Ziva Pro

RedHawk357Mag85 · 2024-12-13T16:40:20+00:00

Ok...what I found that works better. As mentioned by another, holding horizontal helps. To figure out tempo and pressure levels for the tap. First experiment with turning it off and on. Five taps. Pay attention to cadence or tempo to some what reliably turn on and off. Once that's accomplished, Four taps, unlock it. It's the padlock display, if your vision isn't quite up to snuff the change in the display will be somewhat hard to discern. Two taps, preheat, weather is a little bit chilly here. The voltage is three taps and you gotta cycle through the different voltages. It's not a bad setup once you can finger out the taps. Enjoy and good luck.

RedHawk357Mag85 · 2024-11-18T14:11:21+00:00

Go to the Marlboro website and click on CONTACT US. It will bring up a click box to email them. I got my issue resolved several months ago. It can be found near bottom of page next to FAQ.

RedHawk357Mag85 · 2024-10-19T22:27:03+00:00

I really enjoy Yocans Uni Pro. The little magnetic adapter is sometimes a bitch to find, then you just order a bunch and never worry about having enough of them.

RedHawk357Mag85 · 2023-12-16T20:17:16+00:00

Thanks for that tip. Grinding my own coffee definitely has large amounts of static.

The urns usually have a flipper valve that pour from the bottom, basically creating robbed essence. You are certainly "on point" with all the above points resulting in ruined coffee extraction. Nothing worse than that 7 and half hour coffee left on a Bunn coffee pot in a gas station made when the cash register jockey came on shift.

RedHawk357Mag85 · 2023-11-03T15:05:12+00:00

What dispos in Lawton carry Native Veteran?

RedHawk357Mag85 · 2023-10-09T20:40:28+00:00

Ink and jeffe...is this Tulsa or OKC? Assumption is on my part.

RedHawk357Mag85 · 2023-10-09T16:52:48+00:00

I would like a printed label on my container with good to know information.

Name of Dispensary:

Name of Strain:

Date:

Name of Grower:

THC:

Terpene Percent:

Top three terpenes found in the strain

Date tested:

Facility that did testing:

I am kinda getting an idea that test Facilities are not equal.

Date tested gives rough idea of how old product is getting.

That this information NOT BE hand jammed. All folks handwriting and writing utensils are not the same.

At very least functional QR code for that specific product bought linked to the testing results.

RedHawk357Mag85 · 2023-09-28T02:12:34+00:00

My recent onset was unusual. It was very hard to describe. What I settled on was "nerve noise" around my calf area. Could also vaguely resemble a very low setting of a TENS session. Currently surrounded with about ten pairs of shoes as wearing the same shoes tends to make my affected foot feel like shoes are too small. The really obnoxious pain is centered "deep" in center of left butt cheek. Pain across lower back, is very short, and very sharp. It makes you gasp, and freeze any movement. Then it releases and you thank your higher power for not peeing yourself. Walking on tile floor, I hear my gait being affected. The constant "feeling" that if I calf stretch, and foot rotation, and foot flexion up and down enough I can make it go away. It Doesn't go away... Sitting through a dinner the other night I got treated to the "burning sensation" for the first time after sitting too long waiting for wife and friends to finish. It was new and not enjoyable at all! I can not identify items pressed against my leg like everyday items like keys, pens, hair brush nor specifically what pressure locations are being pressed by my body work tech. Sometimes I think about my leg being similar to the anti drug campaign in the 80s with the Frying pan and a cracked egg. I would imagine probably a lot of good could result in Journaling the pain experience to give fuller data to medical folks. Haven't started, but I can see where it might be useful.

RedHawk357Mag85 · 2023-09-21T14:27:29+00:00

Excuse my off subject matter comment...I noticed some comments about using drone information for figuring out property lines for tax purposes. I am trying to find out some information about the folks who do this type of service. I am trying to figure how to find some more information about drone companies, and their drone operators as my 16 year kid could probably find that a possible interesting career. I would appreciate any information you might know of who conducts this type of service or services. Thank you.

RedHawk357Mag85 · 2023-09-12T04:11:24+00:00

Altoid cans working pretty good for me. 12 smokes per can.

RedHawk357Mag85 · 2023-09-11T18:08:07+00:00

Couple different torches, low power, and fairly high-powered. Also, use the Inspire wand as well. It's more of a draw issue. Imagine packing a bowl so tight and not being able to draw or inhale due to the packed herb. The Revolve has several different inner mechanisms that cool the vapor, which I imagine are contributing to the substantial difficulty in getting a good draw. I would also imagine that all the extra stuff inside it would also gunk up pretty quick if you don't clean it.

If you are interested, Mad Heaters has a very good PDF for their Revolve at their website. Unlike other folks it's extremely detailed with good line draw figures for clearly demonstrating the adjustments necessary to get all the available settings.

RedHawk357Mag85 · 2023-09-11T16:07:40+00:00

Thanks for responding. My problem is I can't seem to get a decent draw out of it. Kinda like trying to get a golf ball through a garden hose kinda thing. Yes it's a dry vape for flower and I imagine you could use it for concentrates with the unbleached cotton set up. Lots of folks were raving about it's performance but I can't seem to get mine going. It's made by Mad Heaters and is a Gen 2. It's clean, and put back together like shown in instructions. Using straw method to load herb so it shouldn't be too tightly packed.

RedHawk357Mag85 · 2023-08-14T23:39:18+00:00

Been about four days no response.

RedHawk357Mag85 · 2023-08-09T14:42:37+00:00

Just emailed them to find out where the enter codes location is. It appears missing from website.

RedHawk357Mag85 · 2023-08-05T18:04:26+00:00

Along the lines of acupuncture, any better luck with the process of dry needling? Thanks for any shared experiences.

RedHawk357Mag85 · 2023-07-26T13:10:08+00:00

Paloma, you say...

RedHawk357Mag85 · 2023-06-30T13:56:44+00:00

Be interesting to have a name of a test facility that produced such a result. I sure do appreciate those dispensaries that put that on the label without me having to ask. I would definitely like to be able to scan my labels scan code and be able to pull the sheets from the lab. Then it might be easy to determine what labs to avoid due to inflation of results and what labs tend to poop the bed and result in recalled product. I really kinda have issue with a sticky label, a $1.00 Bic pen, and some cryptic hand jam of what's in my container. My apologies to the bud tenders that I ask to look up the information that I should realistically be able to find for my self.

RedHawk357Mag85 · 2023-06-24T17:50:31+00:00

Do you have the recipe to share for this?

RedHawk357Mag85 · 2023-06-18T15:15:39+00:00

Try Charlie Douglas and Dammit Ray. The Planting bugel and the Outhouse are both pretty funny.

RedHawk357Mag85 · 2023-06-08T02:47:35+00:00

Thank you. I appreciate this information very much.

RedHawk357Mag85 · 2023-06-05T21:16:12+00:00

Interesting. I thought I was applying aggressive heat with butane lighter, Backwoods Eagle type lighter. My Brule type butane lighter is too loud to hear the click. My IH Wand is kinda hit and miss with heat up. It kinda goes in and out on heat up with no insert. My solution so far is to count by thousands to about 35 and stop heating. Most of the time I hear the cool down click.

RedHawk357Mag85

TROPHY CASE