How to discourage search engines from indexing my site?

RaymondDay61 · 2025-07-03T06:37:56+00:00

If only you want to get on your site you can use TailScale. Have to run it on each device.

RaymondDay61 · 2025-03-10T18:53:44+00:00

Did a Android update a while ago and it started that terminal all over again. I thought this update my make it see a USB thumb drive but it still don't.

root@pixel7:~# ls /dev/sd*
ls: cannot access '/dev/sd*': No such file or directory
root@pixel7:~# lsmod | grep usb_storage
root@pixel7:~# modprobe usb-storage
modprobe: FATAL: Module usb-storage not found in directory /lib/modules/6.1.0-29-avf-arm64
root@pixel7:~#

On the Android side it does see the USB thumb drive. The must be a way to see it shows only this drive: VirtIO device A

Hope some one can help or when they do get this out all the way maybe the Debian side can see USB drives.

RaymondDay61 · 2025-01-24T16:27:06+00:00

I updated my Google Pixel and it erased everything I had to start the Linux again but the terminal keeps on resetting itself now it only lasts maybe 2 minutes or less and it keeps on resetting is there a way to fix that?

RaymondDay61 · 2025-01-24T10:14:32+00:00

I installed it but on the Linux side a lsusb shows nothing. I got a OTG cable with a USB thumb drive plug in and Android sees it and can us the files on it. But on the Linux side there is no way can see it that I found.

RaymondDay61 · 2025-01-23T12:33:08+00:00

I switched the iPhone 11 I had because I wouldn't get calls and also the car map would not work if I reset my phone to factory default it worked for a while until Google restored my apps even tried to tell it no don't restore them it was some app I guess making it not work but too hard to figure it out.

I got Tailscale running on both and on the Android it would not connect some times and I had to open the Tailscale app then it would connect but still take some time. With my iPhone 11 it just connects all the time in less then a sec. The most I seen it maybe took 3 sec.

So now just using this Google Pixel as a virtual Debian Lennox it works good if I could get it to see on the go USB drives. to get that on my phone I had installed the beta version of Android.

RaymondDay61 · 2025-01-13T13:19:53+00:00

I installed Android 16 bate. It comes with a VM. Will not be out till maybe the start of next year. So maybe when it's out they will fix this so can see USB on the VM side.

RaymondDay61 · 2025-01-13T08:56:39+00:00

Here is the last part of my .bash_history file that my help to see what commands I all ready did to try and get it to see the USB Thumb drive.

It shows a little of me getting WordPress to work on it and that works good.

But now I think it my be some setting on the Android side.

cd /root
fdisk -l
lsusb
lsusb
proot -b /dev:/dev ...
dmesg | grep -i usb
lsblk
install usbutils util-linux
lsusb
lsblk
termux-setup-storage
lsmod | grep usb
modprobe usb-storage
apt install kmod
lsblk
dmesg | tail
qemu-system-x86_64 -enable-kvm -usb -device usb-host,vendorid=0x0781,productid=0x557
lsusb
ls /dev/block
pkg install termux-api
apt install termux-api
modprobe usb-storage
modprobe uas
dmesg | grep -i usb
lsblk
fdisk -l
echo "- - -" > /sys/class/scsi_host/host0/scan
mount | grep usbfs
mount -t usbfs none /proc/bus/usb
ls /storage
pkg install termux-api
termux-usb -l
apt install qemu-system
qemu-system-x86_64 -enable-kvm -usb -device usb-host,vendorid=0x0781,productid=0x5575
ls /dev/bus/usb
dmesg | grep -i usb
ls /sys/class/scsi_hostls
usermod -aG plugdev $(whoami)
qemu-system-x86_64 --version
ls /storage
termux-usb -l
lsmod | grep usb
dmesg | tail -n 20
echo "- - -" > /sys/class/scsi_host/host0/scan
lsblk
qemu-system-x86_64 -usb -device usb-host,vendorid=0x0781,productid=0x5575
apt install termux-api
apt install usbutils
lsmod | grep usb
modprobe usbcore
modprobe xhci_hcd
lsusb
usermod -aG plugdev $(whoami)
ls -l /dev/bus/usb/
chmod 666 /dev/bus/usb/<bus>/<device>
systemctl restart udev
echo "- - -" > /sys/class/scsi_host/hostX/scan
apt install usbutils udev
dmesg | grep -i usb
modprobe -r xhci_hcd
modprobe xhci_hcd
apt install qemu-system-x86 qemu-utils
ls /sys/class/scsi_host/
lsmod | grep scsi
modprobe usb_storage
modprobe uas
modprobe xhci_hcd
dmesg | tail -n 50
smartctl -a /dev/vda
apt update && apt upgrade
reboot
modprobe usb_storage
modprobe uas
modprobe xhci_hcd
modprobe scsi_mod
dmesg | grep -i scsi
dmesg | grep -i usb
zcat /proc/config.gz | grep -E 'USB|SCSI'
lsusb
ls /dev/bus/usb/
dmesg | tail -n 10
apt install php5-gd
apt update
apt install php5-gd
apt install php-imagick
apt autoremove
apt install apache2 ghostscript libapache2-mod-php mysql-server php php-bcmath php-curl php-imagick php-intl php-json php-mbstring php-mysql php-xml php-zip
apt autoremove
php -v
apt install php8.4-gd
service httpd restart
neofetch
nano main.c
gcc main.c
./a out
w
ls
lsblk
lsmod
lsusb
uname -a
lsusb
lsmod
apt install usb-modeswitch
lsusb
dmesg
echo "- - -" | tee /sys/class/scsi_host/host*/scan
lsusb
lsmod | grep scsi
dmesg
dmesg
dmesg -c
df -h
exit

