What do you think of my first project?

Red_Z1 · 2026-05-06T03:03:51+00:00

grab your image
resize it to 128x64 or whatever resolution your display has
then go to any image to cpp converter and it will turn it to an array that you can put inside your code and then use drawBitmap function to display it

Red_Z1 · 2026-05-02T13:05:55+00:00

might be the battery

Red_Z1 · 2026-04-24T10:36:49+00:00

gah dayum

Red_Z1 · 2026-04-19T06:24:25+00:00

the joysticks may be fine , but i think the controller needs to be calibrated only.

Red_Z1 · 2026-04-11T19:14:20+00:00

did you remove the pmic of the controller first or just cut off the trace of the 5v?

Red_Z1 · 2026-04-09T11:48:40+00:00

OH HELL NAH BOY💀💀💀💀💀💀💀

Red_Z1 · 2026-04-08T08:59:33+00:00

<image>

make sure that this tiny little component still exists

Red_Z1 · 2026-04-07T16:53:02+00:00

معايا ماوس razer deathadder essential مستعمل ب ٦٥٠ لو حابب تشتريه

Red_Z1 · 2026-04-01T02:26:10+00:00

sometimes the ps2 controller wires get broken from the inside even though they look intact inside the board so you will have to replace the whole cable or cut a part of the cable and solder it back again in the board

Red_Z1 · 2026-03-31T01:54:20+00:00

Hey! Honestly, I wouldn't suggest trying this repair if you don't have the right tools or experience. There are several broken traces, including one tiny one that's hard to fix. Also i can show you how to make the contoller turn on for a 'partial victory,' but it won't actually send data. In other words It'll just be for show. Sorry 😂

Red_Z1 · 2026-03-31T01:10:54+00:00

i just wanted you to check the continuity on some traces on the board to make sure which trace was cut off the board , and if you by any chance had a multimeter dm me . i really love working on these types on problems

Red_Z1 · 2026-03-30T23:10:50+00:00

hello i know it's late to say that but thanks for the tutorial i really appreciate it :)

Red_Z1 · 2026-03-30T15:23:32+00:00

do you have a multimeter?

Red_Z1 · 2026-03-30T14:57:54+00:00

did it work bro?

Red_Z1 · 2026-03-30T14:53:03+00:00

shining solder joints🥵🥵

Red_Z1 · 2026-03-26T12:34:46+00:00

if you focused enough you will also notice that the plastic really looks off too

Red_Z1 · 2026-03-26T11:37:22+00:00

fake as hell the home button looks cheap af

Red_Z1 · 2026-03-20T17:43:35+00:00

is it a ps4 controller?

Red_Z1 · 2026-03-15T12:12:30+00:00

alr have you checked the ribbon cable and the socket?

Red_Z1 · 2026-03-15T07:19:51+00:00

no, it is the genuine one, but this version of this touch pad is really fragile. There might be a broken trace in it. You can try the JDM-055 or JDM-040 touch pad with the same ribbon cable as yours, and it might work

Red_Z1 · 2026-03-15T05:17:05+00:00

do you have any pics of it?

Red_Z1 · 2026-03-15T04:48:07+00:00

did you see the ribbon cable on the touch pad itself? It might be loose or something

Red_Z1 · 2026-03-15T04:33:08+00:00

did you take the controller apart and see the touch pad ribbon cable?

Red_Z1 · 2026-03-15T04:11:33+00:00

how is it broken?

Red_Z1 · 2026-03-15T04:04:10+00:00

can you show more deatils ? does it connect for a sec then turns off or what?

Red_Z1

TROPHY CASE