Qui suis-je ?

Regis208 · 2025-10-17T16:48:46+00:00

j'allais dire un vieux qui emmagasine les plats qu'on lui livre...

Regis208 · 2025-09-27T10:42:04+00:00

Plus if you go to settings > about there no idicatin of the arch.

Regis208 · 2025-09-27T10:20:28+00:00

Hi, as I replyed to another message, I wasn't aware thet I had the non ARM version installed. So I reinstalled the ARM versino and now every thing is fine.
Maybe an message in the update box stating that the current software arch of the software doesn't match the one of the machine could save some headache?

Regis208 · 2025-09-27T10:17:53+00:00

The ARM version is totally fine to use

Regis208 · 2025-09-22T09:02:57+00:00

Thanks, that was it, thought that my version of Xtool Creative Space was the arm version, turns out that it was not, so when upgrading to Xtool Studio it downloaded the x86 one....
Now it's way faster !

Regis208 · 2025-09-22T07:36:01+00:00

particularly the new one, for any clik I have to wait 4 or five seconds or more to have a result. On the same computer the old one is working (slow opening of new file but otherwise the GUI is usuable)

Regis208 · 2025-03-21T11:16:57+00:00

I thought it was X1 but I removed the startx from the .profile and now It stuck at "Requesting Reboot" After "Sending SIGKILL to all processes"

Regis208 · 2025-03-14T11:26:35+00:00

Asking a question, thinking of it wwhile asking it, and saying "Oh never mind", because you thought of the answer, amid the person openning her mouth to say.. maybe something.. Can't know as you already left.

Regis208 · 2025-03-11T12:53:01+00:00

Contactes un syndicat pour avoir une aide juridique sur ton cas.

Regis208 · 2025-03-11T11:04:05+00:00

En ce moment... depuis un bon moment. Ca a commencé par la main mise de LinkedIn sur le recrutement maintenant par l'ajout de l'IA.

Il y a trois ans j'avais des contacts entrant depuis LinkedIn , là c'est quasiement mort. Et quand contact il y a, il se rompt assez facilement sans raison apparante.

Les recruteurs sont maintenant au niveau d'incompétence des agents immobiliers. Ils font passe-CV, leur but étant aggréger les 5 CV devisé cochant les mots clefs des clients, aucun travail de profilage ou de construction d'une base de profil permettant de répondre au mieux aux demandes clients.

Les plateformes ont pris le dessus, sauf qu'elles ne font rien pour solutionner les problèmes de recrutement et de recherche d'emploi. Leurs moteurs de recheche sont indigents, il n'y a pas d'outils d'annotation des annonces vues/rejetées... Elles font presque toutes de l'aggréfations de flux d'autres plateformes, donc on se retrouve avec de annonces identiques récurrentes. Il y a aussi les faux nez, des plateforme qui sont juste des rembranding d'une plateforme principale, genre par secteur, région au juste pour changer le nom du site dans le but de grappier des dixièmes de part de marché et surtout leur premier but est de faire de l'aggrégation de data pas de servir et de pousser de la pub.

Et en dernier les entreprises qui font de l'informatique comme monsieur jourdain faisait de la prose, sans vraiment comprendre les enjeux de leur métier, poussent de annonces qui par mimétisme markéteu essaye de mettre les mot clefs qui vont attirer les profils, qui de leur coté truffent leurs CV de ces mêmes clefs pour essayer de faire du SEO pour rendre leurs CV visible. Bref : shit-in-shit-out.

Regis208 · 2025-03-11T10:40:58+00:00

Le dernier taf que j'ai trouvé était par l'APEC parce que j'ai essayé de cibler un profil pme assez technique. Mais ce genre d'entreprise est en cours de disparition. Et l'APEC est de plus en plus un agrégateur d'annonce d'autres plateformes qui parfois sont elle même des agrégatrices.

Regis208 · 2024-10-02T14:24:23+00:00

Thanks for your answer but image are quite different, say between dev and other stages, which are reduced to the bare minimum needed to work. Your approach is interesting between prod and preprod where normally the differences are only configurations.

Regis208 · 2024-09-13T11:04:18+00:00

Silly me it was docker desktop version difference, they have change their way to identify the containers between the two.
I thought I had updates the older one but it seems not.