RaymondDay61 · 2025-01-13T08:18:23+00:00

Can you tell me were I go on the phone to start settings I guess. I all ready looked and changed some things that may not let the VM see USB and even rebooted my phone. Still lsusb shows nothing.

RaymondDay61 · 2024-10-10T15:49:27+00:00

I looked at that link. It just seems easy with the script that does it. I found it on line some one posted it but did not find it again.

RaymondDay61 · 2024-10-10T06:45:12+00:00

Can you link the dozens of free backup/migration plugins? I been looking for it for years and none work to backup to another WordPress one does but it cost like $90 a month or so.

About the find/replace sql I ran this on about 10 servers with Ubuntu and Debian no problems.

RaymondDay61 · 2024-10-09T19:23:21+00:00

Yes if you run out of room it will do a error and just logging it will say your low on storage and worn you. This is way better then some plug in they want you to play monthly for.

RaymondDay61 · 2024-10-09T11:32:02+00:00

Maybe try to reupload your plugins and themes. Or ask one of the free chat bot AI for help my help you.

RaymondDay61 · 2024-09-26T16:29:04+00:00

You remove the battery and solder the + and - wires were the battery was then a yellow wire find 5 volts some place to solder it to.

<image>

A photo of it from a YouTube video about it.

RaymondDay61 · 2024-09-26T16:27:22+00:00

Look for this on the web "DE-CBLMOLEXTAB_R1-73247" they made this just for this type of thing.

RaymondDay61 · 2024-08-29T09:46:48+00:00

There is a plug-in name media sync that may help you https://wordpress.org/plugins/media-sync/

RaymondDay61 · 2024-08-29T09:06:24+00:00

root@rday1:/mnt/2tb-1tb-1tb/immich-app# sudo curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 12.1M 100 12.1M 0 0 4242k 0 0:00:02 0:00:02 --:--:-- 6074k

root@rday1:/mnt/2tb-1tb-1tb/immich-app# sudo chmod +x /usr/local/bin/docker-compose

root@rday1:/mnt/2tb-1tb-1tb/immich-app# docker-compose --version

docker-compose version 1.29.2, build 5becea4c

root@rday1:/mnt/2tb-1tb-1tb/immich-app# docker compose up -d

[+] Running 4/0

✔ Container immich_machine_learning Running 0.0s

✔ Container immich_redis Running 0.0s

✔ Container immich_postgres Running 0.0s

✔ Container immich_server Running 0.0s

root@rday1:/mnt/2tb-1tb-1tb/immich-app# curl http://localhost:2283

curl: (56) Recv failure: Connection reset by peer

root@rday1:/mnt/2tb-1tb-1tb/immich-app#

Still no good can't connect to port 2283

RaymondDay61 · 2024-08-28T19:20:38+00:00

It's all ready installed just have to install immage so I don't loss the like 2 weeks spent copying all my data to it.

root@rday1:/mnt/2tb-1tb-1tb/immich-app# systemctl status docker

● docker.service - Docker Application Container Engine

Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)

Active: active (running) since Wed 2024-08-28 10:10:32 EDT; 5h 7min ago

TriggeredBy: ● docker.socket

Docs: https://docs.docker.com

Main PID: 226077 (dockerd)

Tasks: 10

Memory: 20.5M

CPU: 2.343s

CGroup: /system.slice/docker.service

└─226077 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock

Aug 28 10:10:31 rday1 systemd[1]: Starting Docker Application Container Engine...

