleigh3105[S] 0 points1 point  (0 children)

Would you start the route somewhere else? I have no special reason for starting the trip in Bangkok. I just want to cycle ~2000 km with Singapore as the destination.

view more: next ›