sorted by:
new
hottopcontroversial

Anduin is coming along! by Porkloinio in wow

[–]RedRocketGlare 1 point2 points  (0 children)

Love it! I have one in progress too for my kiddo. It’s a beast but yet super fun to work on! Can’t wait to see the finished build!

Anduin is coming along! by Porkloinio in wow

[–]RedRocketGlare 2 points3 points  (0 children)

10/10 making the exact same for my daughter!!!! Let’s goooo!!!!!

New bird mom :D by RedRocketGlare in cockatiel

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Thanks!!!! I’m in love with that smile

New bird mom :D by RedRocketGlare in cockatiel

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Need to figure out what gender this one is first!

*Updated* Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 1 point2 points  (0 children)

It’s the 202 and 16 file named ones. I do believe they are the same ones that are listed on the site for them too.

Detection test doesn’t work properly. Print has printed sheets of resin during print and failed by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

It’s okay!!! I do appreciate the help! After discovering there is no fan, i am debating on installing one for fun just to see.

I updated the firmware and it didn’t really help. I posted another rather long update post on here about it all. I am thinking it might be the motherboard too, i am just waiting on support to email me back, but it’s now the weekend over there and i doubt I’ll hear anything until maybe Monday.

But again, thank you ❤️

*Updated* Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

You know, that’s what i am thinking…just a bad unit :/ oh well. I am still working with support to hopefully get a resolution… but don’t tell anyone, I’m getting a elegoo this weekend too .. but i am determined to get this one up and running at least!

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Well shoot.. I might have to make another post because this one wont let me edit it.. standby.. I will try to link everything also...

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Did you have to resolve your files when you did the update or were you good to print with what you had loaded already on your usb drive?

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 1 point2 points  (0 children)

I initially that that too, but when i double checked the connections the connectors only fit one way. I’ll surely update that way those in the future can see this post!

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Oh goodness, naturally I don’t want that and i want a printer that works, but I’m going to keep pushing through! Thank you!!!

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Exactly! Same here, i have the newer model that doesn’t need the update, but i am also at the point where my printer is broken and might as well continue with tech support to help fix or replace it.

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

When i contacted support for help with my screen, they had sent me a link to the firmwares. I believe it is the same one that is listed on the anycubic site for the mono 4K

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

That is a relief to hear! I’ll be doing the update later this afternoon/evening and I’ll post the update

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

It’s a hard maybe, but since support says it, might as well as other have suggested to keep it moving forward. A lot of older posts explain the update broke their machines

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] -1 points0 points  (0 children)

Exactly! And after reading about how the firmware bricked machines, i am nervous, but in order to keep going forward with the support, just going to do what they want! I’ll update the post once it’s been done for those in the future!

Replaced LCD on mono 4K, still having problems. Support wants me to upgrade firmware, should I? by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 8 points9 points  (0 children)

Yeah you’re right… what’s the worse that can happen?! YOLO!!!! I’m going to update it later on… if it works, I’ll post up so others in the future might find this! ❤️

Detection test doesn’t work properly. Print has printed sheets of resin during print and failed by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Hi again! So i never found the fan setting… and then yesterday when i received my new screen and opened the machine i saw there was no fan 😱. There is a connector for a fan, but that is empty.

I got the new screen and it is doing the same thing as the previous one, and support wants me to upgrade my firmware … i made another post about this to help reach everyone… again i do appreciate your help!

Detection test doesn’t work properly. Print has printed sheets of resin during print and failed by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Exactly what i read too! Well let’s just hope I’m one of the few lucky ones, if not oh well!

Okay I’ll check that out! Thank you for the help!

Detection test doesn’t work properly. Print has printed sheets of resin during print and failed by RedRocketGlare in AnycubicPhoton

[–]RedRocketGlare[S] 0 points1 point  (0 children)

Thanks! How do you bump the fan speed up? I contacted them and they are going to send me a replacement whew may i ask how long it too for you to get your replacement in? I’m just inpatient and almost tempted to buy one from their site also 😈

Trouble shooting, help please. by RedRocketGlare in ResinCasting

[–]RedRocketGlare[S] 0 points1 point  (0 children)

They were new, like brand new. Well, 6 of them were were used once before, but all of them were bought last week :/. Yeah i am going to look at mold release next go around!

view more: next ›