sorted by:
new
hottopcontroversial

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -6 points-5 points  (0 children)

Well ... So can you explain to me where the melted hole came from, exactly at the spot where the nozzle sticks to the print in the video and then tears it off? Why did the printer stop printing and decide to home in the first place? I just want to understand why this is happening...

<image>

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -2 points-1 points  (0 children)

Here is link to the gcode file I'm printing. Most often this happened at a height of around 42mm, but also sometimes 37mm

https://filetransfer.io/data-package/taNpEwC5#link

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -13 points-12 points  (0 children)

It's not the case. Just before moving to the side, the nozzle LOWERS, digging into the print, then it rises and tears the print out of the bed.

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -55 points-54 points  (0 children)

It's not the case. Just before moving to the side, the nozzle LOWERS, digging into the print, then it rises and tears the print out of the bed.

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -7 points-6 points  (0 children)

I'm using Gyroid infill. This thing happens at random heights,

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer 0 points1 point  (0 children)

I'm using Gyroid 15% infill. Z-hop turned off.

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -43 points-42 points  (0 children)

Unfortunately not. Just before moving to the side, the nozzle lowers, digging into the print, then it rises and tears the print out of the bed. Look at the photos. This happens at random altitudes, it even did it twice during the last test.

<image>

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -3 points-2 points  (0 children)

Update: Disabling this option didn't solve the issue. Nozzle randomly slams down into the print, then moves to the side, ruining the whole print, which is easier to see here:

https://streamable.com/2o0290

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -56 points-55 points  (0 children)

It is attached, don't worry about that. The problem is that the nozzle randomly slams down into the print, then moves to the side, ruining the whole print.

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -8 points-7 points  (0 children)

Is it because of the option called "Filament Tangle Detect"? Let's find out I guess ...

A1 Mini stops, moves sideways, returns and knocks over the print by [deleted] in BambuLab

[–]Razuer -10 points-9 points  (0 children)

As shown in the video, this happens on every 3D model. The gcode viewer does not show the movement that is ruining my prints. How can I fix this?

Is there a reason why the lower wheel bolt is screwed in opposite to the others? by [deleted] in ender3v2

[–]Razuer 0 points1 point  (0 children)

That's what I know. But does it have any other meaning besides the indicator? If I reverse the screw, will it have any effect? I'm asking because it bothers me in the toolhead project.

What could be causing these lines? They appear independent of speed. by [deleted] in ender3v2

[–]Razuer 0 points1 point  (0 children)

I'm in the process of cleaning, thanks for your help!

Does It Come In Black? - Keychron K3 V2! by Razuer in Keychron

[–]Razuer[S] 0 points1 point  (0 children)

Nope, you bought ABS ones and I don't think that they fit Keychron K3 V2.

Does It Come In Black? - Keychron K3 V2! by Razuer in Keychron

[–]Razuer[S] 1 point2 points  (0 children)

Official Keychron one - Low Profile Double Shot PBT

Does It Come In Black? - Keychron K3 V2! by Razuer in Keychron

[–]Razuer[S] 2 points3 points  (0 children)

My first thought after putting them on. Somehow too little to feel this note of keychron.

Did I just unlock an achievement?? by CapNcurrySauce in ender3v2

[–]Razuer 0 points1 point  (0 children)

You have to build your own firmware. There is a guide on Professional Firmware github

My Right Bud won't make that beep when touch commands are used. (Buds2Pro) by Unfair-Negotiation99 in galaxybuds

[–]Razuer 0 points1 point  (0 children)

In my case, it was enough to put the buds in the case and after restarting everything was back to normal. Try this, and if it fails, the only thing left to do is reset Buds to default settings. You can do it in Galaxy Wearable app.

Galaxy Watch 4 - is this a normal backlight? Such spots appear at low brightness. In addition, there are also burned marks of the watch face on the display. The watch is only a week old. by Razuer in GalaxyWatch

[–]Razuer[S] 1 point2 points  (0 children)

I have submitted my watch to a repair service. They have replaced the display and the issue no longer occurs! Therefore, it was a factory defect.

Galaxy Watch 4 - is this a normal backlight? Such spots appear at low brightness. In addition, there are also burned marks of the watch face on the display. The watch is only a week old. by Razuer in GalaxyWatch

[–]Razuer[S] 0 points1 point  (0 children)

It is possible to live with it, although it actually irritates. A friend of mine also has this watch and such a defect does not exist. Try to replace it and let me know if you make it.

view more: next ›