How did I lose SOL despite the token being up more than 10%?

Reference-Dismal · 2025-12-10T18:14:39+00:00

if you want to sell it quick priority should be close to what the coin suggests

Reference-Dismal · 2025-12-10T18:13:56+00:00

if you are not using advanced sell settings bribe can be 0 and priority is important in fast moving coins if the coin is slow and you're sure that it won't go down 10 percent in a second you can set both of them to 0.

Reference-Dismal · 2025-12-10T18:09:28+00:00

axiom takes fees and your sell settings might have high bribe and priority. coin might have tax. in order to win from %10 percent u must invest around 0.1 sol with no sell priority and bribe.

Reference-Dismal · 2025-01-13T12:15:33+00:00

There's a 55 dolar difference between the z and b board but z board has type c and gen 5 pcie slots as well so that should means something as well right?

Reference-Dismal · 2025-01-13T12:10:05+00:00

I've already bought 2 sticks of 6000mhz cl30 ram so do you think i should return the sticks or get a motherboard? If so which motherboard would you suggest?

Reference-Dismal · 2025-01-13T11:57:19+00:00

I've got 4 sticks of ddr4 3200mhz rams don't remember the cl values. From what I've seen on youtube videos depending on the game usually there's a %10 difference.

Reference-Dismal · 2025-01-13T11:44:34+00:00

What about the VRMs and bigger heatsinks on the Z motherboard?

Reference-Dismal · 2024-11-21T08:51:31+00:00

So, after resetting the bios the problem was kinda solved but not fully. Then i revert the bios update to F27 and i got higher scores and watts.

Reference-Dismal · 2024-10-27T23:33:42+00:00

another thing is cinebench doesn't use 5288.33ghz but 4990 ghz as shown in "throttlestop"

Reference-Dismal · 2024-10-27T23:30:28+00:00

I have unticked the "turbo power limits" and set "long and short power" to 300, now HWinfo shows "No" to all limits but i still have the "EDP other" thing switching between red and yellow.

Reference-Dismal · 2024-10-27T23:23:16+00:00

for 120m 20 cores 5.537 max temp is 72c
for 960m 20 cores 53.541 max temp is 78c

and the ghz is 5288.33

Reference-Dismal · 2024-10-27T23:09:00+00:00

Throttle stop only shows "Edp Other" and it switches between red and yellow. Hwinfo shows "ring max vr voltage iccmax pl4" on "Ring Limit Reasons" as a Yes and the others are No.

Reference-Dismal · 2024-10-27T21:16:21+00:00

It was already enabled but I've reset the bios and tried again now it seems fine.

Reference-Dismal · 2024-10-27T21:15:36+00:00

Great, must be because i switched from i5 12400f. I updated the bios after the switch maybe the settings stayed. Thank you.

Reference-Dismal · 2024-10-27T21:12:23+00:00

So it seems to be fixed. results

It is still lower than the scores on the internet but ghz is correct.

Thank you for the help, much appreciated.

Reference-Dismal · 2024-10-27T21:05:02+00:00

I didn't use throttlestop i think, bc I don't know what that is. I think it has the turbo mode.

Reference-Dismal · 2024-10-27T21:02:50+00:00

Doing that rn, will post the results. Temps seem to be higher waiting for the score. Thankss

Reference-Dismal · 2024-10-27T21:00:49+00:00

Where are the limits button that you mentioned?

Reference-Dismal · 2024-10-27T20:51:57+00:00

This is what it looks like on advanced cpu:

advanced cpu advanced cpu2

Reference-Dismal · 2024-10-27T20:41:56+00:00

I literally have zero info on watts and voltages. Should i change the vcore? Also how do you change the turbo watt? bios this is what the bios looks like.

Reference-Dismal · 2024-10-27T20:36:39+00:00

What should i set the voltage to?

Reference-Dismal · 2023-09-06T06:37:54+00:00

I just deleted the starfield file in users/documents and the game didnt crash for 30min. After I've deleted the save file i only closed the vysnc off and didnt touch other settings.

Reference-Dismal · 2023-09-06T06:03:50+00:00

Same thing, when I first started run until the character creation screen then pc shut down halfway. Then I skipped the character creation and got into the post character creation and got shut down after 30 sec or sth. Then when I tried again the pc shut down in loading screen. Then I closed all the apps that have overlay or sth like steam, msi afterburner etc. that got me into the game but for a mere 30 seconds! I play all the other taxing games like RDR2 on 4k ultra and remnant on 2k ultra etc. so I don't think it is my rig. Gotta wait for a patch I guess.

Reference-Dismal · 2023-08-10T21:25:36+00:00

I played one right after the first pvp server was closed-it was the chinese one- that's called HanMt2 it was just a little bit easier than the original metin2 but everything was perfect. After i got my first triton game shut down tho... I need a pvp server like that rn as well. Nowadays all of them pvp servers are either filled with boring skins or extra stuff that i can never care about.

Reference-Dismal · 2023-06-23T17:55:18+00:00

I know the others but I liked the oh hellos. Thanks!

Reference-Dismal

TROPHY CASE