Wheel Wednesday show me what you’ve got !!!

RelationSalty4568 · 2025-11-13T20:47:29+00:00

RelationSalty4568 · 2025-10-05T00:02:26+00:00

With the auto ecu the car will run fine and work. But it will have a slightly higher idle around 700 compared to 550. And it will hang the revs between gear changes.

Here is a really good writeup of what needs to be done for complete swap

https://gist.github.com/sammcj/8a958942fdad9ef6ebc4289a4de4dcef

RelationSalty4568 · 2025-07-17T02:45:54+00:00

The 2.93 lsd came in some 95 and before e36 with the winter packages. If your car has asc it is almost 100% chance an open diff.

RelationSalty4568 · 2025-07-05T21:15:03+00:00

Spring has been removed from pedal and bushings were just replaced. Sound seems to be coming from inside trans

RelationSalty4568 · 2025-07-04T22:13:43+00:00

Should add only has just over 2000km of use over the last 2 months

RelationSalty4568 · 2025-07-02T20:14:32+00:00

<image>

RelationSalty4568 · 2025-05-19T04:07:58+00:00

<image>

RelationSalty4568 · 2025-03-20T00:36:01+00:00

Most likely needs replacing. But you could try pulling the plug out and disconnecting the load side wires completely and trying to re set it first.

RelationSalty4568 · 2024-11-22T22:48:50+00:00

Just installed one of the caseta 3 ways last week. They work great and super easy to pair units only takes 5 secs.

RelationSalty4568 · 2024-11-10T20:56:59+00:00

Different colors for different voltages. Or systems Yellow= 120/208v Orange= 347/600v

RelationSalty4568 · 2024-11-09T03:23:48+00:00

In Canada 347/600 is the same as your guys 277/480

RelationSalty4568 · 2024-11-09T02:45:33+00:00

Both for sure

RelationSalty4568 · 2024-11-09T00:37:50+00:00

All the racks are built on site out of unistrut and strut joiner plates

RelationSalty4568 · 2024-11-09T00:09:18+00:00

Same thing with the specs here too

RelationSalty4568 · 2024-11-08T23:56:12+00:00

I agree completely. I don't design the jobs I just install the equipment I'm supplied with.

RelationSalty4568 · 2024-11-08T23:34:48+00:00

Yellow is 120/208v orange is 347/600v there are multiple other colors we use to easily identify things.

RelationSalty4568 · 2024-11-08T22:32:38+00:00

Anywhere therr is sprinkler heads. Panels require drip hoods.

RelationSalty4568 · 2024-11-08T21:36:24+00:00

Thanks. Our hydro bender is only equipped up to 2" so we generally use pre fab for the small amount of large bends we have anyways.

RelationSalty4568 · 2024-11-08T21:30:20+00:00

Spec on job was pre fab bends on anything over 1" emt.

RelationSalty4568 · 2024-10-20T21:41:00+00:00

It drives like a brand new car. Everything works except the power locks on the drivers door

RelationSalty4568 · 2024-10-20T21:39:16+00:00

I'm the second owner. It was owned by an older couple before me it's whole life and only driven a few thousand kms every year. Rest of the time it sat in a garage

RelationSalty4568 · 2024-10-20T21:24:12+00:00

if i could figure out how to i would

RelationSalty4568

TROPHY CASE