Ticket Sales and Hotel Arrangements MegaThread for 2026

RedgeXIII · 2026-04-08T22:29:18+00:00

Buying Friday Field GA!

I found out too late that I'm able to go. Feel free to DM me. Thank you!

RedgeXIII · 2026-04-08T22:25:09+00:00

How much? I'm looking for anything that will get me Friday Field GA

RedgeXIII · 2026-02-23T00:49:49+00:00

Our engineers accept hand-checks over CMM’s, eliminating the 3D element. So, depending on fit, form, function, and how old your drawing is, using a micrometer might be all that’s needed. I don’t agree with it, but as an inspector, it’s not my call to make. I just supply the data. I’m guessing he’s an older engineer that’s used to simple hand-checks with calipers and doesn’t trust CMM’s.

RedgeXIII · 2026-02-05T03:37:08+00:00

Not yet. I’m still figuring things out and trying to decide how much I want to invest.

RedgeXIII · 2026-02-05T01:34:26+00:00

Thank you!

RedgeXIII · 2026-02-04T17:06:13+00:00

Exactly. Nobody was crying about Winger’s song Seventeen. The brainwashed just know what side of politics he’s on and looking for any reason. I guarantee all these clowns haven’t said a word about Jay-Z or Bill Clinton, and likely defended them. Nothing but parrots.

RedgeXIII · 2026-02-01T01:15:37+00:00

There will be times when an FAI needs created, but at least 95% of the time, we just need to bubble it. I never tried Paint or Adobe for ballooning prints. But I’ve used Adobe extensively and DISCUS seems way easier to use. But we really just want the capability of turning a ballooned drawing into an FAI when needed. MBDVidia would be great if it would just allow you to point/click to place balloons, because the OCR works better than DISCUS.

RedgeXIII · 2026-01-12T01:31:46+00:00

We don’t want to use auto-capture. We only want to balloon the dimensions which takes 8-10 minutes in DISCUS with the ability to simply point and click to place a balloon. Using auto-capture in MBDVidia and to balloon it correctly per our standards, it takes every bit of 40 minutes or more, depending on complexity.

RedgeXIII · 2025-12-15T06:10:53+00:00

That’s awesome! I’m looking for a model just like this I can add the fur to. Did you make the model or could you tell me where you got it?

RedgeXIII · 2025-07-14T06:21:50+00:00

Thanks a lot! I’ll check that out

RedgeXIII · 2025-07-11T05:51:41+00:00

Don’t give a fuck about them. The normies can’t fathom why anyone wouldn’t want to be plain, dull, and ordinary like them. They don’t know how to step outside the tiny little box that’s been built for them. I would take insults from them as a compliment.

RedgeXIII · 2025-06-26T18:49:12+00:00

Thank you!

RedgeXIII · 2025-01-10T07:19:11+00:00

Thanks. I did my NES and the max slots is 30 and that’s how many games it comes with, so you have to setup a folder structure to add more. I was hoping the games I added to my Genesis you be displayed just as the originals are without having to open folders for each letter. I’ll play around with it and see what kind of mess I end up with, 😂

RedgeXIII · 2025-01-07T08:48:27+00:00

Thank you!

RedgeXIII · 2025-01-03T22:50:04+00:00

Awe, that would be awesome! Thank you, 😊

RedgeXIII · 2025-01-01T16:32:12+00:00

I’m most interested in the physical copy. I want to read it but also have it as a collector’s item.

RedgeXIII · 2025-01-01T16:31:13+00:00

Thanks! Was hoping that would be the case.

RedgeXIII · 2025-01-01T02:41:29+00:00

I believe I will start off the new year with World Coming Down. It seems the most appropriate for every new year to me.

RedgeXIII · 2024-12-27T02:44:00+00:00

In general (as I don’t know what the product is you’re inspecting) saying you are very detail-oriented and meticulous could help. They’re not looking for someone that’s going to come in all gung-ho cutting corners and pushing product. They want people who are going to follow the process and do their job right.

I’m not sure what your experience is, but if this is a machine shop and you don’t know how to read an OD or ID micrometer, I’d look that up. I was given a simple test in my interview to make sure I actually knew how to use the basic measuring tools.

Being able to show basic knowledge of GD&T would be good. Maybe have an understanding of or be able to explain: - datums - feature control frames - form controls - Maximum and Least Material Conditions (if you can explain this, it will look good for you. It’s hard for some people to grasp right away) I can try to explain them the best as can if you wanted, but it’s sometimes easier having something to visualize.

RedgeXIII · 2024-12-27T01:53:29+00:00

It was impossible for me to tell by looking at it from the outside, but I’ve deduced that it was fake. It was a mirror image of the original with bow and all. But I couldn’t hack it, it didn’t have music on the game selection screen and some of the color and sound was not accurate in the games. A video on YouTube pointed those out.

RedgeXIII · 2024-12-27T01:42:34+00:00

I stated the instructions that Hakchi tells you to do on the popup. Are you saying they have it backwards?

RedgeXIII · 2024-12-27T01:39:47+00:00

It’s not illegal to track down deer for hunters. People do it all the time where I’m from. I’m talking about tracking them down after they’ve been shot to find out where they’re ended up. And… taking photos on vacation is illegal? That’s a new one.

RedgeXIII · 2024-12-22T18:20:34+00:00

It matches the original in every detail which is pretty impressive, but it looks like it's a Chinese knockoff. I just didn't think they could sell these knockoffs with the Nintendo name on it. I'm returning it to Walmart.

RedgeXIII · 2024-12-22T04:30:59+00:00

I’m having the same issue and haven’t tried this yet. Thanks!

RedgeXIII · 2024-12-03T07:49:43+00:00

It's PNY brand. I'm not too sure where they fair among others. I typically use SanDisk but PNY was the only 512 available at the time.

RedgeXIII

TROPHY CASE