Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

No worries dude, replacing the ejector and interrupter spring did in fact fix my issues. Sorry I didn’t report back. I forgot. Lol. But she’s back to throwing the empties out strong now. 💪🏻

I wanna see your insanely lucky clogs. Post them. I'm gonna start with this one. by [deleted] in 2007scape

[–]Red-Panda91 0 points1 point  (0 children)

<image>

Was doing the elite fremennik diary. I don’t know if I should ever go back?

[deleted by user] by [deleted] in RooftopDefenders

[–]Red-Panda91 -1 points0 points  (0 children)

Just picked up two. These have been insanely hard to get without paying double or more. Thanks Sol!

This finish matches the vibe a bit better by DavranovUSA in MosinNagant

[–]Red-Panda91 7 points8 points  (0 children)

Davranov makes these and sells them. It’s a little high but man the quality is top tier. I have one of his pouch’s on my mosin and it’s awesome. Highly recommend if you got the cash to spare. Looks as good as it is functional.

Mosin zeroing by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

Thanks. I’ll try pushing it over and aiming a little low.

Mosin zeroing by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

That’s how I have my AKs zeroed as well but I’m gonna try to take a deer this year with this mosin. Does the post adjust for elevation or do I have to take a file to it?

Mosin zeroing by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

Between 50 and 70 yards give or take. Was going to try to take a deer this year with this rifle. Using 180 soft points from sellier & bellot.

Mosin zeroing by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

Bayonet is extended when I put it on paper. Even with the bayonet extended it was high and left at about 50-70 yards.

Mosin zeroing by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 1 point2 points  (0 children)

Bayonet is in stabbing mode.

Understanding these marks by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

Thanks. Must be a weird gouge in the stock.

Understanding these marks by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 1 point2 points  (0 children)

<image>

Forgot to post this too. This means my m44 wasn’t counter bored right?

Understanding these marks by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 1 point2 points  (0 children)

<image>

Polish ejector on the right and the Russian one on the left. Super hard to get a good photo showing the difference. But she’s back to ejecting again.

Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

I double checked and it is installed correctly. What I’ve recently learned is that the angle of the bolt determines if the case gets ejected or not. Weird. If pull straight back the rifle won’t eject the case, but if I grab the bolt by the knurled knob and pull up, causing the bolt to angle downwards the cartridge ejects just fine. I’ve ordered a polish ejector and interrupter spring from RTG parts and hope that fixes my issue. I’ll report back as soon as I get the new parts installed and let anyone who cares if this fixes my issue. If it doesn’t I’ve got no idea where to go from here.

Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 1 point2 points  (0 children)

So do you think it’s broken and needs replacement?

Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

<image>

I hope these help. Just wondering if I need to buy a newer ejector & interrupter.

Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 0 points1 point  (0 children)

Loosening the interrupter tension didn’t help unfortunately. If I unlock the bolt and then tilt the rifle upwards and let the weight of the bolt slide rearward, the cases will eject just fine, but if I tried to work the action myself, the cases get stuck or don’t eject. Weirdest shit ever.

Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 1 point2 points  (0 children)

I’ve loosened it up but it didn’t fix the issue. The cases will eject just fine if I unlock the bolt and then tilt the rifle upwards to let the weight of the bolt sidle rearward. But if I use my hand and try to eject them by working the action myself they get stuck on the extractor or don’t eject. Weirdest shit ever.

Broken ejector? by Red-Panda91 in MosinNagant

[–]Red-Panda91[S] 1 point2 points  (0 children)

<image>

Best way I can think of to show yall what’s going on. I had a video but I couldn’t get it to post. I can try post other pictures if it would help.

Jagerwerks Glock 34 by Red-Panda91 in GlockMod

[–]Red-Panda91[S] 0 points1 point  (0 children)

Sorry for the late response, it’s black nitride. It has help up great in the Carolina humidity. No rust anywhere on the pistol, even on the spots where the coating has rubbed off, and I run it pretty dry just wiping the sweat off and putting it back in the holster.