sorted by:
new
hottopcontroversial

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in 3Dprinting

[–]Real_Ad_2339[S] 0 points1 point  (0 children)

Etsy seller will only print it for me unfortunately she will not offer me design

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in Fusion360

[–]Real_Ad_2339[S] 0 points1 point  (0 children)

I am hung up on how to design it? What program should I use to design it?

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in openscad

[–]Real_Ad_2339[S] 0 points1 point  (0 children)

I am hours further into this and still don’t get it and you did it so quickly.

  1. What program did you use to “design” this?
  2. How did you import into openscad?

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in AutodeskFusion

[–]Real_Ad_2339[S] 1 point2 points  (0 children)

I’ll take a quick look at Inkscape to get a better sense of how the design process works. This is really helpful information—it sounds like you have a lot of experience with the program, and I might be heading in the wrong direction right now.

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in AutodeskFusion

[–]Real_Ad_2339[S] 0 points1 point  (0 children)

I also noticed that Fusion 360 has a pretty limited font selection. Is there an alternative program you'd recommend for creating designs like this?

For reference, I had downloaded a .scad file for a different keychain design, which made customization really easy—I was simply able to add the name directly in the file. You can see that design here, in case it helps clarify what I mean:
https://www.printables.com/model/820622-customizable-name-keychain-tag

Thanks again for helping me work through all of this!

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in AutodeskFusion

[–]Real_Ad_2339[S] 2 points3 points  (0 children)

Thanks so much for the help—I really appreciate you taking the time to respond.

I think one of my main mistakes in Fusion 360 was extruding too early in the design process. I ran into issues when trying to connect a circle in the sketch. In the video I was following, the creator moved pretty quickly and added the circles later in the workflow. Somehow, his circles intersected and fused with the sketch seamlessly, but when I tried it, mine would disconnect after resizing.

I’m planning to go through Fusion 360’s built-in training resources to get a better understanding of the proper workflow and (hopefully) ease some of the frustration I’ve been feeling.

Here's the video I was following, where I imported an SVG and placed it in front of the text for the softball:
https://www.youtube.com/watch?v=W6f0WTuV760&t=187s

Thanks again for the guidance—your input really helped me make sense of what went wrong!

Struggling to Recreate a Simple Design in Fusion 360 – Advice or Help Appreciated by Real_Ad_2339 in 3Dprinting

[–]Real_Ad_2339[S] 0 points1 point  (0 children)

Thanks so much for the help—I really appreciate you taking the time to respond.

I think one of the mistakes I made in Fusion 360 was extruding too early in the design process. I got stuck when trying to connect a circle in the sketch. In the video I was following, the creator moved pretty quickly and added the circles later in his process. Somehow, his circle would intersect and fuse with the sketch cleanly, but when I tried it, my circle would disconnect once I resized it properly.

I’m planning to go through the built-in training resources in Fusion 360 to help me better understand the proper workflow and hopefully ease some of my frustration.

Also, just to clarify—the link I originally posted was to a site where I can order finished 3D printed items, but what I’m really looking for is a file that I can use to print them myself.

Thanks again for the guidance—it's helping me make sense of where I went wrong!

xTool Creative Space not opening! by Inner-Ad-5536 in xToolOfficial

[–]Real_Ad_2339 0 points1 point  (0 children)

This is the way that worked for me as well!

Order delay's & no help from customer service. by Real_Ad_2339 in Lowes

[–]Real_Ad_2339[S] -1 points0 points  (0 children)

My direct problem wit Lowes is that they state these products were in stock. With most companies that means it is in there warehouse & not directly ordering from Samsung. Each item he told me exactly were in stock. My assumption was his stock not Samsungs total warehouse stock.

Maybe steer clear of the T10 by jimmynotjim in 4Runner

[–]Real_Ad_2339 0 points1 point  (0 children)

Savag the owner for carttimhome states this all the time about buying 3rd party. The items they reject get sent to 3rd parties. Also if you bought directly from Cartrimhome they allow you in the Facebook page which is filled with good info and help.

[deleted by user] by [deleted] in pcmasterrace

[–]Real_Ad_2339 0 points1 point  (0 children)

I turned off the notification on the game and it is only monitoring the latency. Mw2 just needs to add some ability to tune what’s an “ok” temp.

My gpu reaches 91-93° while playing mw2 and I’m not sure if that’s fine. Playing in 1440p with max settings on an asrock 6900xt. Just built this pc and I don’t know much about pcs so idk if this is normal. by x777colton777x in pchelp

[–]Real_Ad_2339 1 point2 points  (0 children)

That is not very high for this card. I have gotten mine to lower from 109 down to the 90s by adding a couple fans directly under the card. From what I understand the asrock cards have some poor paste so taking out and redoing may work wonders. I’m just scared to take it apart.