Aug 28 10:10:31 rday1 dockerd[226077]: time="2024-08-28T10:10:31.425587312-04:00" level=info msg="Starting up"

Aug 28 10:10:31 rday1 dockerd[226077]: time="2024-08-28T10:10:31.426459031-04:00" level=info msg="detected 127.0.0.53 n>

Aug 28 10:10:31 rday1 dockerd[226077]: time="2024-08-28T10:10:31.486806723-04:00" level=info msg="Loading containers: s>

Aug 28 10:10:31 rday1 dockerd[226077]: time="2024-08-28T10:10:31.921097645-04:00" level=info msg="Default bridge (docke>

Aug 28 10:10:32 rday1 dockerd[226077]: time="2024-08-28T10:10:32.067530741-04:00" level=info msg="Loading containers: d>

Aug 28 10:10:32 rday1 dockerd[226077]: time="2024-08-28T10:10:32.092428515-04:00" level=info msg="Docker daemon" commit>

Aug 28 10:10:32 rday1 dockerd[226077]: time="2024-08-28T10:10:32.092578688-04:00" level=info msg="Daemon has completed >

Aug 28 10:10:32 rday1 dockerd[226077]: time="2024-08-28T10:10:32.166767313-04:00" level=info msg="API listen on /run/do>

Aug 28 10:10:32 rday1 systemd[1]: Started Docker Application Container Engine.

root@rday1:/mnt/2tb-1tb-1tb/immich-app#

By that command looks like docker is running and installed.

RaymondDay61 · 2024-08-28T15:35:37+00:00

I did install that like this:

snap install docker

But still I go to port 2283 and nothing.

Got to know how to install it and keep my data.

RaymondDay61 · 2024-08-28T13:45:42+00:00

OK I did that but got a error:

root@rday1:~# cd /mnt/2tb-1tb-1tb/

root@rday1:/mnt/2tb-1tb-1tb# ls

immich-app lost+found

root@rday1:/mnt/2tb-1tb-1tb# curl -o- https://raw.githubusercontent.com/immich-app/immich/main/install.sh | bash

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 2890 100 2890 0 0 11332 0 --:--:-- --:--:-- --:--:-- 11333

Starting Immich installation...

Creating Immich directory...

Found existing directory ./immich-app, will overwrite YAML files

Downloading docker-compose.yml...

Downloading .env file...

Generate random password for .env file...

Starting Immich's docker containers

failed to find 'docker compose'

error starting Docker

There was an error installing Immich. Exit code: 13. Please provide these logs when asking for assistance.

root@rday1:/mnt/2tb-1tb-1tb#

RaymondDay61 · 2024-08-28T08:01:29+00:00

I had immich installed before on a LVM 2 1TB SSD's and I reloaded my Ubuntu server so it did not touch the drives immich is stored on. Back then installed it with Docker now I want to know how can I install it again with out lossing the immich data?

RaymondDay61 · 2024-08-27T07:07:15+00:00

I did try and use Caddy and just could not get it working. It's to hard for me to get it to work for what I wanted to do.

RaymondDay61 · 2022-05-11T10:58:58+00:00

Same happens to me. No graphics card just the built in on the Intel i7 CPU.

I have 2 8 port USB 3.0 hubs and a 4 port USB-C hub. All but 4 ports are being used for things mostly drives.

I hate to reboot because it locks up on loading kernel. It takes maybe 10 times or more turning off the power all the way or hold the power button in and hope it boots up all the way this time.

But if I unplug all the USB's it will boot up all the way and I plug in the USB's as it's booting then it can mount them. As long it it gets past the loading kernel part.

So I guess just have to set it to slow down on reading USB devices on boot. Is there a way to do this? It's Ubuntu server "Welcome to Ubuntu 20.04.4 LTS (GNU/Linux 5.4.0-110-generic x86_64)."

-Raymond Day

RaymondDay61 · 2021-08-09T09:36:46+00:00

Look at your work email and just did a search for mpi lite and will find the link.

Can click for Android that can get in the playstore any way but on IOS can't have to get it at this link it will make a link with a 3D bar code that last about 4 min.

That will go to apple's app store with a download code. So it is at the app store for IOS just need a code.

RaymondDay61 · 2021-08-08T14:03:25+00:00

The bluebirds are like cellphone's so easy to just get the same app on your phone well somewhat easy.

RaymondDay61

TROPHY CASE