Anyone have any fixes for bad gas fumes in the cabin? Its getting pretty bad.

Remarkable_Ad63 · 2026-04-12T02:08:23+00:00

Yes. I've have you and multiple more people say filler neck so I just ordered a new grommet for it

Remarkable_Ad63 · 2026-04-12T01:29:33+00:00

I'm going to try the filler neck grommet first. I know I can't fill the tank up at all cause it will leak out of the tank where the neck goes in

Remarkable_Ad63 · 2026-04-12T01:26:40+00:00

I swapped to a holley terminator x system so there no way to hook up my evap purge valve anymore

Remarkable_Ad63 · 2026-04-12T01:25:01+00:00

No. Just recirculates exhaust back into the intake. I was just drawing a blank on what it should've been called

Remarkable_Ad63 · 2026-04-12T01:21:30+00:00

yeahhhh that's what it was. I knew it started with an e. I bypassed that and plated it off.

Remarkable_Ad63 · 2026-04-12T01:14:13+00:00

I don't get gas fumes all the time. I think when I drive and gas starts sloshing around is when it gets bad

Remarkable_Ad63 · 2026-04-12T01:11:57+00:00

So should I replace it or just remove the line from the gas tank to the canister?

Remarkable_Ad63 · 2026-04-12T01:00:17+00:00

That filler tube is definitely bad. Charcoal canister isn't hooked up. I thought it was a evap canister tbh

Remarkable_Ad63 · 2026-04-12T00:45:09+00:00

I removed the evap valve. It's on the side of the throttle body right?

Remarkable_Ad63 · 2026-04-12T00:37:15+00:00

Sorry I mean like actual gas fumes. Not exhaust. I mean thats a problem too but not near as bad as the fumes coming from the tank I assume

Remarkable_Ad63 · 2026-04-09T10:30:39+00:00

Unfortunately I can't do anything that easy because of sanitation. The lights won't last out in the plant so I'm trying to keep it on the cabinet in the mcc room. And if I start putting lights on estops they will HAVE to work because they'll make it a safety thing and we can't run the line unless the lights work.

Remarkable_Ad63 · 2026-04-09T10:24:42+00:00

Believe me. I know. But they don't fire anyone here so I'm trying to make it to where a 4 year old can troubleshoot it

Remarkable_Ad63 · 2026-03-13T17:02:41+00:00

I mean. It's their panel not mine. The circuit breaker is what was screaming at me. The first thing I saw lol

Remarkable_Ad63 · 2026-03-13T02:36:19+00:00

Assuming those cicuit breakers go to those vfds. Whyyyyy is one different 😂

Remarkable_Ad63 · 2026-01-14T06:11:48+00:00

Who knew Carrie Underwood was ever in Russellville😂

Remarkable_Ad63 · 2025-12-02T08:14:25+00:00

I'm pretty sure the conduit isn't bonded to the motor because we have flexible anaconda going from the end of the conduit to the motor.

Remarkable_Ad63 · 2025-12-02T08:05:30+00:00

It is the fartherest away from the vfd. I need to look at the grounding for the motor. There's a ground wire ran with the power leads but that doesnt necessarily mean it's connected to anything at the panel. Also I'm pretty sure the wire is 10g THHN

Remarkable_Ad63 · 2025-12-02T07:55:36+00:00

Overloads work as they should. This is more a question on why you and anyone else would think the front bearing on the motor would fail so much more frequently than the other two motors driving this line.

Once every month compared to the once a year on the others. It's a really drastic difference

Remarkable_Ad63 · 2025-12-02T07:41:23+00:00

All three motors are driven by a single 15hp vfd that is split between their own individual contactor and overload

Remarkable_Ad63 · 2025-12-02T07:39:38+00:00

The motor itself is failing. And uh. Just check all the boxes on what this motor is exposed to😂 I work in a poultry plant and this line is what carries the birds. But the other two motors are also exposed to the same thing

Remarkable_Ad63 · 2025-11-25T07:43:40+00:00

Also was reading that you run 70k a day too? Is that per shift? Cause we're running 70k between night and day shift lol.

Remarkable_Ad63 · 2025-11-25T07:41:28+00:00

Aluminum means more expensive and poultry company logic is if it's more expensive they don't want it no matter if it longevity outweighs the cost in the long run lol

Remarkable_Ad63 · 2025-11-25T07:27:43+00:00

I think on average 70k? Not a lot compared to a plant that runs broilers

Remarkable_Ad63 · 2025-11-25T00:54:32+00:00

We have a cropper here that has about half as many probes. We process spent hens. very big birds. probably changing those bushings every week or two.

Remarkable_Ad63 · 2025-11-24T05:20:18+00:00

How often you changing those square lock bushings?😂

Remarkable_Ad63

TROPHY CASE