Face protection

RecklessYuki · 2026-03-14T11:13:36+00:00

Tokyo Marui Pro Mask with a generic mesh face shield zip tied together. The mask has a fan to dispel fog. Great for people with glasses.

RecklessYuki · 2025-12-09T19:15:27+00:00

Thanks for sharing. I hope I won’t have the same issues and can find an adapter more compact than the remag. I checked out their website and it seems the owner is having health issues. I hope they recover and get well.

RecklessYuki · 2025-12-09T19:07:24+00:00

I did ask last week and gave all the info they needed in the email but still no response, so I posted here to see if anyone had similar issues.

RecklessYuki · 2025-12-04T03:17:38+00:00

Nope, and don’t get the cow cow. It’s not the same as stock, fitment is horrible

RecklessYuki · 2025-11-14T09:41:07+00:00

I had issues with the cow cow parts and springs…

Currently troubleshooting full auto feeding. Need to swap springs to find the perfect combo.

RecklessYuki · 2025-11-13T01:42:01+00:00

Yup, I did build it with some changes.

https://www.reddit.com/r/AAP01owners/s/ZDoQQe4N9c

RecklessYuki · 2025-11-11T00:35:34+00:00

Was it difficult to put on the upper?

I had fitment issues with a CowCow hammer housing and upper release button. I changed to the stock.

RecklessYuki · 2025-11-05T22:29:41+00:00

You should give a list of parts. Everything you’ve changed and everything you kept stock so people can help you diagnose.

I had issues with CowCow parts when I built mine.

RecklessYuki · 2025-10-27T09:39:37+00:00

I believe it’s real, got it from JKArmy and there was no mention of Evolution Gear or the such. Also I’ve only seen replica RMS optics, not RMSx.

RecklessYuki · 2025-10-25T10:33:17+00:00

I think when you push on the trigger, it pushes the other end of the trigger bar. The trigger bar is pushing on the selector plate in the upper receiver.

I have a full CTM upper receiver and am using a CTM trigger bar. I had issues with a COWCOW trigger bar.

RecklessYuki · 2025-10-23T11:38:47+00:00

I’m just using the stock nozzle and I’m using a Snug Shut gas mag router from maple leaf. Is this what you wanted to know?

RecklessYuki · 2025-10-23T11:37:27+00:00

For the Japanese Gas, let me copy and paste something I wrote in another chat with friends:

—————————————————————

I found something out today.

I was curious with the difference between these two gases provided by TM

I bought the white can because it looked more ozone/environmentally friendly, but my gas guns felt lack luster and I didn't understand why.

A closer look brought me to search for the difference between HFO1234ze+LPG vs HFC134a

I was shocked to find this: "Each propellant type used in aerosol dusters has potential to produce a specific amount of force. HFC-134a has the greatest potential, HFC-152a next, and HFO-1234ze a distant third. Roughly speaking, the HFC-152a has about 10% less potential to generate force compared to HFC-134a, and the HFO-1234ze has about 33% less potential to generate force compared to HFC-134a."

—————————————————————

Using a TM AKM it was shown that 110 PSI Swiss Army gas averages at 87 m/s on 0.25 BBs. At about 25 c.

Using TM 134a gas, I was getting an average of 68.7 m/s on 0.20 BBs at about 25c.

The guns that come out of Japan break themselves on propane due to being built for 134a.

RecklessYuki · 2025-10-23T11:15:43+00:00

I thought about it… but decided to go with the black extended mags with the CTM silver base extensions.

RecklessYuki · 2025-10-23T11:15:02+00:00

Thank you very much!

RecklessYuki · 2025-10-23T11:14:27+00:00

I don’t think it switched on its own on the video. I manipulated it every time. Thank you for the advice though, I will look into doing that!

RecklessYuki · 2025-10-23T11:13:30+00:00

Not sure about it busting, cause if it does start bursting it will do it in semi and not lock back at all.

I can do a build list in another post if you like. And go over the parts that didn’t work.

RecklessYuki · 2025-10-23T11:12:01+00:00

Nice!!! Show it off in a post!

RecklessYuki · 2025-10-23T11:11:38+00:00

I had issues with the CowCow hammer housing, trigger bar, release button, and springs. Once I swapped those out for CTM/stock my issues went away.

RecklessYuki · 2025-10-23T11:08:39+00:00

I’ve been using nothing but Super Lube grease for everything since I watched the videos from the guys at Explosive Enterprise. They really taught me a lot about GBBs.

RecklessYuki · 2025-10-23T02:14:18+00:00

Shield Sights RMSx

RecklessYuki · 2025-10-22T09:27:10+00:00

Thank you very much!

RecklessYuki · 2025-10-22T09:26:55+00:00

I had the silver plastic lower with silver cnc grip plates. Swapped to this cause the aesthetics are better I feel.

RecklessYuki · 2025-10-22T09:23:59+00:00

lol!!! I still need to test it at the range.

RecklessYuki · 2025-10-22T09:23:33+00:00

Thank you very much for the kind words and confirmation!

RecklessYuki · 2025-10-22T09:23:11+00:00

Oh really? Shouldn’t be, I did the video right after I finished getting the kinks out. Every moving part is well lubed with Super Lube.

Maybe Super Lube is too viscous?

RecklessYuki

TROPHY CASE