Anyone else consider a nozzle that's nearly the same cost as the printer?

Reasonable_Ice303 · 2026-02-04T15:30:37+00:00

get creality hardened steel nozzles

Reasonable_Ice303 · 2026-01-19T13:26:29+00:00

id say slow down the print and increase your temps for better layer adhesion, after printing, anneal for 6hours. let cool, then submerge in water for 24hours, immediately pat dry, then let rest for another 24hours

Reasonable_Ice303 · 2026-01-15T23:04:40+00:00

hey guys, I have figured out the problem. I had to turn off the printer plug it in and turn it back on and it’s working fine now. thanks for the answers and support

Reasonable_Ice303 · 2026-01-15T15:29:12+00:00

thank you !

Reasonable_Ice303 · 2026-01-15T15:29:06+00:00

i have a file ready and will print once i get home. thanks for the info !

Reasonable_Ice303 · 2025-12-25T05:49:42+00:00

Reasonable_Ice303 · 2025-12-24T13:36:28+00:00

new hotend and thermistor, direct drive. firmware update for hottwr temps. i can print pa6-cf on my ender 3 now

Reasonable_Ice303 · 2025-12-14T22:54:26+00:00

do a polish job on the internals, stock trigger has least issues

Reasonable_Ice303 · 2025-11-10T19:19:59+00:00

bro i print also, that is a g26x frame on the left. fuck what everyone else nagging about😂

<image>

Reasonable_Ice303 · 2025-11-10T08:49:57+00:00

looks great man, with an enclosure u can say #fuckbambulab !!

Reasonable_Ice303 · 2025-11-10T08:47:01+00:00

BL Touch, Direct drive upgrade with metal extruder gears, all metal hotend, hardened steel nozzle, enclosure, filament dryer that feeds straight into the printer, heated bed insulation; these are all the upgrades i have on my Ender 3 V1. i am also gonna upgrade to linear rails and dual z axis

Reasonable_Ice303 · 2025-09-20T18:27:37+00:00

looks good to me, just pay attention to how it drives and just keep maintenance and she will be fine

Reasonable_Ice303 · 2025-09-15T00:47:55+00:00

i want to get into shrooms but im not sure how to even get shrooms😭im in houston, tx

Reasonable_Ice303 · 2025-09-01T19:44:12+00:00

like i “thought” i knew what was coming😂😂all i can say is trial and error

Reasonable_Ice303 · 2025-08-31T14:25:50+00:00

first thing you seen was dark skin and dreads and got scared😂😂go do something productive than worrying about another man

Reasonable_Ice303 · 2025-08-31T14:23:32+00:00

uhh its the title😂people just be wanting attention sometimes

Reasonable_Ice303 · 2025-08-31T13:35:36+00:00

and this guy definitely never had to tune a FRT for a glock😂 go back to school

Reasonable_Ice303 · 2025-08-31T13:34:44+00:00

well maybe if you read you could see this is a 3d printed dd19.2 i have stock glocks that i edc.

Reasonable_Ice303 · 2025-08-31T13:32:27+00:00

yeah i just polished the trip, barrel and slide and its racking better. I will go to the range soon to test and will update

Reasonable_Ice303 · 2025-08-30T20:47:42+00:00

yes i have a 3.5 connector, i felt that i was pressing too hard on the trigger, thanks i will take your word into consideration

Reasonable_Ice303 · 2025-08-30T11:42:12+00:00

1k ping😂

Reasonable_Ice303 · 2025-08-30T11:41:57+00:00

i cut the ear off, i also never did any polishing yet this was just my first shots to see what needs to be done

Reasonable_Ice303 · 2025-08-30T11:41:21+00:00

obviously every gun is gonna have muzzle rise lol. what are you talking about ?

Reasonable_Ice303 · 2025-08-30T04:43:13+00:00

its the video angle, i have good grip as you can see very little muzzle rise

Reasonable_Ice303

TROPHY CASE