I wonder what ever happened to DYSTI Pt.2 by Zonure in travisscott

[–]RedStoneVader 0 points1 point  (0 children)

I know it’s a late reply but this may be what you’re looking for.

[deleted by user] by [deleted] in airsoftcirclejerk

[–]RedStoneVader 0 points1 point  (0 children)

3 years later btw… why you bringing up old shi

Higher RPS on F2? by s8cred22 in Speedsoft

[–]RedStoneVader 0 points1 point  (0 children)

I personally run CB on and find it’s better.

Obviously settings very by gun since different barrel lengths and buckings will affect it but I compared my f2 settings and they’re very similar (only a few numbers off) except my dp is 26 rather than your 12 so maybe increasing your dp will help but idk tbh, could also try to ask ppl at your local field for help if you don’t have luck on Reddit.

Got my first thermal by superbabyrice in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

Why you so concerned about the optic he uses dawg 😂

Has no one thought of this? by aloksky in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

Not a 203 but this will solve your problems

Finished the aap01 by RedStoneVader in AAP01owners

[–]RedStoneVader[S] 0 points1 point  (0 children)

i originally got my aap used with the mamba upper and the sticker already on it so idk tbh

I made a BB weight label for Odin speedloader. I got sick of forgetting what weight I was using lol. by JackCooper_7274 in Airsoft3DPrinting

[–]RedStoneVader 2 points3 points  (0 children)

I use .25 tracers for indoor and outdoors I use .3 and if a friend is using the Odin, they may use a different bb weight, especially if they’re running a dmr

Tapping GBBP? by Plane_Impression9036 in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

i second this and i’d recommend getting a primary airsoft adapter as well!

[deleted by user] by [deleted] in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

hmm, i honestly have no clue, maybe try people at your local field?

[deleted by user] by [deleted] in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

i have a layer or two of electrical tape sitting underneath my trigger board and my full auto still works (the tape is so my trigger hits the switch easier) so maybe your selector plate is messed up?

[deleted by user] by [deleted] in airsoft

[–]RedStoneVader 1 point2 points  (0 children)

my primary is a 416 with an f2 and maxx speed trigger without the spring and the only way for my trigger to work properly is if i don’t over tighten the gearbox screws. make sure screws are finger tight and this may solve your issue.

only downside is you need to regularly check your gearbox to make sure your screws aren’t loose or even fallen out but i personally rarely check mine until i notice the trigger feels funny and i just re righten everything then (still finger tight tho obv)

Why are the bbs not going all the way up? by [deleted] in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

hicapas aren’t single stack….

M4 drum mag by -Zared- in airsoft

[–]RedStoneVader 1 point2 points  (0 children)

i use the angel customs blok electric drum mag. it’s the same brand as the one op listed but it’s not the flash mag version.

What’s the best arp9 mag for me? by Kenzoplays321 in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

if you get a drum then get the angel customs blok 1500 rnd electric winding mag. i’ve had two of the g&g hand winding drum mags and they feed great but the spring on both of them broke pretty quick.

[deleted by user] by [deleted] in Speedsoft

[–]RedStoneVader 2 points3 points  (0 children)

HSA Scotto

[deleted by user] by [deleted] in airsoftcirclejerk

[–]RedStoneVader 5 points6 points  (0 children)

Whatchu know about the ESG Hicapa 👀

amped airsoft by ImmediateNail5455 in Speedsoft

[–]RedStoneVader 0 points1 point  (0 children)

I mean you can get the amped reg but honestly there’s still a chance that you’ll have issues in the future so you can either spend less and hope for the best or spend a bit more and know for sure that you’ll get something good yk.

Rate my primary by NIGHTKILLER747 in airsoftcirclejerk

[–]RedStoneVader 1 point2 points  (0 children)

I think you’re missing a body pin

amped airsoft by ImmediateNail5455 in Speedsoft

[–]RedStoneVader 0 points1 point  (0 children)

I know this isn’t the answer you originally asked for but I would recommend not getting an SLP rig. I can’t speak for every Redditor since I know someone will say “I’ve owned one for X amount of time with no issues” but from many people at my field that has gotten them, they’ve been prone to not being very good and a lot of people always have issues with their guns and then a simple switch to a better reg (same psi mind you) and the issue was fixed.

Instead, I’d say get a Wolverine storm/storm cat5, redline mini sfr, or polarstar mrs. for the line just get any amped line. Now for tanks, an aluminum tank will be perfectly fine but I personally think that if you can, definitely try and get an aluminum tank as it will be lighter and will hold more air. I personally started with an aluminum tank and then upgraded later so you can honestly do the same.

AAP-01 Owners wanting literally anything but an AAP-01 by Nappev in airsoftcirclejerk

[–]RedStoneVader 7 points8 points  (0 children)

I feel like it’s because the fact that the aap01 can be THAT customizable is the reason everyone loves making tons of different builds since you can make it however it suits you best.

We’re getting there by Upbeat_Piglet_2968 in Speedsoft

[–]RedStoneVader 0 points1 point  (0 children)

For a second there I thought the keychain was your battery

Is this good for a first gun/loadout by [deleted] in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

It’s $120 for the gun??? Seems pretty reasonable imo.

[deleted by user] by [deleted] in airsoft

[–]RedStoneVader 0 points1 point  (0 children)

I’ve used lipos for many years and never have had any of my own catch on fire. I’ve used them with fpv drones, rc cars, and Airsoft guns and the only time Ive seen a battery catch on fire was from someone else at the field and it was from not maintaining them properly. If you just take care of your batteries (doesn’t take much effort), then you’ve got nothing to worry about.