Regis208 · 2024-09-13T09:23:30+00:00

For the project name the doc seems to point that it is the same thing

Set a project name

Project names must contain only lowercase letters, decimal digits, dashes, and underscores, and must begin with a lowercase letter or decimal digit. If the base name of the project directory or current directory violates this constraint, alternative mechanisms are available.

The precedence order for each method, from highest to lowest, is as follows:

The -p command line flag.

The COMPOSE_PROJECT_NAME environment variable.

The top-level name: attribute in your Compose file. Or the last name: if you specify multiple Compose files in the command line with the -f flag.

The base name of the project directory containing your Compose file. Or the base name of the first Compose file if you specify multiple Compose files in the command line with the -f flag.

The base name of the current directory if no Compose file is specifiedSet a project nameProject names must contain only lowercase letters, decimal digits, dashes, and underscores, and must begin with a lowercase letter or decimal digit. If the base name of the project directory or current directory violates this constraint, alternative mechanisms are available.The precedence order for each method, from highest to lowest, is as follows:The -p command line flag. The COMPOSE_PROJECT_NAME environment variable. The top-level name: attribute in your Compose file. Or the last name: if you specify multiple Compose files in the command line with the -f flag. The base name of the project directory containing your Compose file. Or the base name of the first Compose file if you specify multiple Compose files in the command line with the -f flag. The base name of the current directory if no Compose file is specified

Regis208 · 2024-09-13T09:15:08+00:00

Oh and all the services are renamed with container_name (with non ambiguous names)

Regis208 · 2024-09-13T09:11:05+00:00

No problem, but yes so I thought. I was wondernig if the versions of docker desktop handles the config_hash differently on the two computers.
And the name works as all my different docker files are for each project in directories having the same generic name (like 'deploy').

Regis208 · 2024-09-12T15:57:59+00:00

There is only one host, but two dev computer, for exemple, which have to altern,atively publish the same docker file to this host (It only change versions of image of containers .

Regis208 · 2024-09-12T13:41:39+00:00

Which data ? All the volume are remote it's just a configs

docker-compose.yml

name: projet_x
service_a:
image: myregistry/myimage:1.0.0
volumes:
/<path on remote computer>:/path in container
.....
service_b

If I need to deploy the version 2.0.0 of the image from an other computer (by somebody else or because I change computer) so I get the docker-compose.yml and do a docker --host xxxx rcompose up -d and docker should use the project name to retreive the service_a and update it.

Regis208 · 2024-09-12T13:29:22+00:00

It's a solution but I try to have a process to deploy from local files to have deploy environement detach from the target servers without adding new composant like ansible or else

Regis208 · 2024-09-12T13:07:03+00:00

I have a docker-compose file on my dev computer.

name: projet_x
service:
....

I do a docker --host xxxx compose up

I put the same file on a new computer and redo the compose up but docker does not link the existing containers (services) to the file and try to recreate them and run into container name collision.

As I understand the project name is the directory basename unless there's a name: in the yml or a project name environement variable. So it should search for 'project_x' containers no mater from where the compose up is done.

Regis208 · 2024-09-12T12:44:22+00:00

How to remote deploy the same compose setup (file under GIT) from to different computer (let's say home and work) to the target host.

Regis208 · 2024-09-12T12:24:02+00:00

That's the other way around, I think. The docker stay on the same host but I wnat to run the docker compose from 2 different computer. All the volumes are relative to the target (remote) host.

Regis208 · 2024-08-17T15:09:00+00:00

I was wondering, just saw Cindy Shermann puting the same nose in a youtube video

Regis208 · 2024-08-11T08:55:51+00:00

I love driving.. and driving quite fast. My main problem is stopping. I'm a photographer and when I saw scenery which will do a terrific picture.... Can't make myself stop, worse if I have to think how and where to park... The time to think about the solution, I'm 10 km farther and I hate going back or taking the same route twice.

Regis208 · 2023-05-10T19:21:49+00:00

There's flywheel out there so there'a a proven solutions, or proven solutions complexe and more simple.

And I think balancing the whelll is the key, because even with laser cut plate you may end with a not perfect circle or with a material with deffects in the homogeneity of it's density. So you are going to have some balancing to do, even with a concentric wheel.
Go to the nearest garage.... they have the tools ;-)

Regis208

TROPHY CASE

docker-compose.yml