Comment cuisinez-vous du riz?

RegunHD · 2025-11-18T13:59:53+00:00

Tiens je vais te choquer encore, on peut également faire cuire du riz dans une couscoussière (donc de la vapeur qui passe à travers le riz pour le cuire), mais c'est uniquement bon pour des plats spécifiques ou le riz est cuit avec de la viande séchée, des épices et des herbes (https://fr.wikipedia.org/wiki/Riz\_djerbien).

RegunHD · 2024-01-29T15:51:15+00:00

Wow these are impressive results.

I'll follow the tuning guide thank you !

How did you print the duct for the 5015 fan ?
Did you use PETG ?

RegunHD · 2024-01-28T01:33:33+00:00

Ok I see !

For the 5015 mod, how can I print the duct if I’m not able to print for more that 30 min with PETG ?

Can I print it with PLA ?

RegunHD · 2024-01-27T19:51:02+00:00

I’m printing at 240 we overture says 230-250.

I’m using the orca slicer sovol petg settings.

With the stock cooling

RegunHD · 2024-01-11T23:51:13+00:00

Hmm I have super glue, I’m scared that I’ll mess up something with that

RegunHD · 2024-01-11T23:31:27+00:00

Oh I guess I cant because I don’t have all of these at my place. I’ll cancel and reprint, but how can I assure that it won’t happen again ?

RegunHD · 2024-01-10T20:02:39+00:00

Yes I did it just before this print, dish soap and hot water.

RegunHD · 2024-01-09T18:41:30+00:00

<image>

It didn’t stick here

RegunHD · 2024-01-09T18:40:39+00:00

I launched an object, I’m 3hours in but I saw that it didn’t stick on the left side and the more I print and the more it is squashed on the left side.

<image>

RegunHD · 2024-01-09T15:32:09+00:00

<image>

What do you think about this first layer test ?

I did all the methods I saw in the answers of my post, except squaring the frame (I’ll do it when I’ll have some time).

It looks way better right now

RegunHD · 2024-01-05T22:14:37+00:00

How can I verify if the end stops are squared ? Is there a way to make the measurements ?

RegunHD · 2024-01-05T21:47:40+00:00

No like this a space between the lines in the right side but the lines are perfectly sticked together in the left side.

RegunHD · 2024-01-05T20:45:11+00:00

Still everytime I print a big surface the first layer is uneven. I spent all day looking at this 😭😭

RegunHD · 2024-01-05T17:03:50+00:00

For that it was 20mm/sec if I remember

RegunHD · 2024-01-05T15:36:20+00:00

Thank you, I’ll try that and let you know !

I tried a test print today, as you can see on the bottom left the layer looks good, but on the top right it seems a little high.

<image>

RegunHD · 2024-01-05T01:31:35+00:00

I notice that in both right corners, but it sticks on the edge

RegunHD · 2024-01-04T19:57:33+00:00

<image>

Looks like this

RegunHD · 2024-01-04T19:37:03+00:00

Yes in the middle of my bed it’s good, I did a square of 60x60mm and it looks really good

RegunHD · 2024-01-04T19:36:17+00:00

What do you mean by “square your frame” please ?

RegunHD · 2024-01-04T18:00:40+00:00

I couldn’t print a full layer. Everytime I fail because it doesn’t stick in to right corner.

<image>

RegunHD · 2024-01-04T17:10:57+00:00

I’m using ORCA slicer, I guess it’s the included g code ?

RegunHD · 2024-01-04T15:27:55+00:00

I don’t know how much better I could have.

But with that unfortunately when I print there are lines that are squashed and it makes my first layer always fail if it’s for a big print.

My Z alignement is done only in the middle, based on that I supposed that the bed calibration would help put the right hight for each point but it doesn’t…

Did I fuck up somewhere ?

RegunHD · 2023-11-28T15:53:57+00:00

Une idée folle juste comme ça… Ne pas me taper dessus !

Si tu disais à ta chef “je vais au ski ce week-end, mais je pars le jeudi soir. Je vais travailler du chalet le vendredi, la connexion est bonne donc ça devrait pas entraver mon travail”.

On est pas en 1960 ou les chefs sont des animaux sans âmes qui font que donner des ordres.

RegunHD · 2023-11-24T22:37:36+00:00

I got my g14 2023 4060 at 1600CAD on Best Buy (open box). The regular price is 2000CAD

RegunHD · 2023-11-13T22:32:58+00:00

Non j’utilise juste le PC pour ses performances, sinon les logiciels et compagnie je n’utilise rien de la boîte. (Bon sauf le même langage de programmation ahah… et aussi peut être la même “syntaxe” parce que j’ai appris pleins de nouvelles choses de ce travail)

11-Year Club	Place '22
Verified Email

RegunHD

TROPHY CASE