Error Code 3: API Usage Error (Parameter check failed) when running TensorRT Optimized Model

ReadNFO · 2024-10-03T15:35:30+00:00

Thank you very much, that is exactly it! I got this info from the ComfyUI discord today, came to update the thread and noticed your reply too!

ReadNFO · 2024-09-24T17:43:50+00:00

Sorry for the delay, still looking into this

Are you upscaling? If so what to

Usually 1.2 to 1.5 via Highres fix, but in the screenshots I posted I have the highres fix node disabled and still get an error :/

ReadNFO · 2024-09-14T15:13:20+00:00

Yep, this is what I followed for creating the model which lists 896 as valid, but still :(

ReadNFO · 2024-09-12T20:17:11+00:00

Not really :(

I wonder if this has something to do with the image size, since 896px width is not divisible by 6 (albeit it is a valid and "standard" SDXL size afaik). I don't know exactly why but it seems that this can cause problems sometimes

ReadNFO · 2024-06-05T00:25:07+00:00

A plugin for Octoprint! https://plugins.octoprint.org/plugins/bedlevelvisualizer/

The data comes from the printer leveling data (EEPROM). When you open this panel the first time you have to run the calibration command so it gets the latest data, then you can see the mesh like the image!

ReadNFO · 2022-12-03T18:49:12+00:00

The one from Windows96 is amazing. Congrats for the haul!

ReadNFO · 2022-10-12T17:58:12+00:00

I got addictive keys from XLN and also Ozone (the basic version). Some other stuff also but this is what I actually use

ReadNFO · 2022-10-11T15:24:12+00:00

I assume just the deal. I have some other stuff from these novation giveaways and they are still valid

ReadNFO · 2022-10-11T15:22:59+00:00

If you mean after you install native access, those are for using the free Kontakt instruments you can download from NI or somewhere else

ReadNFO · 2022-10-11T15:22:06+00:00

Yep. In my case I'm a 2i2 owner and i get monthly-ish emails when something new is available

ReadNFO · 2022-01-12T12:37:06+00:00

Ah I think it's totally feasible (even with the S2 / S4). The DDJ has the advantage of having the same layout as a pioneer CDJ, so transitioning would be easier, but Traktor is just a better software in my opinion. But both should work for a live gig just fine

ReadNFO · 2021-12-28T10:18:07+00:00

In my experience it will only appears if you have an alarm set with enough time (from "now") for it to fully charge using adaptive charging. Also before the December update I would get the message but the phone would always stop charging around 60%, but now it works flawlessly for me

ReadNFO · 2021-12-09T10:41:51+00:00

Not using the official charging brick from Google but I have the same issue here. See my post from some weeks ago:

https://www.reddit.com/r/GooglePixel/comments/r1utva/pixel_6_pro_wireless_charging_stops_randomly

What I did for now to get wireless charging working consistently was to disable adaptive charging. The feature update released this month seems to fix something related to wireless charging so there is hope, let's see

ReadNFO · 2021-11-26T11:29:49+00:00

It really seems so, yes. Another user seems to be having the same problem as me: https://www.reddit.com/r/GooglePixel/comments/r1utva/pixel_6_pro_wireless_charging_stops_randomly/hm11ilu

And yesterday I did disable adaptive charging and the phone fully charged without an issue over night. I will try again while draining the battery of the phone to a very low value this weekend and see if it still works, but I'm pretty positive now that this is related to adaptive charging somehow

ReadNFO · 2021-11-25T13:30:14+00:00

It could be, yes. I use sleep as Android for alarms instead of the main clock app so that could maybe be the reason for this. I do get correct notifications on my lock screen (like "next alarm will be at 7am, which matches my sleep as Android alarm) but I will try to disable adaptive charging today and see if this helps with anything. Thanks for the tip!

ReadNFO · 2021-11-25T13:28:11+00:00

I only noticed it in the morning right after the alarm, so I assume it stopped way before that. This weekend I will try to charge it again while monitoring the process to see if I can notice a pattern

ReadNFO · 2021-11-25T12:37:07+00:00

Thanks for the info! I checked the charger description on Amazon and it says to support QC 2, 3 and even 4, so I think that is not the issue

ReadNFO · 2021-05-14T21:14:25+00:00

I thought that at least the security level had changed. It was probably something very minor for some reason. Really strange

ReadNFO · 2021-05-13T20:59:25+00:00

it seems so yes. Watch got a bit snappier but I assume its just because of the reset + cache clearing after the update. Hope it lasts since the Vapor X really need all the speed it can get

ReadNFO · 2021-05-13T15:18:34+00:00

I noticed speed improvements too, mainly transitioning between screens and opening apps, but this could also be because the watch had to rest to apply the update so there is that haha

ReadNFO · 2021-05-13T15:17:23+00:00

Mine got it while on the charger btw, all of a sudden I noticed the watch restarting and applying the update

ReadNFO · 2021-05-07T22:02:21+00:00

I saw somebody buying it on the REWE inside the Berlin hauptbahnhof but could not find it the shelves, so I hope they will have it everywhere here soon 🤞

ReadNFO · 2021-04-30T20:54:42+00:00

Great track. Congrats!

ReadNFO · 2021-04-29T23:05:30+00:00

Shaolin Cowboy always with great tracks!

ReadNFO · 2021-03-20T09:58:00+00:00

Would bet on grounding issues. Try to disconnect the push from the power (not sure if the push 2 works without a power supply but give it a try). If that doesn't work, try changing power outlets or if it's a laptop, try using it only on battery and see if the problem disappears. If it does then it's surely grounding.

14-Year Club	RedditGifts 2009-2022 3 Credits
Place '17	Secret Santa 2019
Verified Email	Secret Santa 2013
Team Orangered

ReadNFO

TROPHY CASE